Welcome
Configuring
After you install BigFix Inventory, configure the application. Create accounts for the users who need access to the application and set up scans to collect software and hardware inventory data from your environment.
Setting up scans to discover software and hardware inventory
The scanner is an independent, well-defined component that is used by BigFix Inventory. It is installed and managed through the BigFix client, and it enables the software and capacity scans. Software and capacity scans collect data that is later on displayed on the BigFix Inventory reports. For environments with up to a few thousand computers, you can enable the default scan configuration. In this case, the analyses are activated and software and capacity scans as well as uploads of their results are scheduled automatically on the computers that are subscribed to the BigFix Inventory site. For larger environments, it is advisable to divide the computers into groups and manually configure a separate scan schedule for each group to avoid performance issues.
Discovering software and hardware on IBM i
Available from 9.2.5. You can discover software and hardware inventory on IBM i systems by using disconnected scans that do not require direct connection between the scanned computers and BigFix server. Scripts that are provided in the disconnected scanner package initiate software and capacity scans, and prepare scan results that you later on upload to BigFix Inventory.
Disconnected scanner maintenance and troubleshooting
Available from 9.2.5. You can use the maintenance and troubleshooting tasks related to the disconnected scanner to monitor the scan progress, optimize the processor usage during the scan, understand and fix the most common issues, or learn more about the log files.
Updating the scanner and the scripts
Available from 9.2.5. Both the scanner and the scripts are updated on a regular basis to introduce improvements and new functions. To update the scanner, once again download all the required files, and copy them into the /cit directory in IFS on your IBM i system, or other directory where the previous version is already located.

BigFix Documentation Homepage
BigFix 10 Inventory Documentation
Overview
Become familiar with key concepts that are necessary to understand how BigFix Inventory works and learn about features and functions that are introduced in every version of the application.
Installing
Learn about the requirements and available installation scenarios to ensure that the deployment of BigFix Inventory goes smoothly in your environment.
Configuring
After you install BigFix Inventory, configure the application. Create accounts for the users who need access to the application and set up scans to collect software and hardware inventory data from your environment.
- Creating users and groups
  Each user who has access to BigFix Inventory must be assigned a role and a computer group. The role defines which reports and panels the user can view. The computer group narrows down the scope of these reports and panels to computers that meet certain criteria.
- Setting up scans to discover software and hardware inventory
  The scanner is an independent, well-defined component that is used by BigFix Inventory. It is installed and managed through the BigFix client, and it enables the software and capacity scans. Software and capacity scans collect data that is later on displayed on the BigFix Inventory reports. For environments with up to a few thousand computers, you can enable the default scan configuration. In this case, the analyses are activated and software and capacity scans as well as uploads of their results are scheduled automatically on the computers that are subscribed to the BigFix Inventory site. For larger environments, it is advisable to divide the computers into groups and manually configure a separate scan schedule for each group to avoid performance issues.
  - Frequency of scans and uploads of data
    By default, software and capacity scans are scheduled with a frequency that meets auditing requirements. If you want to change the default frequency, ensure that the new setup fulfills the minimal requirements and all considerations.
  - Default scan configuration
    Default scan configuration is advised for environments with up to a few thousand computers. It ensures that the required analyses are activated and software and capacity scans as well as uploads of their results are scheduled automatically. These actions are necessary to collect data from the computers in your infrastructure and to display it on the BigFix Inventory reports. You can enable the default scan configuration during the configuration of BigFix Inventory connections to the databases or when adding another data source.
  - Manual scan configuration
    Manual scan configuration is advised for environments with more than a few thousand computers. It requires that analyses are activated and software and capacity scans as well as uploads of their results are scheduled manually after the installation. These actions are necessary to collect data from the computers in your infrastructure and display in on the BigFix Inventory reports. Flexibility of the manual scan configuration allows for avoiding performance issues that might occur when you scan too many computers at the same time.
  - Advanced scan configuration
    After you successfully schedule software and capacity scans and the scan data is displayed on the BigFix Inventory reports, you can further customize the scans. For example, you can exclude directories from software scans or scan remote shared file systems.
  - Discovering software and hardware on IBM i
    Available from 9.2.5. You can discover software and hardware inventory on IBM i systems by using disconnected scans that do not require direct connection between the scanned computers and BigFix server. Scripts that are provided in the disconnected scanner package initiate software and capacity scans, and prepare scan results that you later on upload to BigFix Inventory.
    - Disconnected scanner requirements
      The list of disk space requirements, the supported IBM i version compatible with the disconnected scanner and other relevant requirements.
    - Adding a new data source for disconnected scans
      Available from 9.2.5. All scan results are imported to BigFix Inventory from a directory dedicated to disconnected scans. You must add this directory as a data source to allow BigFix Inventory to check its content and import all packages that are stored within. The packages are imported during each data import.
    - Preparing installation files for disconnected scans
      Available from 9.2.5. After you add the data source, prepare the installation package and distribute it to IBM i endpoints. The package should contain the disconnected scanner and configuration files used to initiate the scans. These files are downloaded from the BigFix console.
    - Installing the scanner and gathering initial data
      Available from 9.2.5. After you distribute the disconnected scanner package to the computers in your infrastructure, install the scanner and run the initial scans.
    - Running software scans and gathering scan results on IBM i systems
      Available from 9.2.5. The script that is responsible for the software scan collects the results of the catalog-based, package data, and software ID tags scan as well as retrieves results of the capacity scan and the computer.yml file. All these results are combined and compressed into a common ZIP package that can be imported to BigFix Inventory.
    - Importing scan results to BigFix Inventory
      Available from 9.2.5. To import new scan results to BigFix Inventory, copy the package to the disconnected scans directory that you added as a data source.
    - Disconnected scanner maintenance and troubleshooting
      Available from 9.2.5. You can use the maintenance and troubleshooting tasks related to the disconnected scanner to monitor the scan progress, optimize the processor usage during the scan, understand and fix the most common issues, or learn more about the log files.
      - Updating the scanner and the scripts
        Available from 9.2.5. Both the scanner and the scripts are updated on a regular basis to introduce improvements and new functions. To update the scanner, once again download all the required files, and copy them into the /cit directory in IFS on your IBM i system, or other directory where the previous version is already located.
      - Decommissioning computers with disconnected scanners
        Available from 9.2.5. When you decommission a computer that is no longer in use, you can mark it as decommissioned on the Computers report, so that it is not displayed in BigFix Inventory.
      - Uninstalling the disconnected scanner
        If you no longer need the disconnected scanner to scan the IBM i system, you can uninstall it from any endpoint.
      - Understanding the Deployment Health and Software Scan Health
        Available from 9.2.5. Deployment Health and Software Scan Health contain information about your clients and the scans that were initiated. You can view this information on the Deployment Health, and Software Scan Health widgets on the dashboard, or on the Computers report. Deployment Health excludes all the disconnected datasource endpoints. To properly understand values that are displayed for IBM i systems, see the explanation of particular columns on the Computers report.
      - Using NFS to automate the transfer of scan results
        Available from 9.2.5. You can use NFS to automate the transfer of scan results from your IBM i systems to the BigFix Inventory server. The results will be stored in a shared directory and imported by BigFix Inventory without any additional actions.
      - Monitoring the scan progress
        Available from 9.2.5. In case of any problems with the software scan, you can check whether the scan was started or completed, and view some extra information about the scanned directories.
      - Troubleshooting the discovery
        Available from 9.2.5. The troubleshooting section lists the most common issues you might encounter while discovering software and hardware inventory with the disconnected scanner. The main objective of troubleshooting is to determine why something does not work as expected and explain how to resolve the problem.
    - (Optional) Manually installing the scanner and running the scans
      Available from 9.2.5. scripts that automate the scans are not appropriate for your environment, and you need to customize the execution of scans without changing the required scan frequency, refer to this appendix. The appendix describes how to run each scan, how to collect the results, and finally how to create the final package that can be uploaded to BigFix Inventory manually. The automated scripts, however, remain a recommended way of discovering on IBM i systems.
- Performing optional configuration
  You can perform optional configuration tasks to further customize the application.
- Classifying the BigFix client used by multiple BigFix products
Upgrading
A new version of BigFix Inventory is released periodically, typically at the end of each calendar quarter. Upgrade to the new version regularly to take full advantage of new features and application fixes.
Managing the infrastructure
After you complete the initial configuration of BigFix Inventory, learn how to manage components of its infrastructure: VM managers, server, database, and data sources.
Software inventory and license utilization
You can classify the discovered software so that reports in BigFix Inventory reflect your entitlements and properly show utilization of license metrics by particular products.
Managing security threats
Learn how to use BigFix Inventory to manage security threats in your environment. You can view whether any of the installed components is prone to any Common Vulnerability and Exposure (CVE).
Tutorials
Tutorials help you understand how to use BigFix Inventory. They consist of modules that focus on broad goals. Modules consist of tasks that show how to configure specific settings step-by-step.
Security
Configure different security features to adequately protect business assets and resources in the data model when using BigFix Inventory.
Troubleshooting and support
Learn about solutions to common problems that might arise when you use BigFix Inventory BigFix Inventory and how to find logs and trace files that help you troubleshoot those problems.
Tuning performance
Learn how to plan the infrastructure of BigFix Inventory and to configure the application server to achieve optimal performance. The following guidelines are applicable in big data environments as well as in smaller environments that are running on low-performance hardware.
Integrating with REST API
External systems integration is one of the key features of BigFix Inventory. Business logic is enabled for integration and interfaces are provided for common integration points.
Glossary
Guide in PDF format

Updating the scanner and the scripts on IBM i systems

Available from 9.2.5. Both the scanner and the scripts are updated on a regular basis to introduce improvements and new functions. To update the scanner, once again download all the required files, and copy them into the /cit directory in IFS on your IBM i system, or other directory where the previous version is already located.

Procedure

Log in to the BigFix console.
In the navigation bar, click Sites > External Sites > BigFix Inventory v10 > Fixlets and Tasks.
In the upper right pane, select Download the Disconnected Scanner Package for IBMi (version).
To run the task, click Take Action.
Optional: If you made any changes to the scan configuration file configure_scan.sh, or the software scan configuration file sw_config.xml make sure that you back up the files before you extract the package. Otherwise, the files are overwritten.
Extract the contents to the disconnected scanner directory.
Optional: If you recently updated the software catalog in BigFix Inventory, update it also on the system with the disconnected scanner.
1. To download the software catalog for disconnected scanner, log in to BigFix Inventory and go to Management > Data Source. Choose the disconnected data source, and download the catalog for IBM i.
2. Place the catalog in the config directory of the disconnected scanner package that you downloaded through fixlet.
Note: The catalog is available for download after uploading the main software catalog and running a data import.
Optional: If you made any changes to the scan configuration file configure_scan.sh, or the software scan configuration file sw_config.xml, modify the new file versions to reflect the changes. Look at the back up files that you created in step 5, and rewrite the changes to modify the new files. Do not copy the old back up files as they might differ between the versions.
Run the update.sh script.