twsinst

During the installation process, if you do not specify the installation directory in the command, twsinst creates files in the following directories for each of the installation steps:
On Windows™ operating systems
%ProgramFiles%\HCL\TWA_TWS_USER
On UNIX™ and Linux™ operating systems
/opt/HCL/TWA_TWS_USER
Where TWS_USER is the user for which you are installing the HCL Workload Automation instance that you specify in the command. If you stop and restart the installation, the installation process starts from the installation step where it was stopped.

To install the HCL Workload Automation Agent, perform the following steps:

On Windows™ operating systems
  1. Download the HCL Workload Automation Agent eImage related to your operating system.
  2. Log in as administrator on the workstation where you want to install the product.
  3. In the image_directory\TWS\operating_system\ACTIONTOOLS directory, delete the .distributed file and create an empty file named .zcentric
  4. From image_directory\TWS\operating_system, run twsinst using the syntax described in the following section.
    Note: twsinst for Windows™ operating systems is a Visual Basic Script (VBS) that you can run in CScript and WScript mode.
    The HCL Workload Automation for Z user is automatically created. The software is installed by default in the HCL Workload Automation for Z installation directory. The default value is %ProgramFiles%\HCL\TWA.
On UNIX™ and Linux™ operating systems
  1. Download the HCL Workload Automation Agent eImage related to your operating system.
  2. Create the HCL Workload Automation for Z user. The software is installed by default in the user's home directory, referred to as /installation_dir/TWS
    User:
    TWS_user
    Home:
    /installation_dir/TWS (for example: /home/user1/TWS where user1 is the name of the HCL Workload Automation for Z user.)
  3. Log in as root on the workstation where you want to install the product.
  4. In the image_directory/TWS/operating_system/ACTIONTOOLS directory, delete the .distributed file and create an empty file named .zcentric
  5. From the image_directory/TWS/operating_system directory, run twsinst using the syntax described in the following section.
A successful installation using the twsinst script issues the return code RC = 0. If the installation fails to understand the cause of the error, see Analyzing return codes for agent installation, upgrade, restore, and uninstallation.

Synopsis

On Windows™ operating systems
Show command usage and version
twsinst.vbs -u | -v
Install a new instance
twsinst.vbs -new -uname user_name
    -password user_password
    -agent zcentric
    [-addjruntime true|false]
    [-displayname agentname]
    [-domain user_domain]
    [-hostname hostname]
    [-inst_dir install_directory]
    [-jmport port_number]
    [-jmportssl true|false]
    [-lang lang_id]
    [-skip_usercheck]
    [-stoponcheckprereq]
    [-tdwbport tdwbport_number]
    [-tdwbhostname hostname]
    [-work_dir working_directory]
      [-zhostname zconn_hostname
    [-zport zconn_portnumber]
On UNIX™ and Linux™ operating systems
Show command usage and version
twsinst -u | -v
Install a new instance
twsinst -new -uname user_name
    -agent zcentric
    [-addjruntime true|false]
    [-displayname agentname]
    [-hostname hostname]
    [-inst_dir install_directory]
    [-jmport port_number]
    [-jmportssl true|false]
    [-lang lang_id]
    [-reset_perm]
    [-skip_usercheck]
    [-stoponcheckprereq]
    [-tdwbport tdwbport_number]
    [-tdwbhostname hostname]
    [-work_dir working_directory]
  [-zhostname zconn_hostname
    [-zport zconn_portnumber]

Parameters

-agent zcentric
Installs the HCL Workload Automation Agent.
-addjruntime true|false
Adds the Java™ runtime to run job types with advanced options, both those supplied with the product and the additional types implemented through the custom plug-ins. Valid values are true and false. The default is true.

If you decided not to install Java™ runtime, you can still add this feature at a later time as it is described in Adding a feature.

-domain user_domain
Windows™ operating systems only. The domain name of the HCL Workload Automation user. The default is the name of the workstation on which you are installing the HCL Workload Automation Agent.
-displayname agentname
The name to be assigned to the HCL Workload Automation Agent. The default is the host name.
-hostname hostname
The fully qualified host name or IP address on which the agent will be contacted by the dynamic workload broker.
-inst_dir install_directory
The directory where to install the HCL Workload Automation Agent. On UNIX™ and Linux™, this path cannot contain blanks. On Windows™ operating systems, if you specify a path that contains blanks, enclose it in double quotes. On any operating system, specify an absolute path. If you do not manually specify a path, the path is set to the default home directory. On UNIX™ and Linux™, the path is set to the user_name home directory, and on Windows™ operating systems it is set to .
-jmport port_number

The port used by the HCL Workload Automation for Z controller or the dynamic workload broker to connect to the HCL Workload Automation Agent. The default value is 31114. The valid range is from 1 to 65535.

-jmportssl true|false
The port used by the HCL Workload Automation for Z controller, or by the dynamic workload broker to connect to the HCL Workload Automation Agent. This number is registered in the ita.ini file, located in ITA\cpa\ita on Windows™ operating systems and ITA/cpa/ita on UNIX™ and Linux™.
For communication using SSL or HTTPS
Set jmportssl = true. To communicate with the dynamic workload broker, it is recommended that you set the value to true. In this case, the port specified in jmport communicates in HTTPS. If you specify true, ensure that you also configure the HTTPS communication on the z/OS® master.
For communication without using SSL, or through HTTP
Set jmportssl = false. In this case the port specified in jmport communicates in HTTP.
The default value is true.

To increase the performance of the HCL Workload Automation for Z server, it is recommended that you set this value to false.

-lang lang_id
The language in which the twsinst messages are displayed. If not specified, the system LANG is used. If the related catalog is missing, the default C language catalog is used.
Note: This is the language in which the installation log is recorded, and not the language of the installed engine instance. twsinst installs all languages as default.
-new
A fresh installation of the agent. Installs an agent and all supported language packs.
-password user_password
Windows™ operating systems only. The password of the user for which you are installing HCL Workload Automation Agent. The password can include alphanumeric, dash (-), and underscore (_) characters, and the following symbols: ()!?=ˆ*/˜ [] $`+;:.,@.
-reset_perm
UNIX™ and Linux™ only. Reset the permissions of the libatrc library.
-skip_usercheck
Enable this option if the authentication process within your organization is not standard, thereby disabling the default authentication option. On UNIX™ and Linux™ operating systems if you specify this parameter, the program skips the check of the user in the /etc/passwd file or the check you perform using the su command. On Windows™ operating systems if you specify this parameter, the program does not create the user you specified in the -uname username parameter. If you specify this parameter you must create the user manually before running the script.
-stoponcheckprereq
Stop the installation whenever a problem occurs during the prerequisite check. For more information about the prerequisites, see Product Requirements.
-tdwbhostname hostname
The fully qualified host name of the dynamic domain manager of backup dynamic domain manager used to connect to the HCL Workload Automation Agent. It is used together with the -tdwbport tdwbport_number parameter. It adds the capability to run dynamic workload to the HCL Workload Automation Agent. If not specified, the default value is localhost. This value is registered in the ResourceAdvisorUrl property in the JobManager.ini file.
-tdwbport tdwbport_number
The dynamic domain manager of backup dynamic domain manager HTTP or HTTPS port number used to connect to the HCL Workload Automation Agent. It is used together with the -tdwbhostname host_name parameter to add the capability to run dynamic workload to the HCL Workload Automation Agent. This number is registered in the ResourceAdvisorUrl property in the JobManager.ini file. The default value is 0, meaning that the capability to run dynamic workload to the agent is not added. The valid range is from 0 to 65535.
-u
Displays command usage information and exits.
-uname user_name
The name of the user for which the HCL Workload Automation Agent is installed. This user name is not to be confused with the user performing the installation logged on as root on UNIX™ and Linux™ and as administrator on Windows™ operating systems.

On UNIX™ and Linux™, this user account must be created manually before running the installation. Create a user with a home directory. By default, HCL Workload Automation Agent is installed in the home directory of the specified user.

-work_dir working_directory
The temporary directory used for theHCL Workload Automation installation process files deployment.
On Windows™ operating systems
If you specify a path that contains blanks, enclose it in double quotes. If you do not manually specify a path, the path is set to %temp%\TWA\tws95, where %temp% is the temporary directory of the operating system.
On UNIX™ and Linux™ operating systems
The path cannot contain blanks. If you do not manually specify a path, the path is set to /tmp/TWA/tws95.
-v
Displays the command version and exits.
-zhostname zconn_hostname
The fully qualified host name of the Z connector (this is coincident with the Dynamic Workload Console host name). It is used together with the -zport zconn_port parameter. It adds the capability to download the plug-ins from the Z connector.

This value is registered in the ResourceAdvisorAgent property of the JobManager.ini file.

-zport zconn_portnumber
The HTTP or HTTPS port number of the Z connector (this is coincident with the Dynamic Workload Console port number). It is used together with the -zhostname zconn_hostname parameter to add the capability to download the plug-ins from the Z connector. The valid range is from 1 to 65535.

This value is registered in the ResourceAdvisorAgent property in the JobManager.ini file.

Examples

This example describes how to install the HCL Workload Automation Agent for the user HWA_user and accept the default value to add the runtime environment for Java™. The runtime environment is used to run jobs supplied with the product or implemented through the custom plug-ins, it also enables the capability to remotely run, from the agent, the dynamic workload broker resource command on the server.
On Windows™ operating systems
twsinst.vbs -new
-uname HWA_user
-password qaz12qaz
-jmportssl false
-jmport 31114 
-inst_dir "c:\Program Files\HCL\TWA\TWS_user"
On UNIX™ and Linux™ operating systems
./twsinst -new
-uname HWA_user
-jmportssl false
-jmport 31114
-inst_dir /home/HWA_user/TWA