Welcome
Test Execution Specialist Guide
This guide describes tasks that you must complete before you can configure and run tests in HCL OneTest™ Server. You can find information about configuring runs for the different test types that are supported. You can also find information about other tasks that you can perform on the Resource Monitoring Service, Virtualization, and Integrations with third-party applications. This guide is intended for testers or test execution specialists.
Integrations with other applications
You can integrate certain applications with HCL OneTest™ Server to run tests, view the test results, and create defects.
Integration with Azure DevOps
When you use Azure DevOps for continuous integration and continuous development of your application, you can run tests created for your application and available in a project on HCL OneTest™ Server, in Azure DevOps pipelines by using the HCL OneTest Studio extension.
Task flow for integrating Azure DevOps
The table shows the task flow for integrating HCL OneTest™ Server with Azure DevOps by using the HCL OneTest Studio extension. You must perform these tasks in sequence as listed in the following table. The table also provides you the links to the information about the tasks.

Release Notes
This document includes information about What’s new, installation and upgrade instructions, known issues, and contact information of HCL Customer Support.
System Requirements
This document includes information about hardware and software requirements for HCL OneTest™ Server.
Getting Started Guide
This guide provides an overview of HCL OneTest™ Server. You can find the task flows to get you started with HCL OneTest Server. This guide is intended for new users.
Administrator Guide
This guide describes how to install the HCL OneTest™ Server software.
Test Author Guide
This guide describes how to create and edit test assets in HCL OneTest™ Server, and then publish test assets to the remote Git repository that you have configured in your project. This guide is intended for testers and test managers.
Test Execution Specialist Guide
This guide describes tasks that you must complete before you can configure and run tests in HCL OneTest™ Server. You can find information about configuring runs for the different test types that are supported. You can also find information about other tasks that you can perform on the Resource Monitoring Service, Virtualization, and Integrations with third-party applications. This guide is intended for testers or test execution specialists.
- System modeling
  You can use the system model feature on HCL OneTest™ Server to create a model that simulates an application or system under test. You can define components to represent the actual components in the system under test, define their relationships and then view the components in a system under test as a diagrammatic representation.
- Prerequisites to running tests
  Before you can run a test asset in a project on HCL OneTest™ Server, you must read the information about the different tests assets. You can add a remote static agent, Docker host, or Kubernetes cluster to the project and then select it as an alternate location to run the test assets.
- Management of agents
  You can find information about managing performance agents or API agents that you install on remote computers and then configure the remote agents to register with HCL OneTest™ Server. After the agents are registered, you can add them to your projects and then select them as locations to run tests or virtual services.
- Management of Docker hosts
  You can find information about the tasks that you can perform on remote Docker hosts. After you set up a remote Docker host, you can register the Docker host with HCL OneTest™ Server. You must then add the registered remote Docker host to your project before you can run tests on the remote Docker host location.
- Management of remote Kubernetes clusters
  You can find information about the tasks that you can perform on remote Kubernetes clusters. After you set up a remote Kubernetes cluster, you can register the external cluster with a team space on HCL OneTest™ Server. You must then add the remote cluster to a project before you run test assets or resources on the remote Kubernetes cluster.
- Management of mobile device cloud credentials
  You can find information about managing the credentials that are required to connect to mobile device clouds from HCL OneTest™ Server.
- Test run configurations
  You can configure and run tests in HCL OneTest™ Server after you add the test resources to your project in your team space.
- Configuration of test runs in a GitHub Actions Workflow
  You can configure test runs of test resources that are in a project repository of HCL OneTest™ Server in a GitHub Actions Workflow. You can choose to run test resources that are in your server project in the GitHub Workflow when you do not want to run the test resources without opening the HCL OneTest Server project.
- Configuration of a scan of an application code
  You can use HCL OneTest™ Server to scan your application code for security vulnerabilities similar to using the HCL AppScan CodeSweep plugin to scan code in Visual Studio.
- Management of running tests
  Find information about the tasks that you can perform on a test that you configured for a run either while it runs or after it completes the run.
- Management of virtualized services
  You can find information about the tasks that you can perform on and manage the virtualized services that run on HCL OneTest™ Server. You can start or stop the virtual services that are available to HCL OneTest Server. You can view the routing rules and usage statistics of virtualized services, agents, or intercepts that are connected to HCL OneTest Server.
- Test results
  After the tests, Suites, or schedules are run and completed, you can view the results and open the reports in HCL OneTest™ Server to analyze the verdict, the performance, and statistics. You can also re-execute tests and schedules from the Result page with the same commit id.
- Machine learning capabilities in HCL OneTest™ Server
  HCL OneTest™ Server uses Machine learning (ML) algorithms to analyze test results that match certain requirements and criteria, and then presents the findings as insights and recommendations after the tests are run. You can use the insights and recommendations to interpret the test results and identify the problem areas in the system under test.
- Resource monitoring
  When you apply load to a system under test, the amount of resources consumed by your system is increasing. If the capacity of the resources does not match the load, you can see performance issues in the results. Resource monitoring in HCL OneTest™ Server helps you monitoring the resources of a system and establish the performance metrics and usage data of the system. Thus, you can observe the health of these resources while a schedule is running.
- Configuration of a change management system
  When you use any application to create and track defects (bugs), issues, or other work items, you can configure the application as a change management system on HCL OneTest™ Server. You can then create defects (bugs), issues, or other work items without the need to open your application.
- Integrations with other applications
  You can integrate certain applications with HCL OneTest™ Server to run tests, view the test results, and create defects.
  - Integration plug-in compatibility matrix
    You can find information about the versions of the integration plug-in that are compatible with HCL OneTest™ Server.
  - Integration with Azure DevOps
    When you use Azure DevOps for continuous integration and continuous development of your application, you can run tests created for your application and available in a project on HCL OneTest™ Server, in Azure DevOps pipelines by using the HCL OneTest Studio extension.
    - Task flow for integrating Azure DevOps
      The table shows the task flow for integrating HCL OneTest™ Server with Azure DevOps by using the HCL OneTest Studio extension. You must perform these tasks in sequence as listed in the following table. The table also provides you the links to the information about the tasks.
    - Installing the HCL OneTest Studio extension
      You must install the latest version of the HCL OneTest Studio extension in your Azure DevOps organization before you can use the extension for running your application tests in an Azure DevOps pipeline.
    - Running tests in an Azure DevOps Pipeline
      After you install the HCL OneTest Studio extension in your organization, you can run tests that are available in HCL OneTest™ Server as a job in Azure DevOps pipelines.
  - Integration with HCL® Launch
    You can integrate HCL OneTest™ Server with HCL® Launch to run test assets as a Process from HCL Launch.
  - Integration with IBM® Engineering Test Management
    As a Project Owner, you can integrate IBM® Engineering Test Management as a quality management solution with HCL OneTest™ Server. You can run test assets that are available in a project from Engineering Test Management.
  - Integration with Jenkins
    You can use the HCL OneTest™ Server plug-in to integrate HCL OneTest Server with Jenkins. After you complete the integration, you can run tests assets that are available in a project of HCL OneTest Server from a Jenkins server.
  - Integration with UrbanCode™ Deploy
    You can integrate HCL OneTest™ Server with IBM® UrbanCode™ Deploy to run test assets as a Process from UrbanCode Deploy.
  - Integration with Xray test management for Jira
    When you use Jira as a change management system on HCL OneTest™ Server and you use Xray as the test management application in Jira, you can integrate Xray with HCL OneTest Server. With this integration, you can export the test results of the tests that run on HCL OneTest Server to your Jira project. You can then view and use the test results in your project in Jira.
- Managing access to HCL OneTest™ Server
  Desktop clients and third-party integrations use offline user tokens to connect to HCL OneTest™ Server.
- Working with HCL OneTest™ Server REST services
  When you want to use the HCL OneTest™ Server REST APIs in your test automation scripts, you can view the REST APIs that are exposed by HCL OneTest Server. You can also run the APIs from within your project in HCL OneTest Server.
Test Manager Guide
This guide describes how to manage and track your overall test effort. This guide is intended for test managers.
Troubleshooting
This guide describes how to analyze and resolve some of the common problems that you might encounter while you work with HCL OneTest™ Server.
All Guides (PDF)
You can find the link to view or download the content of the release notes, system requirements, and persona guides of HCL OneTest™ Server as a PDF file.
Security Considerations
This document describes the actions that you can take to ensure that your installation is secure, customize your security settings, and set up user access controls.
Notices
This document provides information about copyright, trademarks, terms and conditions for the product documentation.

Task flow for integrating HCL OneTest™ Server with Azure DevOps

The table shows the task flow for integrating HCL OneTest™ Server with Azure DevOps by using the HCL OneTest Studio extension. You must perform these tasks in sequence as listed in the following table. The table also provides you the links to the information about the tasks.

	Tasks	More information
1	Install HCL OneTest™ Server.	Installation of the server software
2	Create tests in the desktop clients for the application that you want to test.	HCL OneTest™ Performance documentation HCL OneTest™ UI documentation HCL OneTest™ API documentation
3	Create a project on HCL OneTest™ Server and add the test assets that are created in the desktop clients to your project.	Managing server projects
4	Create an organization and a project in Azure DevOps for running jobs in Azure DevOps pipelines.	Creating an organization
5	Access the Visual Studio Marketplace portal and search for the latest version of the `HCL OneTest Studio` extension.	Visual Studio Marketplace
6	Install the latest version of the `HCL OneTest Studio` extension.	Installing the `HCL OneTest Studio` extension
7	Extend the trust certificate if you have used an internal CA certificate.	Certificate authority: Importing and extending lists
8	Run tests in an Azure DevOps pipeline.	Running tests in an Azure DevOps Pipeline