Welcome
Test Execution Specialist Guide
This guide describes tasks that you must complete before you can configure and run tests in HCL OneTest™ Server. You can find information about other tasks that you can perform on the Resource Monitoring Service, Virtualization, and Integrations with third-party applications. This guide is intended for testers or test execution specialists.
Management of virtualized services
You can find information about the tasks that you can perform on and manage the virtualized services that run on HCL OneTest™ Server. You can start or stop the stubs connected to HCL OneTest Server. You can view the stub usage statistics and the routing rules configured for the stubs, agents, or proxies that are connected to HCL OneTest Server.
Prerequisites for running stubs
You can find information about the prerequisite tasks that you must complete before you can run stubs on HCL OneTest™ Server.
Prerequisites for running HTTP stubs
You can find information about the tasks that you must complete before you run HTTP stubs on HCL OneTest™ Server.

Release Notes
This document includes information about What’s new, installation and upgrade instructions, known issues, and contact information of HCL Customer Support.
System Requirements
This document includes information about hardware and software requirements for HCL OneTest™ Server.
Getting Started Guide
This guide provides an overview and describes the task flows to get you started with HCL OneTest™ Server. This guide is intended for new users.
Administrator Guide
This guide describes how to install HCL OneTest™ Server software. After you install the software, you can perform administration tasks such as license configuration, user management, security, memory, and disk usage management, back up and restore user data. This guide is intended for administrators.
Test Author Guide
This guide describes how to create test assets in HCL OneTest™ Server and publish test assets to the Git repository that you have configured. This guide is intended for testers and test managers.
Test Execution Specialist Guide
This guide describes tasks that you must complete before you can configure and run tests in HCL OneTest™ Server. You can find information about other tasks that you can perform on the Resource Monitoring Service, Virtualization, and Integrations with third-party applications. This guide is intended for testers or test execution specialists.
- Prerequisites to running tests
  Before you can configure and run a test in a project on HCL OneTest™ Server, you must read the information about the different tests. You might want to add a remote static agent or a remote Docker host to the project as an alternate location to run the tests.
- Agents overview
  You can find information about the agents that you must install on remote computers and configure the agents with the offline user token so that the agents register with HCL OneTest™ Server. After the agents are registered, you can add them to your projects and then select them as locations to run tests.
- Managing Docker hosts
  You can set up dedicated external Docker hosts to run large tests or run tests remotely to free up the dependency of running tests on the default cluster of HCL OneTest™ Server.
- Test run configurations
  You can configure and run tests in HCL OneTest™ Server after you add the test resources to your project.
- Management of running tests
  Find information about the tasks that you can perform on a test that you configured for a run either while it runs or after it completes the run.
- Management of virtualized services
  You can find information about the tasks that you can perform on and manage the virtualized services that run on HCL OneTest™ Server. You can start or stop the stubs connected to HCL OneTest Server. You can view the stub usage statistics and the routing rules configured for the stubs, agents, or proxies that are connected to HCL OneTest Server.
  - Prerequisites for running stubs
    You can find information about the prerequisite tasks that you must complete before you can run stubs on HCL OneTest™ Server.
    - Prerequisites for running HTTP stubs
      You can find information about the tasks that you must complete before you run HTTP stubs on HCL OneTest™ Server.
    - Prerequisites for running Istio stubs that virtualize services in HCL OneTest™ Server
      You can find information about the tasks that you must complete before you run Istio stubs that virtualize services in HCL OneTest™ Server.
    - Setting up the HTTP proxy
      When you want to run stubs on HCL OneTest™ Server, you can set up an HTTP proxy to route requests to the stubs. You must configure the HTTP proxy with the HCL OneTest Server URL and offline user token generated from HCL OneTest Server so that the HTTP proxy can register with HCL OneTest Server.
  - Starting a stub
    When you have stubs in the API test assets, you can start the stubs contained in the API test assets from the Execution page in HCL OneTest™ Server.
  - Working with HTTP stubs without using proxies
    When you run the HTTP stubs on HCL OneTest™ Server, the endpoint on which the stub is exposed externally uses a host name that includes a generated ID. If a client application is required to call the stub directly via its external host name and not via the HTTP proxy, then you might want to determine the host name to configure the client first before you start the stub.
  - Viewing routing rules
    When stubs are created to run on agents or proxies, or have routing rules defined, and you run such stubs on HCL OneTest™ Server, you can view the agents, proxies, or the routing rules from the Routing Rules page.
  - Viewing stub usage statistics
    After you start stubs that are connected to HCL OneTest™ Server, and then run tests on the stub, you can view the stub usage statistics from the Stub Usage page on HCL OneTest Server.
  - Stopping a stub
    When you want to stop a stub that is running in HCL OneTest™ Server, you can stop the running stub from the Progress page. You must stop a running stub after you have completed running tests that are used by the stub.
- Test results
  After the tests or schedules are run and completed, you can view the results and reports in HCL OneTest™ Server to analyze the verdict, the performance, and statistics. You can also re-execute tests and schedules from the Result page with the same commit id.
- Resource Monitoring service
  When you apply load to a system under test, the amount of resources consumed by your system is increasing. If the capacity of the resources does not match the load, you can see performance issues in the results. The Resource Monitoring service in HCL OneTest™ Server helps you monitoring the resources of a system and establish the performance metrics of the system. Thus, you can observe the health of these resources while a schedule is running.
- Integration with Jira as a defect management system
  You can integrate Jira as a defect management system with your project on HCL OneTest™ Server to create defects for the tests that are available in the project after the test run is complete.
- Integrating with other applications
  You can integrate certain applications with HCL OneTest™ Server to run tests, view the test results, and create defects.
- Managing access to the server
  Desktop clients and third-party integrations use offline user tokens to connect to HCL OneTest™ Server.
Test Manager Guide
This guide describes how to manage and track your overall test effort. This guide is intended for test managers.
Reference Guide
This guide describes conceptual information about data design environment components when you want to use the data fabrication feature in HCL OneTest™ Server.
Troubleshooting Guide
This guide describes how to analyze and resolve some of the common problems that you might encounter while you work with HCL OneTest™ Server.
All Guides (PDF)
You can find the link to view or download the content of the release notes, system requirements, and persona guides of HCL OneTest™ Server as a PDF file.
Security Considerations
This document describes the actions that you can take to ensure that your installation is secure, customize your security settings, and set up user access controls.
Notices
This document provides information about copyright, trademarks, terms and conditions for the product documentation.

Prerequisites for running HTTP stubs

You can find information about the tasks that you must complete before you run HTTP stubs on HCL OneTest™ Server.

Conditions for running of HTTP stubs

Before you run the HTTP stubs from HCL OneTest™ Server, you must check for the following conditions and perform the actions indicated:


If...	Then...
You want to route the HTTP traffic via the HTTP proxy either to the stubs or live systems, based on routing rules.	You must set up the HTTP proxy. See Setting up the HTTP proxy.
You are working with HCL OneTest™ Server V10.1.2 installed on Ubuntu.	HTTP stubs are exposed via host names as the default action and are of the following form: in-<unique_id>.<INGRESS_DOMAIN> Note: The DNS used by a computer that runs a client application or the HTTP proxy that routes traffic to the stubs can resolve such host names to the IP address of the ingress domain. You must perform the following actions that depend on the way you have set up the ingress domain: If you used nip.io, to form the ingress domain, then that stub host names are automatically resolved to the IP address of the ingress domain. For example, if you used nip.io to form the ingress domain as follows: 10.1.2.3.nip.io Then the stub host names are resolved by nip.io to the IP address as 10.1.2.3. If you did not use nip.io to form the ingress domain, then you must ensure that the DNS in use by the client application or the HTTP proxy resolves the ingress domain to the IP address of the ingress domain. For example, if the ingress domain is of the following form: *.<INGRESS_DOMAIN> Then the host name must resolve to the <INGRESS_DOMAIN_IP_address>.