Agent installation parameters

Specify whether to accept the License Agreement.

Adds the Java™ run time to run job types with advanced options, both those types that are supplied with the product and the additional types that are implemented through the custom plug-ins. Valid values are true and false. The default for a fresh installation is true.

Note: Only for version 10.1 and subsequent fix packs, the addjruntime parameter is ignored and Java runtime is always installed automatically.

The type of agent that you want to install. Valid values are:

dynamic: To install the HCL Workload Automation dynamic agent. Use this value with the -tdwbhostname host_name and the -tdwbport tdwbport_number parameters.
On Windows operating systems, you can install dynamic agents and z-centric agents using the Local System Account. To install with the Local System Account, omit the uname and password parameters.
fta: To install the HCL Workload Automation fault-tolerant agent.
both: To install the dynamic agent that is used with the -tdwbhostname host_name and the -tdwbport tdwbport_number parameters, and a fault-tolerant agent.
zcentric: To install the HCL Workload Automation Agent (also known as agent with z-centric capabilities).; On Windows operating systems, you can install dynamic agents and z-centric agents using the Local System Account. To install with the Local System Account, omit the uname and password parameters.

The default is dynamic.

The unique identifier of the agent that you want to install. The parameter is optional. If not specified, the installation process assigns to the agent a string of alphanumeric characters, as in the following example:


893164748CCA4FC6820F12685AECBB07

It might be useful to specify an agent_id when you want to reinstall an agent after it was uninstalled, and you want to use the same agent_id. This prevents that two different agent_id values are registered on the server for the same agent installation.

Note: When you manually specify the agent_id value, ensure that the length is 32 characters, otherwise an error occurs.

If you set the jwt parameter to true, the agentId parameter is ignored if provided, because the agent ID is retrieved from the master domain manager together with the JWT. See -jwt true | false.

Use this parameter to specify the API key to be used for authenticating with the master domain manager. This authentication enables downloading the certificates or JWT to be used for communication between dynamic agent and dynamic domain manager. This parameter is mutually exclusive with the wauser and wapassword parameters. Obtain the string to be provided with this parameter from the Dynamic Workload Console before running the command. For more information, see Authenticating the command line client using API Keys.

The name of the company. The company name cannot contain blank characters. The name is shown in program headers and reports. If not specified, the default name is COMPANY.

UNIX™ systems only. Create the symlink between /usr/bin/at and install_dir/TWS/bin/at. For more information, see Symbolic link options.

This argument applies to UNIX operating systems only. Specify a path for product data, such as log and configuration files, if you want to install the product binaries separated from the product data. This argument is optional. The default value is INSTALL_DIR/TWSDATA.

The name to assign to the agent. The name cannot start with a number. The default is the host name of this computer.

If the host name starts with a number, the -displayname parameter must be specified.

Windows™ systems only. The domain name of the HCL Workload Automation user. The default is the name of the workstation on which you are installing the product. Ensure you use USERDOMAIN instead of USERDNSDOMAIN.

The password for the keystore storing the AES-256 or AES-128 keys used to encrypt the files at runtime. This parameter is optional. The default value is default. You can optionally encrypt the password using the secure script. For more information, see Optional password encryption - secure script.

Specifies whether to configure a gateway to communicate with the dynamic workload broker or not, and how it is configured. Specify local if the gateway is local to the dynamic agent workstation. Specify remote if the dynamic agent communicates through a gateway that is installed on a different dynamic agent workstation from the dynamic agent being installed. The default value is none, which means no gateway is configured. For information about installing with a local and remote gateway, see Example installation commands.

Specifies the Job Manager Event Integration Facility (EIF) port number. The default value is 31132. The valid range is 1 to 65535.

The unique identifier for the gateway. This parameter is required when you specify -gateway local. The default gateway identifier that is assigned is GW1. The gateway identifier must start with either an alphabetic character or an underscore character (_), and it can contain only the following types of characters: alphabetic, numeric, underscores (_), hyphens (-), and periods (.).

Gateways can also work in parallel to mutually take over in routing communications to the agents connected to them. To enable gateways to work in parallel, all gateways must have the same gateway_id assigned. This information is stored in the JobManagerGW.ini file, by setting the JobManagerGWURIs property.

The fully qualified hostname or IP address on which the agent is contacted by the dynamic workload broker. The default is the hostname of this computer. If the hostname is a localhost, the hostname parameter must be specified.

The directory of the HCL Workload Automation installation.

On Windows™ operating systems:

If you specify a path that contains blanks, enclose it in double quotation marks. Specify an absolute path. If you do not manually specify a path, the path is set to %ProgramFiles%\HCL\TWA_TWS_USER, where TWS_USER is the user for which you are installing the HCL Workload Automation that you specify in the -uname parameter. If you use the Local System Account and therefore do not specify the -uname parameter, the path is set to %ProgramFiles%\HCL\TWA_WaLocalSystemAccount.

On UNIX™ and Linux™ operating systems:

If you specify a path that contains blanks, enclose it in double quotation marks. Specify an absolute path. If you do not manually specify a path, the path is set to:

/opt/HCL/TWA_TWS_USER, if you logged in as the root user to install the agent. TWS_USER is the user that you specify in the -uname option and for which you are installing the agent (can omit if TWS_USER is root). The HCL Workload Automation user that you specify in the -uname username parameter must have read and run privileges for the installation_dir installation path; otherwise the installation fails.
home_dir/TWA, if you logged in with a login other than root. Ensure that the directory permission is set to 755 for home_dir, the home directory for your login, and that you are the home_dir owner.

The JobManager port number used by the dynamic workload broker to connect to the dynamic agent. The default value is 31114. The valid range is from 1 to 65535.

The JobManager port used by the dynamic workload broker to connect to the HCL Workload Automation dynamic agent. The port value is the value of the ssl_port parameter in the ita.ini file if -jmportssl is set to true. If set to false, it corresponds to the value of the tcp_port parameter in the ita.ini file. The ita.ini file is located in ITA\cpa\ita on Windows™ systems and ITA/cpa/ita on UNIX™, Linux™, and IBM i systems.

Set the value to "true" if - gateway is set to local.

For communication using SSL or HTTPS: Set jmportssl = true. To communicate with the dynamic workload broker, it is recommended that you set the value to true. In this case, the port specified in jmport communicates in HTTPS.
For communication without using SSL or through HTTP: Set jmportssl = false. In this case the port specified in jmport communicates in HTTP.

Specify true to use the JSON Web Token (JWT) to authenticate with the master domain manager. Specify false to authenticate with the master domain manager using certificates. The default value is true. This parameter is mutually exclusive with the sslkeysfolder and sslpassword parameters which are used to generate custom certificates.

If you set this parameter to true, the agentId parameter is ignored if provided, because the agent ID is retrieved from the master domain manager together with the JWT. See -agentid agent_id. Also, if you set this parameter to true, the following parameters are required for downloading the JWT:

wauser or apikey. See -wauser wauser_name or -apikey.
wapassword or apikey. See -wapassword wauser_password or -apikey.
tdwbhostname. See -tdwbhostname host_name.
tdwbport. See -tdwbport tdwbport_number.

For examples of installations with JWT, see Example installation commands.

The language in which the twsinst messages are displayed. If not specified, the system LANG is used. If the related catalog is missing, the default C language catalog is used. If neither -lang nor LANG are used, the default codepage is set to SBCS. For a list of valid values for these variables, see the following table:

Table 1. Valid values for -lang and LANG parameter
Language	Value
Brazilian portuguese	pt_BR
Chinese (traditional and simplified)	zh_CN, zh_TW
English	en
French	fr
German	de
Italian	it
Japanese	ja
Korean	ko
Russian	ru
Spanish	es

Note: This is the language in which the installation log is recorded and not the language of the installed engine instance. twsinst installs all languages as default.

The workstation name of the master domain manager. This name cannot exceed 16 characters, cannot contain spaces, and cannot be the same as the workstation name that you entered in the thiscpu parameter. If not specified, the default value is MASTER.

A fresh installation of the agent. Installs an agent and all supported language packs.

Windows™ systems only. The password of the user for which you are installing HCL Workload Automation. The password can include alphanumeric, dash (-), and underscore (_) characters, and the following symbols: ()!?=ˆ*/˜ [] $`+;:.@. The -password parameter is used for fresh installations only, it is not required for fix packs or upgrades. You can optionally encrypt the password using the secure script. For more information, see Optional password encryption - secure script.

On Windows operating systems, you can install dynamic agents and z-centric agents using the Local System Account. To install with the Local System Account, omit the uname and password parameters.

The TCP/IP port number used by the netman process to listen for communication from the master in SSL mode. The default value is 31113. The valid range is from 1 to 65535. You can also set the netmansslport parameter to disabled to use non-encrypted communication. If you set the netmansslport parameter to disabled, you must provide a value for the netmanport parameter. This port number is registered in the localopts file, in the nm ssl full port attribute. For each installation you must specify a different number.

The TCP/IP port number used by the Netman process to listen for communication from the master. The default value is 31111. The valid range is from 1 to 65535. This port number is registered in the localopts file. For each installation you must specify a different number.You can also set this parameter to disabled. In this case, you must provide a value for the netmansslport parameter, which enables SSL communication.

UNIX™ and IBM i systems only. Reset the permission of the libraries in the /usr/hcl directory.

Run this command from the folder to where you copied the eImage (a folder other than the home directory of TWS_USER, where TWS_USER is the user that installed the HCL Workload Automation instance), and not from the installation path, to restore the version in the eImage.

Enable this option if the authentication process within your organization is not standard, thereby disabling the default authentication option.

On Windows™ systems, if you specify this parameter, the program does not create the user you specified in the -uname username parameter and you must create the user manually before running the script. However, if you use Local System Account, you do not need to specify any user.

On UNIX™ and Linux™ systems if you specify this parameter, the program skips the check of the user in the /etc/passwd file or the check you perform using the su command.

If you specify this parameter, HCL Workload Automation does not scan system prerequisites before installing the agent. For more information on the prerequisite check, see Scanning system prerequisites for HCL Workload Automation.

The name and path of the folder on the agent containing certificates in .pem format. The installation program automatically processes the keystore and truststore files using the password you specify with the --sslpassword parameter. The folder must contain the following files:

ca.crt

The Certificate Authority (CA) public certificate.
tls.key

The private key for the instance to be installed.
tls.crt

The public part of the previous key.

You can optionally create a subfolder to contain one or more *.crt files to be added to the server truststore as trusted CA. This can be used for example to add to the list of trusted CAs the certificate of the LDAP server or DB2 server. Additionally, you can store here any intermediate CA certificate to be added to the truststore. The subfolder must be named additionalCAs. If you are connecting a master domain manager using custom certificates to a dynamic agent also using custom certificates, the only required file is ca.crt.

Before you start the installation, ensure the required files and folders are available on the agent.

This parameter is required if you set the --dbsslconnection parameter to true.

The sslkeysfolder and sslpassword parameters are mutually exclusive with the wauser, wapassword, and jwt parameters, which are used to download and deploy the certificates or JWT already available on the master domain manager.

The password for the custom certificates and the path to the folder containing certificates in .PEM format with the sslkeysfolder parameter. You can optionally encrypt the password using the secure script. For more information, see Optional password encryption - secure script.

The fully qualified host name or IP address of the dynamic workload broker the agent is registering to. It applies when you set the -agent parameter to either dynamic or both and requires the -tdwbport parameter. If not specified, you cannot run your workload dynamically and this parameter assumes the localhost default value.

If you set the -gateway parameter to remote, this is the host name of the dynamic agent hosting the gateway and to which the agent you are installing will connect. This information is stored in the JobManager.ini file. For information about installing with a local and remote gateway, see Example installation commands.

If you set the jwt parameter to true, ensure you provide a value for this parameter, so that you can download the JWT and agent ID from the specified dynamic domain manager. The dynamic domain manager routes the JWT request to the master domain manager. See also -jwt true | false.

The HTTPS transport port number of the dynamic workload broker the agent is registering to. It must match the port you specified with httpsport parameter when installing the master domain manager. It applies when you set the -agent parameter to either dynamic or both and requires the -tdwbhostname parameter. The default value is 31116. The valid range is from 0 to 65535. If you specify 0 or do not specify this parameter, you cannot run workload dynamically. Do not specify 0 if the -agent value is dynamic or both. The default is 0 for an upgrade, which means that this connection is not configured, otherwise, specify 31116 for a fresh installation.

If you set the -gateway parameter to remote, this is the HTTP or HTTPS port number of the dynamic agent hosting the gateway and to which the agent you are installing will connect. You have specified this port with the jmport parameter when installing the agent hosting the gateway. For information about installing with a local and remote gateway, see Example installation commands.

If you are performing a fresh installation, the value to use is 31114. This information is stored in the JobManager.ini file.

If you set the jwt parameter to true, ensure you provide a value for this parameter, so that you can download the JWT and agent ID from the specified dynamic domain manager. The dynamic domain manager routes the JWT request to the master domain manager. See also -jwt true | false.

The name of the HCL Workload Automation workstation of this installation. The name cannot exceed 16 characters, cannot start with a number, cannot contain spaces, and cannot be the same as the workstation name of the master domain manager. This name is registered in the localopts file. If not specified, the default value is the host name of the workstation.

If the host name starts with a number, -thiscpu parameter must be specified.

Displays command usage information and exits.

The name of the user for which the HCL Workload Automation agent is being installed. This user owns the HCL Workload Automation instance and by default, jobs are run with its name. This user name is not to be confused with the user performing the installation. The user name cannot contain periods (.).

On UNIX™ and Linux™ systems, for a new installation, this user account must be created manually before running the installation and must be enabled to login to the machine where the agent is going to be installed. Create a user with a home directory. HCL Workload Automation is installed by default under the home directory of the specified user.

Dynamic agents can be installed on UNIX™ and Linux™ systems also by installers without root privileges. When this is the case:

username takes by default the login name of the installer and uname can be omitted. If uname is specified with a different value than the login of the installer, an error message is returned.
As a consequence, the agent can run jobs uniquely with the user name of the installer.
Event Management triggers on files work only if the selected files are accessible to the user that was used for the installation.
The user must be enabled to login to the machine where the agent is going to be installed.

On Windows operating systems, you can install dynamic agents and z-centric agents using the Local System Account. To install with the Local System Account, omit the uname and password parameters.

Specifies whether HCL Workload Automation files must be encrypted at runtime. If you specify true, or do not set this parameter, files such as the Symphony file and the message queues are encrypted using AES-256 or AES-128 cryptography. By default, a fresh installation is automatically encrypted and the keystore password is default. To change the keystore password, use the encryptionpassword parameter. This parameter is optional.

One of the following users, defined on the master domain manager:

The user for which you have installed the master domain manager the agent is connecting to.
The user with the DISPLAY permission on the FILE named AGENT_CERTIFICATE. This permission allows the user to download certificates or JWT. For more information about this scenario, see Downloading certificates or JWT using a different user.

Always specify the user defined on the master domain manager, also if you are installing a dynamic agent and want it to register to a dynamic domain manager. This is because the dynamic domain manager simply forwards data to and from the master domain manager.

By providing the wauser and wapassword parameters or the apikey parameter, you enable HCL Workload Automation to download and install either the certificates in .PEM format or the JWT already available on the master domain manager. To download .PEM certificates, set the jwt parameter to false, to download JWT, set the jwt parameter to true.

This parameter is mutually exclusive with the apikey parameter.

This parameter is also mutually exclusive with the sslkeysfolder parameter, which is used to specify a folder on the agent where you store the certificates. This parameter applies to dynamic agents and fault-tolerant agents. To manage certificates for z-centric agents, use the sslkeysfolder parameter.

For more information, see -apikey and -jwt true | false,

One of the following passwords, defined on the master domain manager:

The password of the user for which you have installed the master domain manager the agent is connecting to.
The password of the user with the DISPLAY permission on the FILE named AGENT_CERTIFICATE. This permission allows the user to download certificates or JWT. For more information about this scenario, see Downloading certificates or JWT using a different user.

Always specify the user defined on the master domain manager, also if you are installing a dynamic agent and want it to register to a dynamic domain manager. This is because the dynamic domain manager simply forwards data to and from the master domain manager.

By providing the wauser and wapassword parameters or the apikey parameter, you enable HCL Workload Automation to download and install either the certificates in .PEM format or the JWT already available on the master domain manager. To download .PEM certificates, set the jwt parameter to false, to download JWT, set the jwt parameter to true.

Agent installation parameters - twsinst script

About this task