Home
IBM® Domino 10.0.1 Documentation
Welcome to the IBM® Domino 10.0.1 Administrator Help.
Administering
This documentation provides information about the administration tools for managing and monitoring IBM Domino® servers and databases.
Managing servers
Manage Domino® servers by performing any of these tasks.
Collecting diagnostic information after a server or client crash
The automatic diagnostic collection tool collects diagnostic data after server and client crashes and sends the collected data to a mail-in database when the server or client restarts. You can then use the collected data to determine the cause of the crash.
Writing status bar history to a log file
You can use the NOTES.INI setting LOGSTATUSBAR=1 to enable logging of status bar messages to the local log file, LOG.NSF. You can then use the information that is written to the log file to assist you when troubleshooting problems.

IBM® Domino 10.0.1 Documentation
Welcome to the IBM® Domino 10.0.1 Administrator Help.
- What's new in IBM® Domino® 10?
  Learn about all of the new features for administrators in IBM® Domino® 10.
- Overview
  Welcome to IBM® Domino® Administrator Help.
- Installing
  Use this documentation to install the IBM® Domino® server and subsequently deploy the IBM Notes® client.
- Planning
  Use this topic as an overview of planning task.
- Configuring
  Use this information to configure an IBM® Domino® network, users, servers (including Web servers), directory services, security, messaging, widgets and live text, and server clusters. Also use this information to set up IBM iNotes® on a server using Domino Off-Line Services (DOLS).
- Securing
  This section describes IBM® Domino® security features, including execution control lists, IDs, and SSL.
- Administering
  This documentation provides information about the administration tools for managing and monitoring IBM Domino® servers and databases.
  - Administration tools
    Topics in this section describe the tools you can use to administer a Domino® server.
  - Monitoring
    This section describes how to use the tools and features that help you monitor a Domino® system.
  - Managing servers
    Manage Domino® servers by performing any of these tasks.
    - Changing the server administrator
      If the name of the former administrator is explicitly listed in the access control list (ACL) for the Domino® Directory, delete the name of the former administrator from the ACL. Add the name of the new administrator and assign the administrator Manager access.
    - Setting and managing passwords for the server console
      Set server console passwords to protect against unauthorized use of the server console.
    - Decommissioning a Domain Search server
      If you want the server that creates full-text indexes of the Domino® domain to resume duty as a regular Domino server, remove it from the appropriate group in the Domino Directory, edit its Server document, and then delete some files from its directory structure.
    - Decommissioning a server
      You use the Decommission Server Analysis tool when you are consolidating existing servers and/or permanently removing a server from service. Whether you are combining two servers into one server or renaming a server, the result is the same -- the old server name is replaced with the new server name.
    - Deleting a server name
      You can use the Administration Process to delete references to a server from the Domino® Directory, and from database ACLs and Extended ACLs. The Administration Process automatically deletes mail-in database documents and cross-certificate documents as necessary during the Delete Server process.
    - Dropping user sessions on a server
      Dropping user sessions from a server may be useful when you need to make a database or server temporarily unavailable to correct a problem; users can reconnect after you are ready. You can drop one user session or all user sessions for the current database, or selected user sessions, from the server.
    - Finding a server name in the domain with the Domino® Administrator
      You can search for a server name in the domain and then view a log that includes document links and directory links to each occurrence of the server name.
    - Recertifying a server ID
      Use the original certifier to recertify a server ID that has a certificate that is about to expire.
    - Uninstalling a Domino® partitioned server
      You can remove all server partitions from a computer or you can remove just one server partition.
    - Reinstalling or moving a Domino® server from one computer to another
      Use this procedure to reinstall a server if an error occurs and the installer does not complete during the install of an incremental installer, or if the Domino® server is crashing and troubleshooting does not reveal the root cause.
    - Transaction logging
      Domino® transaction logging captures changes made to a database and writes them to a transaction log. The logged transactions are then written to disk in a batch, either when resources are available or when scheduled.
    - Installing and running NSD as a Microsoft™ Windows™ service
      Installing and running NSD as a Microsoft™ Windows™ service is no longer available as of IBM® Domino® 10.
    - Setting up a Fault Reports database
      The Notes/Domino Fault Reports database stores data that is collected at the time of a server crash. Data is collected from both the client and the server and can then be used to measure client reliability and determine the areas where problems exist.
    - Client and server diagnostics
      Use these tasks to perform client and server diagnostics to collect diagnostic information after a server or client crash.
    - Collecting diagnostic information after a server or client crash
      The automatic diagnostic collection tool collects diagnostic data after server and client crashes and sends the collected data to a mail-in database when the server or client restarts. You can then use the collected data to determine the cause of the crash.
      - Writing status bar history to a log file
        You can use the NOTES.INI setting LOGSTATUSBAR=1 to enable logging of status bar messages to the local log file, LOG.NSF. You can then use the information that is written to the log file to assist you when troubleshooting problems.
      - Setting up automatic diagnostic data collection on clients
        Use the desktop policy settings document to set up automatic diagnostic data collection on clients.
      - Setting up automatic diagnostic data collection on the server
        Use the Server Configuration document to set up automatic diagnostic data collection on the server. You can also enable or disable Fault Analyses from this same tab in the Server Configuration Settings document.
      - Enabling the Fault Analyzer task on the server
        You can complete this task at the same time that you set up automatic diagnostic data collection. Use the Server Configuration document to set up automatic diagnostic data collection on the server and to enable or disable Fault Analyses.
    - Using the IBM_TECHNICAL_SUPPORT directory
      The IBM_TECHNICAL_SUPPORT database contains data that has been collected using the Domino® Configuration Collector and the Automatic Diagnostic Data Collection tool. It also includes system information files and documents that have been exported from the Domino Directory and saved as .dxl documents using the Save command entered at the Domino server console.
    - The Domino® server log file (LOG.NSF)
      Every Domino® server has a log file (LOG.NSF) that reports all server activity and provides detailed information about databases and users on the server. The log file is created automatically when you start a server for the first time.
    - Controlling the size of the log file
      By default, the log file (LOG.NSF) records information about the Domino® system.
    - The Domino® Web server log (DOMLOG.NSF)
      You can log your server activity and Web server requests to the Domino® Web server log (DOMLOG.NSF) database. This option may be preferable if you want to create views and view data in different ways.
    - Using console log mirroring
      Console log mirroring causes a new server thread to be created which monitors all messages written to the Console Log file and duplicates these messages into another file. When this new file is filled, the thread closes the mirrored file and creates a new file into which subsequent messages are written. You can delete the closed mirrored files at your discretion.
    - Using the Domino® Configuration Tuner to evaluate server settings
      The Domino® Configuration Tuner (DCT) evaluates server settings according to a growing catalog of best practices. All servers in a single domain can be evaluated together. DCT generates reports that explain the issues DCT uncovers, suggests mitigations, and provides references to supporting publications.
    - Activity Logging
      You use activity logging to collect information about the activity in your enterprise. You can use this information to charge users for the amount they use your system, monitor usage, conduct resource planning, and determine if clustering would improve the efficiency of your system.
    - Managing a cluster
      After you have set up a cluster, you can perform tasks to manage it.
  - Managing databases
    Topics in this section describe how to set up and manage Domino® databases.
- Tuning
  Use this information to improve IBM® Domino® server, Domino Web server, and messaging performance through the use of resource balancing and activity trends, Server.Load commands, advanced database properties, cluster statistics, and the Server Health Monitor.
- Troubleshooting
  This section describes how to find and solve problems with IBM® Domino® server and Administrator client.
- Glossary

Writing status bar history to a log file

You can use the NOTES.INI setting LOGSTATUSBAR=1 to enable logging of status bar messages to the local log file, LOG.NSF. You can then use the information that is written to the log file to assist you when troubleshooting problems.

Procedure

To write the status bar messages to an external file, use the NOTES.INI setting

Debug_Outfile=path
to file

with the NOTES.INI setting LOGSTATUSBAR=1.

Example

LOGSTATUSBAR=1

Debug_Outfile=c:\temp\StatusBarLogging.txt

What to do next

To view the logged messages, open the file, LOG.NSF, and then click the Miscellaneous Events view. Status bar messages are appended with Status Msg.

Use the information that is written to the log file to assist you when troubleshooting problems.

For more information about the NOTES.INI variables used to enable logging of status bar messages, see the related wiki link on NOTES.INI Settings.