Configuring the process

You must configure the process that you created for the component to organize the steps in the process, specify the properties of the steps, and connect them.

Before you begin

About this task

When you open any process to configure, the process is displayed in the process editor. The process editor lists the plugins and steps. The required Start and Finish steps represent the beginning and the end of the process and are automatically placed on the design area.

You must provide the values for certain fields in the properties for the selected test step to run tests from Deploy. The minimum fields that you need to configure are Name, Workspace, Project, and Test Suite Name or Config File. The remaining fields are optional.

For example, if you provide a complete path of a configuration file that contains the parameters for a test or schedule run in the Config File field, then you need not provide values for the Workspace, Project, and Test Suite Name fields.
Note: If Test Performance is not installed in default location, then you must provide the value for the IMShared Location field along with other mandatory fields.

Procedure

  1. Log in to Deploy, if you are not already logged in.
    The Deploy dashboard is displayed.
  2. Click Components.
    A list of components that are available in Deploy is displayed.
  3. Select the component from the list in which you created the process.
  4. Click the Processes tab.
    A list of processes that are available for the component is displayed.
  5. Select the process from the list that you want to configure.
    The Design tab for the process is displayed.
  6. Click HCL DevOps Test Workbench , and then HCL DevOpsTest Performance from the left menu.
  7. Drag the Run an HCL DevOps Performance test step, and then drop it into the design area.
    Note: The selected test must be placed between Start and Finish steps.
  8. Specify the properties for the selected test by performing the following steps:
    1. Click the Edit icon.
      The Edit Properties for Run an HCL DevOps Performance test dialog is displayed.
    2. Specify the properties for the selected test step by referring to the following table:

      The following table lists the required fields that you must provide to run the test from Deploy:

      Fields Description
      Config File

      Enter the complete path to a file that contains the parameters for a test or schedule run.

      For example, C:\Users\HCL\devopstest\workspace\Project1\config.txt

      For more information about creating a command line config file from Test Performance, see the Related information section.

      Remember: If you provide a complete path of a configuration file in the Config File field, then you need not provide values for the Workspace, Project, and Test Suite Name fields.
      Name

      Enter the name for the test step.

      For example, testrun1
      Project

      Enter the name of the project that has performance test assets.

      For example, testproj1
      Test Suite Name

      Enter the file name of the performance test assets relative to the project.

      For example, test1.testsuite
      Workspace

      Enter the complete path of the Eclipse workspace.

      For example, C:\Users\HCL\devopstest\workspace1

      The following table lists the optional fields that you can provide to run the test from Deploy:

      Fields Description
      Custom Report Format Files

      Use this field to specify IDs of reports that you want to export in place of the default reports.

      You can provide multiple report IDs separated by a comma. You can navigate to Preferences of Test Performance (Window > Preferences > Test > Performance Test Reports > Export Reports), and then select Show Report IDs checkbox to view the report IDs.

      You must use the Custom Report Format Files field along with the Exported Statistical Report Data File or Exportstatshtml field.

      For example, you can provide http as a value in the Custom Report Format Files field to export a Performance Report.
      Dataset Override

      Use this field to replace the dataset values during a test or schedule run.

      You must ensure that both original and new datasets are in the same workspace and have the same column names. When you enter a value for the Dataset Override field, you must also include the path to the dataset. You must provide the values for the Dataset Override field in the following format:

      /project_name/ds_path/original_ds.csv:/project_name/ds_path/new_ds.csv

      For example, /proj1/Datasets/ds1.csv:/proj1023/Datasets/new_ds1.csv

      You can override multiple datasets that are saved in a different project by adding multiple paths to the dataset separated by a semicolon. For a test or schedule, the default value is the dataset specified in the test editor or schedule editor.
      Duration

      Use this field to change the duration of the stages in the rate schedule.

      For example, Stage1=10s, Stage2=3m

      The stage number specified must exist in the rate schedule.

      Note: The Duration field creates a new copy of the rate schedule that contains the specified number of duration.
      Exported HTTP Test log file

      Use this field to specify the path of the file directory to store the exported HTTP test log in a .txt format.

      For example, C:/Users/Documents/tests/logexp.txt
      Exported Statistical Report Data File

      Use this field to provide the complete path to a directory that you can use to store exported reports in a comma-separated values (CSV) format.

      For example, C:/Users/Documents/tests

      Note: If you do not specify a value for the Custom Report Format Files field, then the reports that you selected in Preferences of Test Performance (Window > Preferences > Test > Performance Test Reports > Export Reports) are exported.
      Exportstatsformat

      Use this field to specify a format for the report that you want to export.

      You must use at least one of the following options along with the Exported Statistical Report Data File field:

      • simple.csv

      • full.csv

      • simple.json

      • full.json

      • csv

      • json

      For example, json.

      You can add multiple formats for the report separated by a comma. When you want to export both simple and full type of report in a json or csv format, you can specify json or csv as the format in the field.

      The reports are saved to the location specified in the Exported Statistical Report Data File field.

      Note: The values provided in the Exportstatsformat field always take precedence over the Export Reports options set in the Preferences of Test Performance (Window > Preferences > Test > Performance Test Reports > Export Reports).
      Exportstatshtml

      Use this field to provide the complete path to a directory that you can use to export web analytic results.

      The results are exported to the specified directory. You can analyze the results on a web browser without using Test Performance.

      For example, C:/Users/Documents/Reports
      History

      Use this field when you want to view a record of all events that occurred during a test or schedule run.

      You can use any of the following options:
      • jaeger: To send test logs to the Jaeger UI during the test or schedule run.
        Note: You must set the JAEGER_AGENT_HOST property as an environment variable by using the command line before you use the jaeger option to send test logs to the Jaeger UI.

      • testlog: To send test logs as traditional test logs in Test Performance during the test or schedule run.

      • null: To send no test logs either to the Jaeger UI or Test Performance during the test or schedule run.

      For example, jaeger

      You can add multiple options separated by a comma to send test logs during the test or schedule run to Test Performance and the Jaeger UI.

      For example, jaeger,testlog

      For more information about how to view test logs in the Jaeger UI and Test Performance, see the Related information section.
      IMShared Location

      Enter the complete path to the IMShared directory, if it is not in the default location.

      For example, D:\Testtool\HCL\HCLIMShared

      The default location of the IMShared directory is as follows:
      Operating system The default path to the directory
      Windows® C:\Program Files\HCL\HCLIMShared
      Linux™ /opt/HCL/HCLIMShared
      Mac /Application/HCL/HCLIMShared
      Labels

      Use this field to add labels to test results when the test run is complete.

      For example, label1, label2

      You can add multiple labels to a test result separated by a comma. When you run test assets, then the labels that you added are displayed on the Performance Report in Test Performance.

      The Results page of Test Hub displays the label that you added in the Labels field for the specific test asset in the following conditions:

      • When you set Publish result after execution as Always or Prompt in the Preferences of Test Performance (Windows > Preferences > Test > DevOps Test Hub).

      • When you use the Labels field along with the Publish field.

      Note: When you run tests by using the double quotation marks ("") for the Labels field, then the labels in the test result do not include double quotation marks.

      For example, if you provide the value for the Labels field as "100" users, then the labels display 100 users in the test result.

      To work around this problem, you must create a command-line config file, and then run the test by using the Config File field.
      Number of Virtual Users

      Use this field to override the default number of virtual users in the test or schedule run.

      For a schedule, the default is the number of users specified in the schedule editor and for a test, the default is one user.

      Note: The Number of Virtual Users field creates a new copy of the schedule that contains the specified number of users.
      Overwrite Results file

      Select or clear this field to determine whether a result file with the same name must be overwritten or not.

      The default status of the field is selected. Therefore, the file is overwritten and retains the same file name.
      Publish

      Use this field to publish test results to Test Hub from Deploy.

      Remember: Before you use the Publish field, you must provide the offline user token of Test Hub by using any of the following methods:

      • Set the value of the OFFLINE_TOKEN environment variable to the offline user token of Test Hub by using the command-line interface.

      • Provide the offline user token of Test Hub in the preferences of Test Performance (Window > Preferences > Test > DevOps Test Hub)

      You must use one of the following values in the Publish field:

      • serverURL#project.name=name_of_the_project&teamspace.name=name_of_the _teamspace

      • serverURL#project.name=name_of_the_project&teamspace.alias=name_of_the _teamspace_alias

      • no

        The no option is useful if the product preferences are set to publish the results, but you do not want to publish them.

      For example, URL_OF_Test Hub#project.name=test&teamspace.name=ts1

      Where:

      • URL_OF_Test Hub is the URL of Test Hub.

      • test is the name of the project in Test Hub.

      • ts1 is the name of the team space.

      Notes:

      • If you have a project with the same name in different team spaces, then you must append either the &teamspace.name=name_of_the _teamspace or &teamspace.alias=name_of_the_teamspace_alias options.

      • If the name of the project or team space contains a special character, then you must replace it with %<Hexvalue_of_special_character>.

        For example, if the name of the team space is Initial Team Space, then you must provide it as Intial%20Team%20Space.

        Where %20 is the Hex value of Space character.

      • The values provided in the Publish field always take precedence over the Results options set in the product preferences (Window > Preferences > Test > DevOps Test Hub > Results).

      The Reports information section on the Log file displays the names of the report along with its corresponding URLs in the following conditions:
      • When you configured the URL of Test Hub in Preferences of Test Performance (Window > Preferences > Test > DevOps Test Hub).
      • When you set Publish result after execution as Always or Prompt in the Preferences of Test Performance (Window > Preferences > Test > DevOps Test Hub > Results).
      • When you used the Publish field or the Publish field along with the Publishreports field.
      Publish_for

      Use this field to publish test results to Test Hub from Deploy based on the completion status of the tests.

      You must use the Publish_for field along with the Publish field. You can add multiple options separated by a comma. The following are the available options that you can use for the Publish_for field:

      • ALL: You can use this option irrespective of status of the test.

      • PASS: You can use this option to publish test results for the tests that have passed.

      • FAIL: You can use this option to publish test results for the tests that have failed.

      • ERROR: You can use this option to publish test results for the tests that included errors.

      • INCONCLUSIVE: You can use this option to publish test results for the inconclusive tests.

      For example, FAIL,ERROR
      Publishreports

      Use this field to publish specific test results to Test Hub.

      The options that you can use with Publishreports are as follows:

      • STATS

      • TESTLOG

      For example, STATS

      You must use the Publishreports field along with the Publish field. You can prefix the value of Publishreports with ! to publish the reports except the specified one.

      For example, !STATS
      Rate

      Use this field to change the rate of the rate runner group.

      For example, Rate Runner Group1=1/s, 3/m

      Where, Rate Runner Group1 is the name of the Rate Runner group that has two stages. The desired rate for the first stage is one iteration per second and the rate for the second stage is three iterations per minute.
      Notes:
      • The name of the Rate Runner group must match with the name in the rate schedule.
      • The Rate field creates a new copy of the rate schedule that contains the specified number of rate.
      Resource Monitoring Labels Override
      Use this field to perform any of the following actions:

      • Enable the Resource Monitoring from Service option for a performance schedule if the Resource Monitoring from Service option is not enabled from the schedule editor in Test Performance.

      • Ignore Resource Monitoring sources that were set in the performance schedule and change for a label matching mode.

      • Replace an existing set of Resource Monitoring labels that were set in the performance schedule and run the schedule with a new set of Resource Monitoring labels.

      If you have added a label in Test Hub for a Resource Monitoring source as rm1, then you can provide value as shown in the following example to collect data from the source:

      rm1

      If your label for resource monitoring contains a comma (,) then you must replace the single comma with the double comma while providing the value. For example, if you added a label to a Resource Monitoring source as rm1,test, then you must provide the value as shown in the following example to collect data from source:

      rm1,,test

      Notes:

      • You can use this field only when you want to run a Rate schedule or VU schedule.

      • You can add multiple Resource Monitoring labels separated by a comma.

      • You must add the Resource Monitoring labels to the Resource Monitoring sources on the Resource Monitoring page in the Test Hub project.
      Results File

      Use this field to provide a different name to the result file.

      The results file is stored in the Results directory. The default name of the result file is the name of the test or schedule with a timestamp appended.
      User Comments

      Use this field to add text that you want to display in the user comments row of the report.

      For example, test run with dataset

      Note: When you run tests by using the double quotation marks ("") for the User Comments field, then the user comments row of a report does not contain double quotation marks.

      For example, if you provide the value for the User Comments field as test run with "dataset", then the user comments row of a report displays the value as test run with dataset.

      To work around this problem, you must create a command-line config file, and then run the test by using the Config File field.
      Var File

      Use this field to provide a complete path to an XML file that contains the variable name and value pairs.
      VM Args

      Use this field to specify the maximum heap size for the Java process.

      You can add multiple VM Arguments separated by a comma.
      Note: The following fields are from Deploy:
      • Working Directory
      • Precondition
      • Post Processing Script
      • Use Impersonation
      • Auth Token Restriction
      You can accept the default values or change the values based on your requirements. For more information about these fields, see the related links.
    3. Click OK to save the properties for the test.
  9. Click Save in the design area.

Results

You have configured the process for the component in Deploy.

What to do next

You must create a resource in Deploy. See Creating a resource in HCL DevOps Deploy.