Enable Capture
About this task
Note: The following steps enable the DNCA to begin capturing
network traffic that is provided through the specified NIC and forwarding
the captured data to the selected Processing Server. If the Processing
Server is not yet configured to capture and process the forwarded
data, then data is lost when the DNCA is unable to establish a connection.
However, you can use these steps and the subsequent ones to verify
DNCA operations.
When capture is enabled, the Processing Server must also be capturing in order for the hits to be captured.
Procedure
- Click the DNCA web Console - Console Tab.
- Click Start.
Results
The DNCA begins capturing and forwarding to the specified Processing Server.