EQQT002 - EQQT307
EQQT002E
END DATE FOR PRINTOUT MUST BE SPECIFIED
Data entry error.
You did not specify a required value. Specify a correct value and proceed with the operation. See Data entry errors
EQQT003W
ENTER END AGAIN TO LEAVE OR PRESS ENTER TO PRINT
Reenter END to leave without initiating a printout or press ENTER to initiate the printout.
The system waits for you to respond.
Reenter END or press ENTER.
EQQT005E
THE CALENDAR FILE IS SIMULTANEOUSLY BEING UPDATED BY ANOTHER USER
The calendar that you specified cannot be added because a calendar is simultaneously being added by another user.
The system waits for you to respond.
Try again later.
EQQT011E
THE CALENDAR NAME T01101 DOES NOT EXIST
The requested calendar was not found in the calendar database. Either you entered the wrong name or the requested calendar has not yet been created.
None.
Enter the correct calendar name or create the requested calendar.
EQQT012E
A CALENDAR NAME MUST BE SPECIFIED
You did not specify a calendar name.
None.
Enter the name of the calendar that you need.
EQQT013E
INVALID PARAMETER INPUT TO MODULE MOD
A programming error has occurred in module MOD.
The system waits for you to respond.
Ensure that the IBM-supplied panel is being used.
Contact the system programmer to ensure that the IBM-supplied panel is used.
EQQT014E
CALENDAR CALENDAR IS BEING UPDATED BY USER USR TRY LATER
You cannot update the calendar because another user is already updating it.
The system waits for you to respond.
Try again later.
EQQT015I
A CALENDAR HAS BEEN DELETED
A calendar has been deleted and the database has been updated.
None.
None.
EQQT016E
CALENDAR ID IS NOT SPECIFIED
A calendar ID must be given.
None.
Enter the calendar ID that you need.
EQQT017I
A CALENDAR HAS BEEN UPDATED
A calendar has been updated and the database has been updated.
None.
None.
EQQT018E
CALENDAR CALENDAR NOT CREATED - MAXIMUM NUMBER EXCEEDED
The maximum number of calendars, 32768, has been exceeded.
The system waits for you to respond.
Delete a calendar to allow a new one to be added.
EQQT019E
DUPLICATE SPECIFIC DATES / WEEKDAYS EXIST IN TABLE
Data entry error.
Remove the duplication and proceed with the operation. See Data entry errors
EQQT020I
A CALENDAR HAS BEEN ADDED
A calendar has been added and the database has been updated.
None.
None.
EQQT021E
CALENDAR ID IS MISSING OR INVALID
Data entry error.
A calendar ID can be made up of the following characters: A through Z, 0 through 9, and national characters (that is, #, $, and @). The first character must be alphabetic.
You did not specify a required value. Specify a correct value and proceed with the operation. See Data entry errors
EQQT022E
ENTERED CALENDAR ID ALREADY EXISTS
The calendar ID that you specified already exists in the database.
The system waits for you to respond.
Reselect the calendar ID using MODIFY, or specify another calendar ID if using COPY or CREATE.
EQQT023E
SPECIFY WEEK DAY OR SPECIFIC DATE IN USER DEFINED FORMAT
Data entry error.
Specify a correct value and proceed with the operation. See Data entry errors
EQQT024E
UNABLE TO READ CALENDAR DESCRIPTION RECORD
The calendar description record could not be read because either it may have been deleted by another user or an error in the calendar description database made it impossible to read the record.
The system waits for you to respond.
To collect appropriate documentation for problem determination, see the Diagnosis Guide and Reference manual, "Chapter 3. Problem analysis procedures", "Section: Information needed for all problems". Search the IBM Support database for a solution at http://www.ibm.com/software/sysmgmt/products/support.
Go back to the previous panel and retry. If the error persists, contact your system programmer.
EQQT025E
WORK DAY END TIME MUST BE SPECIFIED
Data entry error.
You did not specify a required value. Specify a correct value and proceed with the operation. See Data entry errors
EQQT026E
SPECIFY A VALID DAY OR DATE IN USER DEFINED FORMAT
A valid week day or specific date must be given in the user specified format.
Specify a day or date in the correct format and proceed with the operation. See Data entry errors
EQQT030E
END DATE MUST BE LESS THAN FOUR YEARS FROM CURRENT DATE
You specified a time span, from current date to end date, that exceeded four years.
The system waits for you to respond.
Specify an end date less than four years from the current date.
EQQT031E
THE END DATE IS PRIOR TO CURRENT DATE
You specified an end date that is prior to the current date.
The system waits for you to respond.
Specify an end date that is after the current date.
EQQT100E
PARAMETER MUST BE A PERIOD NAME
Data entry error.
Specify a value in the correct format and proceed with the operation. See Data entry errors
EQQT101W
PERIOD PERIOD IS BEING UPDATED BY USER USR TRY LATER
You cannot access the period PERIOD because it is being updated by another user.
The system waits for you to respond.
Try again later.
EQQT102I
A CALENDAR PERIOD HAS BEEN CREATED
A calendar period has been created and the database has been updated.
None.
None.
EQQT103I
A CALENDAR PERIOD HAS BEEN DELETED
A calendar period has been deleted from the calendar database.
None.
None.
EQQT106I
A CALENDAR PERIOD HAS BEEN UPDATED
A calendar period has been updated in the calendar database.
None.
None.
EQQT108E
PERIOD PERIOD NOT CREATED - ALREADY EXISTS
The calendar period PERIOD that you specified could not be created because it already exists in the calendar database.
The system waits for you to respond.
Enter a unique period name. If you want to create versions of an already existing period, use the COPY function.
EQQT110E
LIST OF ORIGIN DATES CONTAINS DUPLICATES
Data entry error.
Remove the duplicate value and proceed with the operation. See Data entry errors
EQQT111E
ONLY ONE ORIGIN DATE CAN BE SPECIFIED IN CYCLIC PERIODS
Data entry error; see Data entry errors.
EQQT112E
ORIGIN DATE MUST BE SPECIFIED
You have not specified an origin date.
The request is rejected.
Specify the required origin date and proceed with the operation.
EQQT113E
INTERVAL INCONSISTENT WITH TYPE OF PERIOD
Data entry error.
Specify a correct value and proceed with the operation. See Data entry errors
EQQT114E
CYCLIC TYPE MUST BE ANY OF THE LISTED VALUES
Data entry error; see Data entry errors.
EQQT115E
PERIOD NAME IS MISSING OR INVALID
Data entry error; see Data entry errors.
EQQT116E
THE VARIABLE TABLE NAME CONTAINS AN INVALID CHARACTER
Data entry error; see Data entry errors.
EQQT117E
THE VARIABLE TABLE IS NOT DEFINED
Data entry error.
You have tried to define a variable table ID that does not exist in HCL Workload Automation for Z database.
Define the variable table in the correct format and proceed with the operation. See Data entry errors
EQQT118E
YOU ARE NOT AUTHORIZED TO READ THE JCL VARIABLE TABLE DATA BASE
You have attempted to refer to a JCL variable table. To do this, you need read authority to the JCL variable table database.
The system waits for you to respond.
If you need to refer to JCL variable table names, contact your security administrator.
EQQT121E
NON-CYCLIC PERIOD INTERVALS MUST NOT OVERLAP
You have entered a period interval origin or an end date within an already existing interval.
The request is rejected.
Change the interval origin or end date so that it falls outside other intervals. .ALARM=YES
EQQT122E
NON-CYCLIC PERIOD INTERVAL END DATE MUST NOT PRECEDE ORIGIN DATE
The interval end date is prior to the associated origin date.
The request is rejected.
Change the interval end date or the interval origin date, so that the interval end date is later than the interval origin date.
EQQT123E
INTERVAL END DATE MAY NOT BE SPECIFIED FOR CYCLIC PERIODS
You have entered an interval end date for a cyclic period. This is allowed only for noncyclic periods.
The request is rejected.
Erase the specified interval end date specified or change the period type to noncyclic.
EQQT305E
DAY STATUS MUST BE SPECIFIED AS OCHWORK OR OCHFREE
Data entry error.
OCHWORK is the national language character for 'W' (work day) and OCHFREE is for 'F' (free day).
Define a value in the correct format and proceed with the operation. See Data entry errors
EQQT307E
CALENDAR MUST CONTAIN AT LEAST ONE WORK DAY, CHECK CALID
A calendar must contain at least one work day, but the calendar you are trying to create has none.
No calendar is created. HCL Workload Automation for Z processing continues.
Make sure that the calendar definition specifies at least one work day and recreate the calendar.