EQQS000 - EQQS417
EQQS000E
YOU DO NOT HAVE AUTHORITY TO ACCESS THE QUERY CP DIALOG
You have attempted to access the Query Current Plan dialog, but you are not authorized.
The request is rejected and the system waits for you to respond.
If you need access to the Query Current Plan dialog, contact your security administrator.
EQQS001E
AN INVALID MODULE PARAMETER WAS DETECTED
There is an invalid parameter in the input to a query current plan module.
The requested access to the query current plan function is rejected.
Check that the panel has not been inadvertently overlaid in the panel library (ISPPLIB). Verify that the user is not running a customized panel version.
Check that your TSO logon profile points to the proper panel product library (ISPPLIB).
This message indicates that there is an error in the current panel.
EQQS003I
THE TRACKER HAS NOT PROVIDED ANY SYSTEM INFORMATION
System information is not available for the destination defined for this workstation. Tracker system information is available only when the controller has performed the initial synchronization and handshaking with the tracker.
None.
This message is an indication that handshaking is not completed between the controller and the tracker. If the destination is Active, that is, there is not a communication failure, the event writer subtask at the indicated destination is not active. If this message is not expected, take appropriate actions to correct the problem with the tracker.
The handshaking process may be in progress. Retry the request when the workstation is in Active status. The message can also indicate an error in the HCL Workload Automation for Z configuration.
EQQS004E
PROBLEMS ENCOUNTERED ATTEMPTING TO LOCATE SYSTEM INFORMATION
The controller encountered an error when processing the request for system information. This message is always an indication of an internal error in HCL Workload Automation for Z.
Normal processing continues.
This message indicates that there is an error either in the processing of the ROUTOPTS initialization statement or in the current plan (CP) data set. If HCL Workload Automation for Z is operating normally, no action needs be taken immediately. Review the involved workstation definition (either in WS and CP repository) and the destination defined for it. If you are unable to determine the cause of the problem, take a copy of the active CP data set, the active job-tracking log, the job-tracking archive, the controller message log, and the WS data set. If the problem persists, search the IBM Support database for a solution at http://www.ibm.com/software/sysmgmt/products/support.
Take note of the workstation name, the approximate time when this message was issued in your dialog, and the action you were performing.
EQQS005E
SYSTEM INFORMATION IS ONLY POSSIBLE FOR COMPUTER WORK STATIONS
System information is passed to the controller by the tracker executing on a system destination as specified in the workstation description. System information is only available for computer workstations.
The request is rejected.
Choose a computer workstation that represents the system for which you need information.
EQQS006E
OPEN INTERVALS NOT AVAILABLE FOR VIRTUAL WORKSTATIONS.
The selected workstation has the VIRTUAL option set to Y. Open intervals do not apply to virtual workstations: they apply to the single destination associated to a virtual workstation.
The request is rejected.
Use the Summary information (S) command to get the virtual workstation panel flow.
EQQS007E
D COMMAND IS ALLOWED ONLY FOR VIRTUAL WORKSTATIONS.
The selected workstation has the VIRTUAL option set to N. The D command is only meaningful for virtual workstations.
The request is rejected.
Use the Open intervals (O) or System Information (S) command from the BROWSING WORKSTATION ACTIVITY panel.
EQQS008E
YOU DO NOT HAVE AUTHORITY TO ISSUE ALL DEPS QUERY
It is required that the person who issues the ALL DEPS command has the proper RACF authorization.
The request is rejected.
Enhance the RACF authorization of the user or ensure that the ALL DEPS command be issued by another user having the correct authorization.
EQQS100E
THE ONLY VALID VALUES ARE OCHCYES AND OCHCNO
You entered an invalid value in the AVAIL column.
The system waits for you to respond.
Enter a correct value in the AVAIL column.
EQQS101E
YOU ARE NOT AUTHORIZED TO MODIFY SPECIAL RESOURCES
To display a HCL Workload Automation for Z panel where special resources can be modified, you need update authority to special resources. You do not have this authority.
The request is rejected.
Contact your security administrator.
EQQS102E
SPECIAL RESOURCES ARE BEING UPDATED. TRY LATER
Another HCL Workload Automation for Z dialog user is currently updating special resources. To avoid overlaying another user’s changes, only one dialog user can actively modify special resources.
Processing continues.
Try again later.
EQQS103E
LEAVE BLANK OR SPECIFY ONE OF OSROEF, OSROEFS, OSROEFX, OR OSROEK
You entered an invalid action code in the On error field for a special resource.
The system waits for you to respond.
Enter a valid value or leave the field blank.
EQQS104E
YOU ARE NOT AUTHORIZED TO BROWSE SPECIAL RESOURCES
To display a HCL Workload Automation for Z panel where special resources can be shown, you need read authority to special resources. You do not have this authority.
The request is rejected.
Contact your security administrator.
EQQS105E
EACH SPECIAL RESOURCE MUST NOT BE DEFINED BY MORE THAN ONE ROW
You have modified the table containing special resources so that there is more than one row defining a special resource. This is not allowed.
The system waits for you to respond.
Delete all duplicate resource definition rows for the special resource.
EQQS106E
ERRORS DETECTED WHEN TRYING TO UPDATE SPECIAL RESOURCES
An error occurred while updating special resource information in the subsystem.
The updated special resource is not stored.
Review the Special Resource definitions and any related error message in the MLOG and System Log. If you are unable to determine the cause of the problem. Take a copy of the active CP data set, the active job-tracking log, the job-tracking archive. If the problem persists, search the IBM Support database for a solution at http://www.ibm.com/software/sysmgmt/products/support.
Review the log data set for error messages issued at the time of the request. If you cannot determine the cause of the problem and the error persists, take note of the special Resource name and of the action you were performing and contact your system programmer.
EQQS107E
DLF INDICATOR CANNOT BE UPDATED WHILE RESOURCE IS ALLOCATED
The update cannot be performed until all operations currently allocating the resource have completed.
The update request is rejected.
Retry the update request later.
EQQS300E
PRIORITY MUST BE A NUMBER FROM 1 - 9
Data entry error; see Data entry errors.
Review your input in the Priority field of the panel. Select a number in the range 1-9.
EQQS301E
THE MCP ADDED INDICATOR MUST BE OCHCYES OR OCHCNO
Data entry error; see Data entry errors.
OCHCYES is the national language character for 'Y' (yes) and OCHCNO is the national language character for 'N' (no).
Review your input in the Occurrence Added field of the panel. Enter Yes, No, or leave it blank.
EQQS302E
THE RERUN INDICATOR MUST BE OCHCYES OR OCHCNO
Data entry error; see Data entry errors.
OCHCYES is the national language character for 'Y' (yes) and OCHCNO is the national language character for 'N' (no).
Review your input in the Rerun field of the panel. Enter Yes, No, or leave it blank.
EQQS303E
AN INVALID STATUS CODE STT WAS FOUND IN THE CODE STRING
One or more of the status codes (STT) that you specified is not valid.
The system waits for you to respond.
Enter valid status codes.
The convention on status codes for the installation is defined in the ISPPLIB library panel EQQXINIX.
EQQS304E
MOST CRITICAL OCCURRENCE LIST, DO NOT SELECT ON STATUS STT
The most critical occurrence list contains all occurrences that were not completed or deleted. It is not possible to further restrict the list base on the occurrence status.
The system waits for you to respond.
Remove the status code. If you want selection on status, go back to the Current Plan and Status Inquiry panel and select 1, APPLICATIONS.
EQQS305E
CODE MUST BE ONE OF ST1E , ST1D , ST1P OR ST1A
You entered an invalid code for selecting occurrences from the current plan in the Query Current Plan dialog.
The system waits for you to respond.
Enter the correct code.
EQQS306E
SELECTION TYPE MUST BE SPECIFIED
Data entry error; see Data entry errors.
Review your input in the Type of Selection field of the panel. Type of Selection is a required field and you cannot leave it blank. You can specify one of the following values: AP, NP, AS, or NS.
EQQS307E
SELECTION TYPE MUST BE OCHALLP, OCHNONP, OCHALLS, OR OCHNONS
Data entry error; see Data entry errors.
Review your input in the Type of Selection field of the panel. You can specify one of the following values: AP, NP, AS, or NS.
EQQS308E
NESTING LEVEL MUST BE SPECIFIED
Data entry error; see Data entry errors.
Review your input in the Nesting Level field of the panel. Nesting Level field is a required field and you cannot leave it blank. You can specify a value in the range 1-999.
EQQS309E
NESTING LEVEL MUST BE 1-999
Data entry error; see Data entry errors.
Review your input in the Nesting Level field of the panel. You can specify a value in the range 1-999.
EQQS400I
NO ENTRIES WERE SELECTED FOR THE LIST
A request for a list of records resulted in an empty list. Either there were no records that matched the selection criteria or you were not authorized to access those that were found.
None.
None.
EQQS401I
NO OPEN INTERVAL SPECIFIED IN THE WORK STATION DEFINITION
The workstation description in the current plan has no open interval.
None.
None.
EQQS402E
UNABLE TO RETRIEVE &CPREC DATA, NO RECORDS FOUND
- Operation: when an attempt to read an operation record (CP3P) from the current plan failed.
- Occurrence: when an attempt to read an occurrence record (CP3C) from current plan failed.
- AD: when an attempt to read an application record (ADR) from the application description database failed.
The system waits for you to respond.
Refresh the screen to reflect the current status of the plan or database. For ready lists and the ended-in-error list, this is automatically done at any dialog request or when you press Enter. For other operation lists, it is necessary to exit from the list and redisplay the list unless you are using the advanced panels. When using the advanced panels, the refresh of operation lists happens automatically at any dialog request or when you press Enter.
EQQS403E
NESTING DETAIL MUST BE SPECIFIED
Data entry error.
EQQS404E
NESTING DETAIL MUST BE OCHALL OR OCHNONE
Data entry error.
EQQS405E
SELECTION NOT VALID
System automation information is not available for a workstation that is not-Automation.
You selected System Automation Info, but the workstation is not defined as a System Automation WS. Review your workstation selection, and select a System Automation workstation.
EQQS406E
INVALID TEMPLATE NAME
The template for this panel has not been found.
The template cannot be used.
Check if the template is present in EQQTMPL.
EQQS407E
ERROR USING TEMPLATE CTPLNAME. DEFAULT TEMPLATE USED.
The template used is not available. The default template will be used.
The default template is selected.
Check if the template is present in EQQTMPL. Correct the error.
EQQS408E
ERROR LOADING DEFAULT TEMPLATE
Error using default panel template which cannot be loaded.
The default template cannot be used.
Check if the template is present in EQQTMPL.
EQQS409E
ERROR USING BOTH TEMPLATE CTPLNAME AND DEFAULT TEMPLATE.
The template used and the default template are not available.
None.
Check if the template and default template are present in EQQTMPL. Correct the error.
EQQS417I
REQUEST IGNORED. THE HIST COMMAND HAS NOT BEEN CONFIRMED.
You submitted a HIST command to retrieve data from the HCL Workload Automation for Z history database, but you answered N in the confirmation panel.
The command request is not processed.
You submitted the HIST command, but you did not select Yes to continue on the confirmation panel. The command is ignored.