EQQRM01 - EQQRM29
EQQRM01I
RODM SUBTASK INITIALIZATION IS COMPLETE
The RODM subtask has completed initialization processing.
Processing continues.
None.
EQQRM02E
RODM SUBTASK ABENDED WHEN PROCESSING THE FOLLOWING QUEUE ELEMENT DQE
An abend prevented the RODM subtask from processing a queue element.
z/OS recovery/termination is requested to generate a dump. The RODM subtask restarts, and resumes normal processing.
Save the EQQMLOG, EQQDUMP, and system dump data sets and contact the Software Support.
Review the HCL Workload Automation for Z message log data set (EQQMLOG), the diagnostic data set (EQQDUMP), and the system dump data set to determine the cause of the error.
EQQRM03W
RODM CONNECT FAILED FOR RODM SUBSYSTEM NAME. RC IS RC, RSN IS RSN
A nonzero return code was returned by the RODM subsystem NAME when the RODM subtask called the RODM API to connect.
The RODM subtask attempts to connect to this RODM subsystem repeatedly until the connection succeeds or the RODM subtask is stopped.
Make sure that the RODMSYS keyword is specified correctly, and if so, that the specified RODM subsystem has started successfully. Refer to the RODM Programming Guide for more information about return codes and reason codes used by the RODM API.
EQQRM04W
RODM CONNECT FAILED DUE TO RODM ERROR FOR SYSTEM
The RODM subtask has not been able to connect to the specified RODM subsystem.
The OPCRESOURCE/OPCFIELD specified on the RODMOPTS statement referring to this RODM subsystem is set to Inactive and processing continues. Attempts to connect to this RODM subsystem are initiated every five minutes.
Make sure that the RODM subsystem is properly initialized.
EQQRM05I
INITIALIZATION FAILED - SUBSYSTEM STOP REQUESTED
A stop subsystem command was issued while the RODM subtask was initializing. This caused the subtask to end.
The HCL Workload Automation for Z subsystem continues the shutdown sequence.
None.
EQQRM07W
THE RODM SUBTASK IGNORED THE FOLLOWING ELEMENT ON THE RODM QUEUE DQE
An invalid subscription request was found on the RODM queue.
Processing continues.
Contact the Software Support.
EQQRM09E
RODM SUBTASK QUEUE POINTERS ARE DESTROYED, RODQ IS LOST
The RODM subtask abended while processing elements on APPQ because the queue chaining is invalid.
z/OS recovery/termination is requested to generate a dump. The RODM subtask restarts and resumes normal processing.
Save the EQQMLOG, EQQDUMP, and system dump data sets and contact the Software Support.
Review the HCL Workload Automation for Z message log data set (EQQMLOG), the diagnostic data set (EQQDUMP), and the system dump data set to determine the cause of the error.
EQQRM10E
INVALID RODMRM2XE VALUE VALUE SPECIFIED FOR RESOURCE NAME
A RODMOPTS statement specifies a RODMRM2XE value that is invalid.
RODM subtask initialization fails and the controller is shutdown.
Specify a valid RODMRM2XE value and restart the controller.
EQQRM11E
RODM INTERFACE MODULE EKGUAPI COULD NOT BE LOADED
A RODM interface module was not found in the library search path.
HCL Workload Automation for Z continues, but the RODM functions as requested by RODMOPTS keywords referring to this destination are disabled.
Make sure that the RODM interface modules can be accessed, either via the LINKLST or in the STEPLIB concatenation, and restart HCL Workload Automation for Z
EQQRM12W
RESOURCE UNKNOWN NAME
A RODMOPTS statement specifies a resource unknown to HCL Workload Automation for Z.
This RODMOPTS statement is ignored. Processing continues. The status is set to Inactive.
Specify a valid resource name or add the resource to HCL Workload Automation for Z.
EQQRM13E
RESOURCE FIELD UNKNOWN NAME
A RODMOPTS statement specifies a resource field unknown to HCL Workload Automation for Z.
RODM subtask initialization fails and the controller is shut down.
Specify a valid resource field name and restart the controller.
EQQRM14W
RODM OBJECT UNKNOWN NAME
A RODMOPTS statement specifies a RODM object that is unknown to HCL Workload Automation for Z.
The OPCRESOURCE/OPCFIELD specified on the RODMOPTS statement referring to this RODM OBJECT is set to Inactive and processing continues. New subscription attempts are performed every five minutes.
Specify a valid object name or add the object to the RODM subsystem.
EQQRM15W
RODM OBJECT FIELD UNKNOWN NAME
A RODMOPTS statement specifies a RODM field that is unknown to HCL Workload Automation for Z.
The OPCRESOURCE/OPCFIELD specified on the RODMOPTS statement referring to this RODM FIELD is set to Inactive and processing continues.
Specify a valid RODM field name or add the field to the object in the RODM subsystem.
EQQRM16I
CONNECTION ESTABLISHED TO RODM SUBSYSTEM: NAME
HCL Workload Automation for Z has connected to a RODM subsystem.
Processing continues.
None.
EQQRM17W
CONNECTION LOST TO RODM SUBSYSTEM: NAME
HCL Workload Automation for Z has lost the connection to a RODM subsystem.
Processing continues. The status for all resources being monitored by the named RODM subsystem is set to Inactive and the values of the corresponding HCL Workload Automation for Z resource fields are set according to the RODMLOST values in the RODMOPTS statements. Attempts to reconnect to this RODM subsystem are initiated every five minutes.
None.
EQQRM18E
INVALID TRANSLATION VALUE TYPE VALUE SPECIFIED FOR RESOURCE NAME
A RODMOPTS statement specifies an invalid TRANSLATE value.
RODM subtask initialization fails and the controller is shut down.
Specify a valid value in the TRANSLATE ordered list and restart the controller.
EQQRM19E
INVALID RODMLOST VALUE VALUE SPECIFIED FOR RESOURCE NAME
A RODMOPTS statement specifies an invalid RODMLOST value.
RODM subtask initialization fails and the controller is shut down.
Specify a valid value in the RODMLOST keyword and restart the controller.
EQQRM20E
DESTINATION UNKNOWN DNAME
A RODMOPTS statement specifies a destination that is unknown to HCL Workload Automation for Z.
RODM subtask initialization fails and the controller is shut down.
Specify a valid destination name and restart the controller.
EQQRM21W
THE AVAILABILITY OF A SPECIAL RESOURCE COULD NOT BE DETERMINED FROM A RODM OBJECT. RESOURCE NAME IS NAME
A RODMOPTS statement specifies that the availability of a special resource should be updated by a field in a RODM object. HCL Workload Automation for Z cannot determine whether the special resource is available or not because the value of the field is not Y, N, or a value that can be translated to Y or N.
The availability of the special resource is not changed. The RODM subtask continues normal processing.
Verify that the RODM object has been correctly updated. Verify that the RODMOPTS statement refers to the correct RODM object.
EQQRM22W
A SPECIAL RESOURCE QUANTITY COULD NOT BE DETERMINED FROM A RODM OBJECT. RESOURCE NAME IS NAME
A RODMOPTS statement specifies that a special resource quantity should be updated by a field in a RODM object. However, the value of the field is not within the valid range of special resource quantities. The valid range is 0–999 999.
The special resource quantity is not changed. The RODM subtask continues normal processing.
Verify that the RODM object has been correctly updated. Verify that the RODMOPTS statement refers to the correct RODM object.
EQQRM23W
A SPECIAL RESOURCE DEVIATION COULD NOT BE DETERMINED FROM A RODM OBJECT. RESOURCE NAME IS NAME
A RODMOPTS statement specifies that a special resource deviation quantity should be updated by a field in a RODM object. However, the value of the field is not within the valid range of special resource deviations. The valid range is -999999 through 999999.
The special resource quantity is not changed. The RODM subtask continues normal processing.
Verify that the RODM object has been correctly updated. Verify that the RODMOPTS statement refers to the correct RODM object.
EQQRM24W
SUBSCRIBE FOR RODM OBJECT NAME FAILED. RETURN CODE IS RC, REASON IS RSN
A nonzero return code was returned by a RODM subsystem when the RODM subtask called the RODM API to add a notify subscription.
The RODM subtask continues normally. If the RODM object is modified later, the RODM subtask is not notified and the corresponding HCL Workload Automation for Z resource is not updated.
Make sure that the current field in the RODM object has a notify subfield. Refer to the RODM Programming Guide for more information about return codes and reason codes used by the RODM API.
EQQRM25I
SUBSCRIBE FOR RODM OBJECT NAME WAS SUCCESSFUL
A zero return code was returned by a RODM subsystem when the RODM subtask called the RODM API to add a notify subscription.
The RODM subtask continues normally. If the RODM class is modified later, the RODM subtask is notified and the corresponding HCL Workload Automation for Z resource is updated.
None.
EQQRM26W
SUBSCRIBE FOR RODM CLASS NAME FAILED. RETURN CODE IS RC, REASON IS RSN
A nonzero return code was returned by a RODM subsystem when the RODM subtask called the RODM API to add a notify subscription.
The RODM subtask continues normally. If the RODM class is modified later, the RODM subtask is not notified and the corresponding HCL Workload Automation for Z resource is not updated.
Make sure that the current field in the RODM class has a notify subfield. Refer to the RODM Programming Guide for more information about return codes and reason codes used by the API.
EQQRM27I
SUBSCRIBE FOR RODM CLASS NAME WAS SUCCESSFUL
A zero return code was returned by a RODM subsystem when the RODM subtask called the RODM API to add a notify subscription.
The RODM subtask continues normally. If the RODM class is modified later, the RODM subtask is notified and the corresponding HCL Workload Automation for Z resource is updated.
None.
EQQRM28W
SUBSCRIBE FOR RODM OBJECT NAME FAILED. RETURN CODE IS RC, REASON IS RSNTHE SCHEDULER WILL RETRY EVERY 3 MINUTES
A nonzero return code was returned by a RODM subsystem when the RODM subtask called the RODM API to add a notify subscription for a RODM object.
The RODM subtask continues normally. HCL Workload Automation for Z tries again after three minutes to add the notify subscription for the RODM object.
None.
EQQRM29W
SUBSCRIBE FOR RODM CLASS NAME FAILED. RETURN CODE IS RC, REASON IS RSN THE SCHEDULER WILL RETRY EVERY 3 MINUTES
A nonzero return code was returned by a RODM subsystem when the RODM subtask called the RODM API to add a notify subscription for a RODM class.
The RODM subtask continues normally. HCL Workload Automation for Z tries again after three minutes to add the notify subscription for the RODM object.
None.