EQQH001 - EQQH712
EQQH001E
THE NETVIEW INTERFACE MODULE CNMNETV COULD NOT BE LOADED
CNMNETV was not found in the library search path.
HCL Workload Automation for Z continues, but the generic alert functions as requested in the GENALERT keyword of the ALERT initialization statement are disabled. Instead, HCL Workload Automation for Z generates WTO messages for the error conditions specified in the GENALERT keyword.
Ensure that the CNMNETV module is accessible and restart HCL Workload Automation for Z.
EQQH003E
SEND GENERIC ALERT TO NETVIEW FAILED WITH RC=RC
Request type 12 sent to the NetView®* PPI failed.
A WTO is issued instead of the generic alert.
Check NetView® documentation for further information.
EQQH201W
AN INCORRECTLY PLACED COMMA AT H20101 IS IGNORED
You have coded a comma that is not required at H20101.
The statement is accepted. The extraneous comma is ignored.HCL Workload Automation for Z continues verifying the statements.
If you rerun the job, remove the extra comma.
EQQH202W
AN INCORRECTLY PLACED COMMA IN THE PARMSTRING IS IGNORED
An unnecessary comma is coded in the parameter.
The parameter is accepted and the extraneous comma is ignored. The HCL Workload Automation for Z continues verifying the commands
Remove the extra comma and rerun.
EQQH203E
THE KEYWORD H20301 APPEARS TOO MANY TIMES
A statement is specified with two or more identical keywords.
HCL Workload Automation for Z continues to verify the statement, but the database is not updated.
Remove the duplicate keyword and rerun.
EQQH204E
THE STATEMENT H20401 IS UNDEFINED
The statement H20401 is not recognized.
Processing of the statement is terminated.
Correct the invalid statement and rerun.
EQQH205E
THE COMMAND IS MISSING OR THE FORMAT IS INVALID
The statement does not start with a valid command.
Processing of the statement is terminated.
Add a valid command or correct the invalid command and rerun.
EQQH206E
AN END OF COMMENT IS MISSING AT THE END OF THE STATEMENT
A start of comment delimiter (/*) has been detected, without a corresponding end of comment (*/).
Processing of the statement is terminated
Add an end of comment (*/) and rerun.
EQQH207W
A MISSING END QUOTE IS ASSUMED AT THE END OF THE STATEMENT
The quote for this character string is not closed.
HCL Workload Automation for Z assumes the quote ends after the control statement.
Add a quote and rerun if required.
EQQH208E
THE KEYWORDS H20801 AND H20802 ARE EXCLUSIVE
Two mutually exclusive keywords are entered on the same statement.
Processing of the statement is terminated.
Remove one of the keywords and rerun.
EQQH209E
AN INVALID RIGHT PARENTHESIS WAS FOUND AT H20901
More right parentheses than left parentheses are coded.
Processing of the statement is terminated.
Correct the number of parentheses and rerun.
EQQH210E
TOO MANY VALUES ARE CODED IN THE KEYWORD H21001
The keyword H21001 has too many coded values.
Processing of the statement is terminated.
Correct the keyword values and rerun.
EQQH211E
AN INVALID VALUE H21101 SPECIFIED OR A KEYWORD IS MISSPELLED
Either the value H21101 is not valid for the keyword or the keyword is misspelled.
Processing of the statement is terminated.
Correct the statement and rerun.
EQQH213E
A VALUE IS MISSING AFTER H21301
Not enough keyword values are specified for H21301.
Processing of the statement is terminated.
Add the missing keyword value (or values) and rerun.
EQQH214E
TOO MANY LEFT PARENTHESES OR AN INVALID VALUE FOUND AT H21401
Too many parentheses are provided at H21401 or you have provided an invalid value for a keyword.
Processing of the statement is terminated.
Correct the statement and rerun.
EQQH215E
TOO MANY LEFT PARENTHESES ARE INSERTED IN THE PARMSTRING
Too many left parentheses are provided.
Processing of the statement is terminated.
Remove the extra left parentheses and rerun.
EQQH216E
A LEFT PARENTHESIS IS MISSING BEFORE H21601
A left parenthesis is missing.
Processing of the statement is terminated.
Add the missing left parenthesis and rerun.
EQQH217E
AN INVALID COMMA IS INSERTED IN H21701
A keyword and its values are separated by an invalid comma.
Processing of the statement is terminated.
Remove the comma and rerun.
EQQH218W
A MISSING RIGHT PARENTHESIS IS ASSUMED AT THE END OF THE STATEMENT
The right parenthesis, which should delimit the end of statement, is missing. Too many items might be specified.
The processing continues.
Specify the keyword and its value in the correct format and rerun.
EQQH219E
THE REQUIRED KEYWORD H21901 IS MISSING
The keyword H21901 is missing from the statement.
Processing of the statement is terminated.
Specify the missing keyword and rerun.
EQQH220E
A REQUIRED KEYWORD IS MISSING. SPECIFY EITHER H22001 OR H22002
You must specify either H22001 or H22002.
Processing of the statement is terminated.
Specify one of the keywords and rerun.
EQQH221E
AN INVALID H22101H22102 WAS FOUND IN THE KEYWORD H22103
The value type H22101 in field H22102 for keyword H22103 is invalid.
Processing of the statement is terminated.
Specify a valid value and rerun.
EQQH222E
AT LEAST ONE KEYWORD MUST BE SPECIFIED FOR STATEMENT H22201
You must specify at least one keyword for H22201.
Processing of the statement is terminated.
Correct the command and rerun.
EQQH223E
THE EMPTY QUOTED STRING IS INVALID FOR THE KEYWORD H22301
No values are specified for keyword H22301.
Processing of the statement is terminated.
Correct the string and rerun.
EQQH224E
REQUIRED KEYWORD(S) MISSING IN COMMAND H22401
One or more required keywords were not found in the statement H22401.
Processing of the statement is terminated.
Correct the statement and rerun.
EQQH301E
NUMERIC FACTOR H30101 EXCEEDS CYCLE H30102 LENGTH
A numeric factor is out of range.
The rule is invalid and is not saved.
Correct the numeric factor or cycle specification and rerun.
EQQH302E
NUMERIC FACTOR H30201 AND WEEKDAY > CYCLE H30202 LENGTH
A numeric factor combined with a week day exceeds the period length. The name of a predefined cycle is preceded by two unprintable characters (..).
The rule is invalid and is not saved.
Correct the numeric factor or cycle specification and rerun.
EQQH303E
THE USER PERIOD H30301 DOES NOT EXIST
The specified user period or period automatically generated from a run cycle group is invalid. The name of the scheduler predefined cycles is preceded by two unprintable characters (..).
The rule is invalid and is not saved.
Correct the period specification and rerun.
EQQH304E
THE CALENDAR H30401 DOES NOT EXIST
The specified calendar H30401 is invalid.
The rule is invalid and is not saved.
Correct the calendar specification and rerun.
EQQH305E
ORIGIN SHIFT H30501 IS TOO LARGE FOR THE PERIOD H30502.
The number specified for origin shift is out of range for period H30501 (either a user period or a period automatically generated from a run cycle group). The name of the scheduler predefined cycles is preceded by two unprintable characters (..).
The rule is invalid and is not saved.
Correct the origin shift or period specification and rerun.
EQQH306W
SELECTION OF EVERY AND FIRST/LAST - INTERPRETED AS EVERY
You have selected both EVERY and FIRST (or numeric 1) or EVERY and LAST during the definition of a rule. The rule is interpreted as EVERY without any numeric factor. This may not be what you intended.
The system waits for you to respond.
Decide whether the rule should be defined using EVERY or ONLY. Change the selected fields if required. If you are unsure of the affect of EVERY and ONLY use the GENDAYS command.
EQQH308W
DUPLICATE VALUE(S) H30801 IGNORED.
You have specified duplicate values. Only one of the values is used.
The duplicate value is removed.
Check the specified values and correct them if necessary.
EQQH309E
THE SAVED RULE VALUE HAS BEEN DESTROYED, PLEASE REENTER THE INFO
The rule value saved on the application description database is invalid and cannot be used.
The rule is invalid and must be reentered before use.
Reenter the rule and rerun.
The dump data set (ddname EQQDUMP) contains a dump of the rule value.
EQQH310E
UNEXPECTED ERROR IN THE CALENDAR ROUTINE
The calendar routine used in the rule interpretation or date generation has returned an unexpected reason code.
Processing of this specific rule cannot continue.
This is likely to be an internal error. If possible, rerun the request.
The dump data set (ddname EQQDUMP) contains a dump of the control blocks.
EQQH401I
NO DATE GENERATED BY THIS RULE
No date is generated by this rule.
No dates are generated.
Check the rule and the validity period.
EQQH402W
THE PERIOD H40201 HAS NO ORIGIN WITHIN RULE VALIDITY.
The period H40201 (either a user period or a period automatically generated from a run cycle group) has no origin within rule validity period.
No dates are generated.
Correct the period specification or validity period and rerun.
EQQH501W
NUMERIC FACTOR H50101 EXCEEDS CYCLE H50102 LENGTH
A numeric factor is out of range.
The rule is invalid and is not saved.
Correct the numeric factor or cycle specification and rerun.
EQQH502W
NUMERIC FACTOR H50201 TOGETHER WITH WEEKDAY EXCEEDS CYCLE H50202 LENGTH
A numeric factor combined with a week day exceeds the period length. The name of a predefined cycle is preceded by two unprintable characters (..).
The rule is invalid and is not saved.
Correct the numeric factor or cycle specification and rerun.
EQQH503W
THE PERIOD H50301 DOES NOT EXIST
The specified user period or period automatically generated from a run cycle group is invalid. The name of the scheduler predefined cycles does not exist.
The rule is invalid and is not saved.
Correct the period specification and rerun.
EQQH504W
THE CALENDAR H50401 DOES NOT EXIST
The specified calendar H50401 is invalid.
The rule is invalid and is not saved.
Correct the calendar specification and rerun.
EQQH505W
ORIGIN SHIFT H30501 IS TOO LARGE FOR THE PERIOD H30502.
The number specified for origin shift is out of range for period H50501 (either a user period or a period automatically generated from a run cycle group). The name of a predefined cycle is preceded by two unprintable characters (..).
The rule is invalid and is not saved.
Correct the origin shift or period specification and rerun.
EQQH509W
THE SAVED RULE VALUE HAS BEEN DESTROYED, PLEASE REENTER THE INFORMATION
The rule value saved on the application description database is invalid and cannot be used.
The rule is invalid and must be reentered before use.
Reenter the rule and rerun.
The dump data set (ddname EQQDUMP) contains a dump of the rule value.
EQQH511E
CALENDARS DATASPACE CREATION FAILED
An error occurred while the batch program or the normal mode manager subtask was trying to create the calendar dataspace.
The job or the normal mode manager is terminated.
Review the HCL Workload Automation for Z message log to determine the cause of the error. If you cannot determine the cause and if the error persists, search the IBM Support database for a solution at Support. If you do not find any information, for the information to collect, see the Diagnosis Guide and Reference manual, Chapter 3. Problem analysis procedures, section "Information needed for all problems. Search the IBM Support database for a solution at Support.
Contact your system programmer.
EQQH700I
HIGHEST RETURN CODE FROM PARSER IS H70001
This information message is displayed after parsing a date generating rule. The short message is set to 'VALID RULE' if the parser returns 04 or lower, 'INVALID RULE' for all other return codes. The return code value is shown in H70001. This message is followed by one or more information or warning messages for a valid rule, and by up to five error messages for an invalid rule.
If 'VALID RULE' is returned, the date generating rule definition is accepted. If 'INVALID RULE' is returned, the rule is rejected.
If the rule is rejected, correct the rule definition according to the diagnostics provided by the messages.
EQQH701E
EITHER ONLY OR EVERY MUST BE SELECTED
ONLY and EVERY are mutually exclusive and one of them has to be selected for a valid rule definition.
The request is rejected.
Select one of ONLY and EVERY.
EQQH702E
MAKE AT LEAST ONE SELECTION/SPECIFICATION FROM EACH RULE SECTION
You have failed to make at least one selection/specification from each rule section.
The request is rejected.
Select at least one from each section.
EQQH703E
THE ENTRY IS INVALID, ENTER XRSEL OR LEAVE BLANK
You have entered an invalid value in the selection field.
The request is rejected.
Change the field to a valid value.
EQQH704E
THE ENTRY IS INVALID, ENTER A DAY IN THE RANGE 1 TO 999
You have entered an invalid day in the field. It must be in the range 1 to 999.
The request is rejected.
Change the day to a valid value.
EQQH705E
A PERIOD NAME BEGINS ALPHABETICALLY, REMAINDER IS ALPHANUMERIC
You have not entered a valid period name. A valid period name must be maximum of eight characters, where the first character must be alphabetical and the remaining characters must be alphanumeric or national.
The request is rejected.
Specify a valid period name.
EQQH706E
THE ENTRY IS INVALID, ENTER A VALUE IN THE RANGE 1 TO 53
You have entered an invalid week number in the field. It must be in the range 1 to 53.
The request is rejected.
Change the week number to a valid value.
EQQH707E
THE ENTRY IS INVALID, ENTER A NUMBER IN THE RANGE 0 TO 999
You have entered an invalid number in the field. It must be in the range 0 to 999.
The request is rejected.
Change the number to a valid value.
EQQH708E
H70801 TOGETHER WITH SPECIFIC H70801 SELECTION(S) IS AMBIGUOUS
- DAY together with specific days, for example, WORKDAY, MONDAY, FRIDAY
- WEEK together with specific week numbers, for example, WEEK 26 and WEEK 34
- MONTH together with specific months, for example, APRIL, AUGUST and DECEMBER.
The request is rejected.
Remove the redundancies to make the selection unambiguous.
EQQH709E
RULE DEFINITION CANNOT BE MAPPED, THE RULE MUST BE REDEFINED
The internal representation of a rule cannot be interpreted and the corresponding rule command cannot be derived from it. This is most likely caused by an internal error of the product.
The rule command is not mapped and rule selections are not shown.
Copy the application description (AD) temporarily to another AD identification. Update the original AD by redefining the erroneous rule so as to be able to continue using the original rule or rules. Contact your local system administator to pursue the error analysis using the copied version.
EQQH710I
NO DATES GENERATED FOR THE INTERVAL IVLFROMIVLTO
GENDAYS is unable to generate dates for the rule and interval specified.
No dates are generated.
Check the rule definitions and other factors that have an impact on date generation, for example, interval, calendar, user periods, and free day rule.
EQQH711E
INTERVAL START IVLFROM IS LATER THAN INTERVAL END IVLTO
The start date of the generating interval is later than the end date.
- Run cycle in-effect date
- Application description (AD) valid-from date
- 1 January of the current year.
- Run cycle out-of-effect date
- AD valid-to date
- 31 December of the current year plus three years.
The request is rejected.
Check the dates, correct any inconsistency, and reenter the GENDAYS command.
EQQH712E
UNABLE TO GENERATE DATES FOR THE INTERVAL IVLFROMIVLTO
GENDAYS is not able to generate dates for the rule because the entire requested interval is outside the limits of the internal calendar
- The start date of the interval is the later of the run cycle in-effect date and the application description (AD) valid-from date.
- The end date of the interval is the earlier of the run cycle out-of-effect date and the AD valid-to date.
The request is rejected.
Check the dates for the interval, correct any inconsistency, and reenter the GENDAYS command.