Notes.ini settings
These IBM® Notes® parameters can be used to change or override IBM Traveler default values. For most installations, changing these settings is unnecessary. They are provided here for your reference in cases where the default values are not compatible with an existing system.
There are only a few parameters that are required to be
specified in notes.ini
. Any of the optional parameters
that are not specified in notes.ini
have a default
value that will be described in the following table.
Many more parameters exist than the ones listed here. All of the IBM Traveler server
configuration parameters can be seen in a system dump, or by issuing the command tell
traveler config
in the Domino® console. Please do
not attempt to set any other notes.ini
parameter values for IBM Traveler server
unless directed to do so by IBM® support.
Unless
otherwise specified, the following parameters, by default, are contained
in notes.ini
.
Parameter | Value | Description |
---|---|---|
NTS_64_BIT |
Set during installation to indicate whether the server is running a 64-bit operating system.
Default value is |
If |
NTS_ADDRESSCACHE_CN_WITH_DOMAIN |
Default is |
Whether or not to append the Domino® domain to the Canonical Name when addresses are converted. For more information, see Name lookup. |
NTS_ADDRESSCACHE_ENABLED_ANDROID_MAIL |
Default is |
Whether or not the address cache is enabled for Android devices for data synced server to device. For more information, see Name lookup. |
NTS_ADDRESSCACHE_ENABLED_AS_CALENDAR |
Default is |
Whether or not the address cache is enabled for devices for calendar data synced server to device using Exchange ActiveSync. For more information, see Name lookup. |
NTS_ADDRESSCACHE_ENABLED_AS_CONTACTS |
Default is |
Whether or not the address cache is enabled for devices for contact data synced server to device using Exchange ActiveSync. For more information, see Name lookup. |
NTS_ADDRESSCACHE_ENABLED_AS_MAIL |
Default is |
Whether or not the address cache is enabled for devices for mail data synced server to device using Exchange ActiveSync. For more information, see Name lookup. |
NTS_ADDRESSCACHE_ENABLED_DEVICE_ |
Default is |
Whether or not the address cache is enabled for all devices for data synced device to server. For more information, see Name lookup. |
NTS_ADDRESSCACHE_ENABLED_SYM_MAIL |
Default is |
Whether or not the address cache is enabled for Nokia devices for data synced server to device. For more information, see Name lookup. |
NTS_ADDRESSCACHE_ENABLED_WM_MAIL |
Default is |
Whether or not the address cache is enabled for Windows™ Mobile devices for data synced server to device. For more information, see Name lookup. |
NTS_ADDRESSCACHE_ENCODING_ |
Default is |
Whether or not the address encoding is enabled for devices for data synced server to device using Exchange ActiveSync. For more information, see Name lookup. |
NTS_ADDRESSCACHE_EXPINTERVAL |
Default is 30 minutes. |
How often to check for expired (based on |
NTS_ADDRESSCACHE_LIFETIME |
Default is 1440 minutes. |
How long an item is allowed in the cache until it becomes eligible for deletion. |
NTS_ADDRESSCACHE_LOOKUP_ |
Default is |
List of fields that count as the canonical name. The rder of these fields are important for priority of results returned. First item has highest priority, then second, and so on. |
NTS_ADDRESSCACHE_LOOKUP_ |
Default is |
List of fields that count as the internet address. The order of these fields are important for priority of results returned. First item has highest priority, then second, and so on. |
NTS_ADDRESSCACHE_LOOKUP_ |
Default is |
The views in Domino® |
NTS_ADDRESSCACHE_LOOKUP_ |
Default is |
List of items used for duplicate resolution. If two or more results contain the same value for these items, the first result will be kept and the others discarded. |
NTS_ADDRESSCACHE_MAX_ENTRIES |
Default is 10000 |
How many items are allowed in the cache before the oldest ones start being deleted to create room for new entries. |
NTS_ADMIN_CLEANUP_TIMEOUT |
Default is 30. |
Number of days after which security data for a deleted device will be removed from IBM Traveler. If security data needs to be immediately removed during device deletion, set the value to 0. This is a server level setting and will affect all deleted devices. |
NTS_AIS_AI_PROMOTION_BIAS |
Default is 10. |
Sets how much to bias the AI for each promotion (to determine if it is possible to do more promotions). |
NTS_AIS_AI_THRESHOLD |
Default is 40. |
The availability index that the server must be above to allow promotions. |
NTS_AIS_ENABLED |
Default is |
Determines if the server should use adaptive initial sync logic. |
NTS_AIS_CHECK_INTERVAL |
Default is 60 |
Number of seconds between checks for users to promote. |
NTS_AIS_INITIAL_FILTER_DAYS |
Default is 0. |
Number of days back in the initial filter window (0 = today (midnight), 1 = yesterday (midnight), and so on...) |
NTS_AS_ALLOW_DS_FOLDER_CHANGES |
Default is |
Enables Microsoft Exchange ActiveSync mobile devices to create, rename, move, and delete mail folders from their devices. Note that folder operations on the device are only available when the device is online and is able to connect to the IBM Traveler server. |
NTS_AS_INCLUDE_ROOMS |
Default is 75 |
The size of the meeting location field at which IBM Traveler prepends any room information to the meeting description field for Microsoft Exchange ActiveSync devices. IBM Traveler appends room data to the location field, but ActiveSync devices may truncate the display of the location field. |
NTS_ATTACHMENT_PRESTREAM |
Default is |
Determines whether Traveler "pre-streams" email attachments from Domino to count the bytes so that an accurate attachment size is sent to the device before streaming the attachment data. Pre-streaming email attachments to count the bytes takes time, particularly if the network
connection between the Traveler server and the mail server has high latency, so the default setting,
On some devices (for example, BlackBerry), attachment streaming operations fail if the number of
bytes streamed does not exactly equal the attachment size. If such users are having trouble
streaming attachments, setting this to |
NTS_AUTO_CONFIG |
Set to |
If set to |
NTS_AUTO_DBSCHEMA |
Default is |
Set to |
NTS_AUTOSTART_HTTP |
Default is |
If true, IBM Traveler will start or restart the HTTP server as needed at run time to ensure
proper functionality. If false, it is up to the Domino®
Administrator to ensure HTTP starts correctly, usually done by adding HTTP to the ServerTasks list
in the |
NTS_AUTOSTOP_HTTP |
Default is |
If |
NTS_BANNED_DOC_APPTUNID |
Default is |
When enabled, Traveler includes calendar events (by APPTUNID) as part of crash protection processing. |
NTS_BANNED_DOC_LIMIT |
Default is 5. |
Determines the number of crashes associated with a Notes document before it is banned. A setting of 0 will disable crash protection. |
NTS_BANNED_DOC_DUMP |
Default is |
When set to |
NTS_BANNED_DOC_MAX_AGE_DAYS |
Default is 14 days. | The maximum number of days to keep documents in the banned candidate list after being marked during crash protection processing. |
NTS_BANNED_DOC_PURGE_ |
Default is 14400 seconds (4 hours) | Interval in seconds at which Traveler checks the banned document list to purge old records. Applies to banned documents that were deleted from the user's mail file and banned document candidates whose time since last marked exceeds the value specified by NTS_BANNED_DOC_MAX_AGE_DAYS. |
NTS_BANNED_DOC_SYNCS |
Default is 3. |
Determines the number of crashes associated with a Notes®
user before the crash protection function will start banning documents that have a crash count
greater than or equal to what is set in |
NTS_BUILD |
Set to the version and build number of the IBM Traveler server during installation. |
The version and build number of the IBM Traveler server. This parameter is listed here for documentation purposes only. Please do not modify the value of this parameter. |
NTS_CALENDAR_GHOSTING_SYNCML |
The default is |
Allows meeting invitations to be "ghosted" on the Verse mobile client calendar (iOS and Android). Ghosting enables you to see the original invitation and schedule change correctly. |
NTS_CLIENT_CONFIG_DEFAULT_ |
Default is |
Sets the default logon name used during client configuration. Possible values are
|
NTS_CLIENT_INSTALL_LINK_ANDROID_ |
Default is the link to the Android Verse client on GooglePlay. |
Specifies the link for downloading the IBM Verse client for Android devices. By default, this is
GooglePlay. This can be changed to point to a different app store location.
Note: You can also use
MyStore as the value to insert non-linked text stating that the app should be
obtained from your company's app store. |
NTS_CLIENT_INSTALL_LINK_APPLE_ |
Default is the link to the Apple Verse client on the Apple App Store. |
Specifies the link for downloading the IBM Verse client for Apple devices. By default, this is
the Apple App Store. This can be changed to point to a different app store location.
Note: You can
also use MyStore as the value to insert non-linked text stating that the app should
be obtained from your company's app store. |
NTS_COMPANION_INSTALL_LINK_ |
Default is the link to the Traveler Companion app on the Apple App Store. |
Specifies the link for downloading the Traveler Companion app. By default, this is the Apple App
Store. This can be changed to point to a different app store location.
Note: You can also use
MyStore as the value to insert non-linked text stating that the app should be
obtained from your company's app store. |
NTS_COMPANION_MINIMUM_VERSION |
Default is 9.0 |
Sets which minimum (and later) versions of IBM Traveler Companion are allowed. Prevents IBM Traveler Companion from syncing with the server until it is updated from the Apple App Store. |
NTS_CLIENT_UPDATE |
Set to |
This parameter indicates that the IBM Traveler server should update the client images that are
stored in the database during startup. When complete, this parameter is automatically removed from
|
NTS_CONSOLE_REQUEST_RESPONSE |
Default is |
If set to
|
NTS_DB2_SCHEMA |
Not set by default. |
Set to specify the schema name for the DB2 database if you are manually managing the DB2 schema or if you are changing the DB2 user name. |
NTS_DB_CONNECTION_THROTTLING |
Default is |
If set to |
NTS_DBCONNECTIONURL |
No default value. Set to |
This parameter must be specified to indicate which database to use for synchronization data. During installation, the IBM Traveler server is configured to use Derby in a stand-alone environment. To change the server to be part of a High Availability (HA) pool, this value must be configured to use either DB2® or SQL Server. The travelerUtil utility should be used to change this and other related parameters when reconfiguring the server to be in an HA pool. |
NTS_DBCONNECTIONURL_EXT |
Not set by default. |
Use this parameter when the value for |
NTS_DBPASSWORD |
No default value. |
Use this parameter if you are having issues running the travelerUtil application to set the
enterprise database password. Restart the Traveler server for the setting to take effect. On
restart, the parameter will be consumed and removed from the |
NTS_DBUSER |
No default value. |
Use this notes.ini parameter if you are having issues running the travelerUtil application to set
the enterprise database user name. Restart the Traveler server for the setting to take effect. On
restart, the parameter will be consumed and removed from the |
NTS_DBPATH |
Path to the JDBC JAR for the IBM Traveler server to use in connecting to the database. The default value is the empty string. |
This parameter must be set when the |
NTS_DEVICE_APPROVAL_ADMIN_URL_BASE | Default value is empty string. | If set will use the configured value as the Base portion of the device
approval action URL for administrators, otherwise will use the external URL. Ex: https://hostname.domain Note: This parameter along with
NTS_DEVICE_APPROVAL_ADMIN_URL_PATH should form a fully qualified URL. Use just this
parameter if you wish to use the default device security view for the Path portion of the
URL but with a different host name than specified in the External URL. |
NTS_DEVICE_APPROVAL_ADMIN_URL_PATH | Default value is empty string. | If set will use the configured value as the Path portion of the device
approval action URL for administrators, otherwise will use the LotusTraveler.nsf device
security view. Ex: /LotusTraveler.nsf/xDevicesSecurity.xsp Note: This parameter along with
NTS_DEVICE_APPROVAL_ADMIN_URL_BASE should form a fully qualified URL. Use just this
parameter if you wish to use the host name from the External URL as the base portion of the
URL and this configured value as the Path portion of the URL. |
NTS_DEVICE_ID_ALLOWED_REGEX |
|
For a device to be allowed to sync, its ID must match this regular expression. This can be used to only allow certain device IDs to be allowed to sync with the server. This is useful in cases where the user-agent is not unique enough to be the blocking mechanism. |
NTS_DEVICE_SYNC_TIME_LIMITS_INHERIT_FROM_ |
Default is |
If set to |
NTS_DEVICE_SYNC_TIME_LIMITS_INHERIT_FROM_ |
Default is |
If set to |
NTS_DEVICE_TYPE_DEVICE_ID_ |
|
If the sync request is SyncML based, Device IDs matching this regular expression will be
classified as Android running the IBM Traveler application. That Device Type will then be checked
against If the sync request is not SyncML based, Devices IDs matching this regular expression will be classified as another, non-supported Android client. |
NTS_DEVICE_TYPE_DEVICE_ID_ |
|
Device IDs matching this regular expression will be classified as |
NTS_DEVICE_TYPE_DEVICE_ID_APPLE |
|
Device IDs matching this regular expression will be classified as |
NTS_DEVICE_TYPE_DEVICE_ID_BB |
|
Device IDs matching this regular expression will be classified as BlackBerry devices. That Device
Type will then be checked against |
NTS_DEVICE_TYPE_DEVICE_ID_IBM_APPLE |
|
Device IDs matching this regular expression will be classified as Apple running the IBM Verse on
Apple iOS application. That Device Type will then be checked against
|
NTS_DEVICE_TYPE_DEVICE_ID_IBM_ |
|
Device IDs matching this regular expression will be classified as |
NTS_DEVICE_TYPE_DEVICE_ID_IBM_ |
^mdmxx |
Device IDs matching this regular expression will be classified as running the IBM MaaS360
provided apps, but the user-agent string is also needed to further differentiate the device (Android
or Windows Phone). That Device Type will then be checked against
|
NTS_DEVICE_TYPE_DEVICE_ID_NOKIA |
Default is |
Device IDs matching this regular expression will be classified as Nokia devices. That Device Type
will then be checked against |
NTS_DEVICE_TYPE_DEVICE_ID_SECUREPIM |
Default is |
Device IDs matching this regular expression will be classified as SecurePIM devices. That Device
Type will then be checked against |
NTS_DEVICE_ID_ALLOWED_REGEX |
|
For a device to be allowed to sync, its ID must match this regular expression. This can be used to only allow certain device IDs to be allowed to sync with the server. This is useful in cases where the user-agent is not unique enough to be the blocking mechanism. |
NTS_DOMINO_LINK_BASE_REF |
URL. Default is not set. |
Rarely used. If this value is set, then all links will redirect to this URL prefix instead of a
user's mail server. The value format would be similar to
|
NTS_DOMINO_LINK_PORT |
Number. Default is not set. |
Set to a specific TCP port number if the Domino® HTTP service running on your mail servers is using a port other than 80 or 443. This port will be used for all mail servers. As a result, it is important that these servers be configured consistently. |
NTS_DOMINO_LINK_PROTOCOL |
"http" or "https". Default is not set. |
If your Domino® mail servers are configured to use SSL,
set this value to |
NTS_DOMINO_LINK_SUPPORT |
0 or 1. Default is 1. |
Set to |
NTS_DOMINO_THREADS_OPTIMIZE_ |
Default is |
Controls whether IBM Traveler threads that use Domino API calls are Domino initialized and terminated when IBM Traveler is done with the thread and the thread is destroyed (true) or when each usage of the thread for a user's device is done but the thread is not destroyed (false). True saves the overhead of doing the initialization and termination for each user's device but NRPC connections are cached per thread and only released upon the termination. If your IBM Traveler server is talking over NRPC to a large number of mail servers (for example, more than 100) and the IBM Traveler server is running out of TCP/IP network ports, you may want to change this value to False to force more frequent thread terminations which release NRPC connections more frequently. |
NTS_ENCRYPTION_ENABLED |
Default is |
Enabling this feature allows mobile users to read and send encrypted mail messages from their mobile devices. This requires that users load their Notes® ID files into their mail files. If encryption is disabled, users cannot send encrypted mail and cannot view it on their devices. Note: If you modify this setting, and you already have IBM Traveler 8.5 or 8.5.1 clients registered
with the IBM Traveler server, then it is important to notify the client devices that the encryption
status on the server has changed.
To instruct all of the IBM Traveler clients to retrieve their configuration setting from the server, issue the following console command: tell traveler push flagsAdd serviceability configGet * * |
NTS_ENCRYPTION_REQUIRES_SSL |
Default value is |
Controls whether SSL is required to read encrypted mail on the mobile device. |
NTS_EXTERNAL_HTML_ROOT_URL |
The default value is the empty string. |
This is the complete URL, including https://, server name, the port number (if not the default), and the file path (/) that the device uses to get to the server for HTML content. This can be a proxy or redirected address. This is used by the server so that links are properly formatted for the device to get to the server as it does for static HTML pages and files. |
NTS_EXTERNAL_URL |
The default value is blank. |
This is the complete URL, including |
NTS_FREE_BUSY_SUPPORT | Default is true . |
Whether or not to allow queries to the free/busy database for the availability feature. |
NTS_FREE_BUSY_MAX_RECIPIENTS | Default is 20. | The maximum number of invitees for which the server will check availability. |
NTS_FREE_BUSY_MAX_RANGE_HOURS | Default is 4380 (6 months). | The maximum number of hours in a single range for which a device can request availability. |
NTS_FOLDER_TRASH_SYNC |
Default is |
If set to |
NTS_HOST_IP_ADDR |
The default value is the IP address of the primary active network interface of the machine on which IBM Traveler Server is running. |
This property can be used to override this selection if the wrong IP address is chosen. This could happen if the server has multiple active network interfaces and it is desirable for the server to use an interface other than the one that was selected. NTS_HOST_IP_ADDR applies only to IBM Traveler and not the APNS library or other third party libraries. |
NTS_HTTP_REFERER_ALLOWED_REGEX |
Default value is based on the last two parts of the host name of the
|
When the HTTP Referer header is present on a request (most often in the IBM Traveler servlet web pages which link to each other), the header is checked against this regular expression to determine if the request should be allowed or not. If the HTTP Referer header is present and does not match this regular expression, the request will be denied. The regular expression can be made more or less restrictive based on the need. Using
|
NTS_IBM_IOS_LOCAL_CONTACTS_SYNC |
Default is |
Sets whether or not users can export their IBM Verse contacts to the native Contacts app on their iOS device. |
NTS_INSTALLATION_TYPE |
Set during installation to indicate the installation type. Set to |
Certain installation types cause IBM Traveler server to function differently. This parameter is listed here for documentation purposes only. Please do not modify the value of this parameter. |
NTS_IOS_CALENDAR_INITIAL_GHOST |
The default is |
Traveler will ghost meeting updates to the Apple iOS Calendar application's calendar even when the initial invitation has not been accepted yet. Ghosting enables you to see the original invitation and schedule change correctly. Applies to iOS 9 or later |
NTS_JAVA_PARMS |
The default value is blank |
This sets various Java parameters for the IBM Traveler JVM. If more than one parameter is specified, they will be separated by a space. This is not recommended. Starting with IBM Traveler 9.0.1, the Java heap memory will be calculated as 512MB for 32-bit machines. For 64-bit machines, the value will be the greater of either 1024MB or 25% of the physical memory. |
NTS_LINKHTMLALT |
0 or 1. Default is 0. |
Set to |
NTS_LOG_COLLECT_DATE_RANGE |
Default is 14 days. |
Specifies the number of days of data to gather during log collection or a
|
NTS_LOG_GLOBAL_MAXAGE |
Default is 90 days. |
Sets the maximum age of any IBM Traveler log file. Files older than this range will be removed. Each log file has its own age parameter, see the log handler tell command for details. |
NTS_LOG_ROOT_DIR |
Default is 0. |
Used to change the log directory for IBM Traveler. The default directory is
data |
NTS_LOG_USER_EXPIRATION |
Default is 14 days. |
Specifies the expiration value in days for a |
NTS_LOOKUP_ENFORCE_ACL |
Default is 0. |
Set to 1 to enforce access control for corporate lookup at a user level. Customer should only set to 1 if they use directories that specifically allow and disallow access to certain levels of information. For example, if they use Extended ACL to control lookup results. If set to 0 (or not present), corporate lookup will be performed at a server access level and not user access level, and will therefore not honor access settings such as Extended ACL. If set to 1, you must also ensure the following:
For more information on enabling and using this parameter, refer to Corporate lookup settings. |
NTS_MIGRATION_FINISHED |
Default is |
Automatically set to |
NTS_MIME_ENSURE_PLAIN_TEXT |
Default is |
If set to |
NTS_NAME_LOOKUP_EMAILADDRESSITEMS |
Default is Internet. |
Address Fields that specify a mail address to be used by the device. These fields will be encoded if they contain characters or address formats not supported by mobile devices. The encoded address can then be used on the device to send, reply to or forward mail, and the server will properly decode and send the item. NTS_LOOKUP_ENFORCE_ACL |
NTS_NAME_LOOKUP_FLAGS |
Default is 40. |
0 - Exact match and return first match found 8 - Will match partial names and return first match found 32 - Exact match and will perform exhaustive search of all catalogs 40 (default) - Partial match and will perform exhaustive search of all catalogs. |
NTS_NAME_LOOKUP_ITEMS_EXT |
Default value (in desired sort order): |
Items to use in the name look up search. These should match to fields in the Domino® directory or other LDAP directory. The items should be in desired
sort order of the returned items. Due to line length limitations, if you change the default items,
you must use multiple
notes.ini parameters to specify the full list, similar to the
following:
|
NTS_NAME_LOOKUP_MAX_RECORDS |
Default is 30. |
The number of records to send to the mobile device for a name look up request. The list is sorted based on order of name lookup items and then truncated to this value. Increasing this value can effect performance of the mobile device. |
NTS_NAME_LOOKUP_MIN_LENGTH |
Default is 3. |
The minimum number of characters that need to be entered before actually performing a name look up search request. Android devices also have a setting on the device to control how many characters are typed before sending the search request. |
NTS_NAME_LOOKUP_NAMESPACE |
Default is |
The views in Domino® |
NTS_NAME_LOOKUP_UNIQUEITEMS |
Default is |
Searching multiple directories can often result in duplicate name look up results being returned.
This field is used to identify fields that are required to be unique in the look up results. For
example, name look up will not return two results with the same |
NTS_NEW_INSTALL |
Set to |
The installation code performs special processing during the first installation of the IBM Traveler server. This parameter is listed here for documentation purposes only. Please do not modify the value of this parameter. |
NTS_OFFERNOTESURLINLINK |
0 or 1. Default is 1. |
Set to |
NTS_PMRUPLOAD_HOST |
Default is |
Sets the server to which support files will be uploaded. |
NTS_PMRUPLOAD_PORT |
Default is 22. |
Sets the port for a support upload. The port defaults for the protocols are:
|
NTS_PMRUPLOAD_PROTOCOL |
Default is SFTP. |
Sets the method of a support upload. Choices are SFTP, FTP or FTPS |
NTS_PORT_PUSH_TCP |
Default is |
Sets the interprocess socket connection between the IBM Traveler server and older clients (versions 8.5.1 and older). |
NTS_PORT_SERVLET |
Default is |
Sets the interprocess socket connection between the IBM Traveler server and its HTTP server
servlet. This is the servlet listening port number. Add this |
NTS_PORT_TRAVELER |
Default is |
Sets the interprocess socket connection between the IBM Traveler server and its HTTP server
servlet. It is also used for inter-server communication between servers in an HA pool. This is the
port used by the IBM Traveler server task for incoming requests from the web servlet or commands
from other servers. Add this |
NTS_PRIMESYNC_FIRST_SYNCS_APPS |
Default is |
Lists applications that should have the Prime Sync First Syncs limits applied to them. Choices (comma separated list): FOLDERS, MAIL_INSIDE_AIS, MAIL_OUTSIDE_AIS, CALENDAR_INSIDE_AIS, CALENDAR_OUTSIDE_AIS, CONTACTS, TODOS, JOURNAL |
NTS_PRIMESYNC_FIRST_SYNCS_ENABLED |
Default is |
Controls whether Prime Sync First Sync limits are applied or not |
NTS_PRIMESYNC_FIRST_SYNCS_MAX_ |
Default is 5 . |
The maximum number of users who are allowed to perform a prime sync that is considered a "first sync". A first sync is any time the filter on the amount of data is increased. For example, expanding a mail filter from 3 days to 7 days. In addition, starting from scratch is also considered a first sync, as it is beginning from zero. |
NTS_PRIMESYNC_FIRST_SYNCS_MAX_ |
Default is 1 . |
Maximum number of users who are using IMSMO who are allowed to perform a prime sync that is considered a "first sync". This is an additional check such that the TOTAL can be larger than the IMSMO limit, but IMSMO can never be more than the TOTAL. |
NTS_PRIMESYNC_FIRST_SYNCS_MIN_AI_MAIL |
Default is 0. |
The minimum Mail server availability index to allow a first sync prime sync of mail. A value of 0 indicates the availability index is not checked. |
NTS_PRIMESYNC_FIRST_SYNCS_MIN_AI_ |
Default is 0. |
The minimum IBM Traveler server availability index to allow a first sync prime sync of mail. A value of 0 indicates the availability index is not checked. |
NTS_PRIMESYNC_FIRST_SYNCS_RETRY |
Default is 5000 milliseconds |
How long to wait when the max has been reached before retrying. |
NTS_PRIMESYNC_TIME_LIMITS_CALENDAR_DAYS |
Default is 30. |
The maximum number of days allowed for a first sync prime sync of calendar data. |
NTS_PRIMESYNC_TIME_LIMITS_CALENDAR_ |
Default is |
Sets whether or not NTS_PRIMESYNC_TIME_LIMITS_CALENDAR_DAYS should be applied. |
NTS_PRIMESYNC_TIME_LIMITS_MAIL_DAYS |
Default is 30. |
The maximum number of days allowed for a first sync prime sync of mail data. |
NTS_PRIMESYNC_TIME_LIMITS_MAIL_ENABLED |
Default is |
Sets whether or not NTS_PRIMESYNC_TIME_LIMITS_MAIL_DAYS should be applied. |
NTS_PS_CHANGE_THRESHOLD |
Default is 50. |
Prime syncs detect the changes in a user's mail database since the last time it was checked. Normally, these checks are relatively frequent, which means that the number of changes since the previous check should be relatively small. If the number of changes is above the threshold set in NTS_PS_CHANGE_THRESHOLD, it can indicate an issue with the mail server or database. An exception could be if the user is frequently inactive for long periods of time, then the time between checks will also be longer, meaning a larger number of changes would be expected and may not indicate an issue. |
NTS_PUSH_ALERTS_ALLOW_SENDER |
Default is |
Who the item is from (for example, the |
NTS_PUSH_ALERTS_ALLOW_SUMMARY |
Default is |
The identifying information for the item. This will be the subject of mail, calendar, and To Do items. This will be the group name for a group contact and the first and last name of an individual contact. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default is blank. |
For use with the To Dos app from the Apple app store using Apple's production APNS server. This would be used to change the built-in p12 file name to a custom p12 file. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default is blank |
For use with the To Dos app from the Apple app store using Apple's production APNS server. This would be used to change the password associated with the p12 file. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default is |
For use with the To Dos app from the Apple app store using Apple's production APNS server. How often, in minutes, to check the Apple feedback service for APNS tokens that have been revoked. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default is |
For use with the To Dos app from the Apple app store using Apple's production APNS server. The Apple server to which the feedback requests should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default is |
For use with the To Dos app from the Apple app store using Apple's production APNS server. The Apple server port number to which the feedback requests should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default is 3 . |
For use with the To Dos app from the Apple app store using Apple's production APNS server. The number of retries to attempt when sending an APNS message before giving up and returning an error. Min 1, Max 15. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default is blank. |
Specifies the password used to authenticate with the proxy for the To Dos app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default is |
Specifies the port number used to authenticate with the proxy for the To Dos app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default is blank. |
Specifies the host name used to authenticate with the proxy for the To Dos app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default is |
Specifies the port type on which the proxy is listening for the proxy for the To Dos app signed with the development certificate. At this time, only HTTP is supported. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default value is blank. |
Specifies the user name on which the proxy is listening for the proxy for the To Dos app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default value is |
For use with the To Dos app from the Apple app store using Apple's production APNS server. The Apple server to which the APNS message should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default value is 15 |
For use with the To Dos app from the Apple app store using Apple's production APNS server. The number of concurrent persistent connections to the APNS server (min is 1, max is 15) For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default value is |
For use with the To Dos app from the Apple app store using Apple's production APNS server. The Apple server port number to which the APNS message should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default value is blank |
For use with the To Dos app from the Apple app store using Apple's sandbox APNS server. This would be used to change the built-in p12 file name to a custom p12 file. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default value is blank |
For use with the To Dos app from the Apple app store using Apple's sandbox APNS server. This would be used to change the password associated with the p12 file. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default value is |
For use with the To Dos app from the Apple app store using Apple's sandbox APNS server. How often, in minutes, to check the Apple feedback service for APNS tokens that have been revoked. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default value is |
For use with the To Dos app from the Apple app store using Apple's sandbox APNS server. The Apple server to which the feedback requests should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default value is |
For use with the To Dos app from the Apple app store using Apple's sandbox APNS server. The Apple server port number to which the feedback requests should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default value is 3 |
For use with the To Dos app from the Apple app store using Apple's sandbox APNS server. The number of retries to attempt when sending an APNS message before giving up and returning an error. Min 1, Max 15. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default value is blank. |
Specifies the password used to authenticate with the proxy for the To Dos app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default value is |
Specifies the port number used to authenticate with the proxy for the To Dos app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default value is blank. |
Specifies the host name used to authenticate with the proxy for the To Dos app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default value is |
Specifies the port type on which the proxy is listening for the proxy for the To Dos app signed with the development certificate. At this time, only HTTP is supported. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default value is blank. |
Specifies the user name on which the proxy is listening for the proxy for the To Dos app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default value is |
For use with the To Dos app from the Apple app store using Apple's sandbox APNS server. The Apple server to which the APNS message should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default value is 15 |
For use with the To Dos app from the Apple app store using Apple's sandbox APNS server. The number of concurrent persistent connections to the APNS server (min is 1, max is 15). For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_TODO_PRODUCTION_ |
Default value is |
For use with the To Dos app from the Apple app store using Apple's sandbox APNS server. The Apple server port number to which the APNS message should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_ |
Default value is blank |
For use with the IBM Verse app with Citrix from the Apple app store using Apple's production APNS server. This would be used to change the built-in p12 file name to a custom p12 file. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_PRODUCTION_ |
Default value is blank |
For use with the IBM Verse app with Citrix from the Apple app store using Apple's production APNS server. This would be used to change the password associated with the p12 file. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_ |
Default value is |
For use with the IBM Verse app with Citrix from the Apple app store using Apple's production APNS server. How often, in minutes, to check the Apple feedback service for APNS tokens that have been revoked. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_PRODUCTION_ |
Default value is |
For use with the IBM Verse app with Citrix from the Apple app store using Apple's production APNS server. The Apple server to which the feedback requests should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_PRODUCTION_ |
Default value is |
For use with the IBM Verse app with Citrix from the Apple app store using Apple's production APNS server. The Apple server port number to which the feedback requests should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_PRODUCTION_ |
Default value is 3 |
For use with the IBM Verse app with Citrix from the Apple app store using Apple's production APNS server. The number of retries to attempt when sending an APNS message before giving up and returning an error. Min 1, Max 15. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_PRODUCTION_ |
Default value is blank. |
Specifies the password used to authenticate with the proxy for the IBM Verse with Citrix app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_PRODUCTION_ |
Default value is |
Specifies the port number used to authenticate with the proxy for the IBM Verse with Citrix app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_PRODUCTION_ |
Default value is blank. |
Specifies the host name used to authenticate with the proxy for the IBM Verse with Citrix app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_PRODUCTION_ |
Default value is |
Specifies the port type on which the proxy is listening for the proxy for the IBM Verse with Citrix app signed with the development certificate. At this time, only HTTP is supported. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_PRODUCTION_ |
Default value is blank. |
Specifies the user name on which the proxy is listening for the proxy for the IBM Verse with Citrix app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_PRODUCTION_SERVER |
Default value is |
For use with the IBM Verse app with Citrix from the Apple app store using Apple's production APNS server. The Apple server to which the APNS message should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_PRODUCTION_ |
Default value is 15 |
For use with the IBM Verse app with Citrix from the Apple app store using Apple's production APNS server. The number of concurrent persistent connections to the APNS server (min is 1, max is 15). For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_PRODUCTION_ |
Default value is |
For use with the IBM Verse app with Citrix from the Apple app store using Apple's production APNS server. The Apple server port number to which the APNS message should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_PRODUCTION_ |
Default value is blank |
For use with the IBM Verse app with Citrix from the Apple app store using Apple's sandbox APNS server. This would be used to change the built-in p12 file name to a custom p12 file. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_PRODUCTION_ |
Default value is blank |
For use with the IBM Verse app with Citrix from the Apple app store using Apple's sandbox APNS server. This would be used to change the password associated with the p12 file. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_PRODUCTION_ |
Default value is |
For use with the IBM Verse app with Citrix from the Apple app store using Apple's sandbox APNS server. How often, in minutes, to check the Apple feedback service for APNS tokens that have been revoked. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_PRODUCTION_ |
Default value is |
For use with the IBM Verse app with Citrix from the Apple app store using Apple's sandbox APNS server. The Apple server to which the feedback requests should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_PRODUCTION_ |
Default value is |
For use with the IBM Verse app with Citrix from the Apple app store using Apple's sandbox APNS server. The Apple server port number to which the feedback requests should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_PRODUCTION_ |
Default value is 3 |
For use with the IBM Verse app with Citrix from the Apple app store using Apple's sandbox APNS server. The number of retries to attempt when sending an APNS message before giving up and returning an error. Min 1, Max 15. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_PRODUCTION_ |
Default value is blank. |
Specifies the password used to authenticate with the proxy for the IBM Verse with Citrix app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_PRODUCTION_ |
Default value is |
Specifies the port number used to authenticate with the proxy for the IBM Verse with Citrix app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_PRODUCTION_ |
Default value is blank. |
Specifies the host name used to authenticate with the proxy for the IBM Verse with Citrix app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_PRODUCTION_ |
Default value is |
Specifies the port type on which the proxy is listening for the proxy for the IBM Verse with Citrix app signed with the development certificate. At this time, only HTTP is supported. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_PRODUCTION_ |
Default value is blank. |
Specifies the user name on which the proxy is listening for the proxy for the IBM Verse with Citrix app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_PRODUCTION_ |
Default value is |
For use with the IBM Verse app with Citrix from the Apple app store using Apple's sandbox APNS server. The Apple server to which the APNS message should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_PRODUCTION_ |
Default value is 15 |
For use with the IBM Verse app with Citrix from the Apple app store using Apple's sandbox APNS server. The number of concurrent persistent connections to the APNS server (min is 1, max is 15) For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_CITRIX_PRODUCTION_ |
Default value is |
For use with the IBM Verse app from the Apple app store using Apple's sandbox APNS server. The Apple server port number to which the APNS message should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is blank |
For use with the IBM Verse app from the Apple app store using Apple's production APNS server. This would be used to change the built-in p12 file name to a custom p12 file. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is blank |
For use with the IBM Verse app from the Apple app store using Apple's production APNS server. This would be used to change the password associated with the p12 file. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is |
For use with the IBM Verse app from the Apple app store using Apple's production APNS server. How often, in minutes, to check the Apple feedback service for APNS tokens that have been revoked. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is |
For use with the IBM Verse app from the Apple app store using Apple's production APNS server. The Apple server to which the feedback requests should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is |
For use with the IBM Verse app from the Apple app store using Apple's production APNS server. The Apple server port number to which the feedback requests should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is 3 |
For use with the IBM Verse app from the Apple app store using Apple's production APNS server. The number of retries to attempt when sending an APNS message before giving up and returning an error. Min 1, Max 15. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is blank. |
Specifies the password used to authenticate with the proxy for the IBM Verse app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is |
Specifies the port number used to authenticate with the proxy for the IBM Verse app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is blank. |
Specifies the host name used to authenticate with the proxy for the IBM Verse app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is |
Specifies the port type on which the proxy is listening for the proxy for the IBM Verse app signed with the development certificate. At this time, only HTTP is supported. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is blank. |
Specifies the user name on which the proxy is listening for the proxy for the IBM Verse app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is |
For use with the IBM Verse app from the Apple app store using Apple's production APNS server. The Apple server to which the APNS message should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is 15 |
For use with the IBM Verse app from the Apple app store using Apple's production APNS server. The number of concurrent persistent connections to the APNS server (min is 1, max is 15). For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is |
For use with the IBM Verse app from the Apple app store using Apple's production APNS server. The Apple server port number to which the APNS message should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is blank |
For use with the IBM Verse app from the Apple app store using Apple's sandbox APNS server. This would be used to change the built-in p12 file name to a custom p12 file. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is blank |
For use with the IBM Verse app from the Apple app store using Apple's sandbox APNS server. This would be used to change the password associated with the p12 file. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is |
For use with the IBM Verse app from the Apple app store using Apple's sandbox APNS server. How often, in minutes, to check the Apple feedback service for APNS tokens that have been revoked. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is |
For use with the IBM Verse app from the Apple app store using Apple's sandbox APNS server. The Apple server to which the feedback requests should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is |
For use with the IBM Verse app from the Apple app store using Apple's sandbox APNS server. The Apple server port number to which the feedback requests should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is 3 |
For use with the IBM Verse app from the Apple app store using Apple's sandbox APNS server. The number of retries to attempt when sending an APNS message before giving up and returning an error. Min 1, Max 15. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is blank. |
Specifies the password used to authenticate with the proxy for the IBM Verse app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is |
Specifies the port number used to authenticate with the proxy for the IBM Verse app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is blank. |
Specifies the host name used to authenticate with the proxy for the IBM Verse app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is |
Specifies the port type on which the proxy is listening for the proxy for the IBM Verse app signed with the development certificate. At this time, only HTTP is supported. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is blank. |
Specifies the user name on which the proxy is listening for the proxy for the IBM Verse app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is |
For use with the IBM Verse app from the Apple app store using Apple's sandbox APNS server. The Apple server to which the APNS message should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is 15 |
For use with the IBM Verse app from the Apple app store using Apple's sandbox APNS server. The number of concurrent persistent connections to the APNS server (min is 1, max is 15). For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_APPLE_VERSE_IBM_PRODUCTION_ |
Default value is |
For use with the IBM Verse app from the Apple app store using Apple's sandbox APNS server. The Apple server port number to which the APNS message should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_DEVELOPMENT_KEYSTORE |
Default value is blank |
For use with the MaaS360 app signed with the development certificate. This would be used to change the built-in p12 file name to a custom p12 file. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_DEVELOPMENT_KEYSTORE_ |
Default value is blank |
For use with the MaaS360 app signed with the development certificate. This would be used to change the password associated with the p12 file. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_DEVELOPMENT_ |
Default value is |
For use with the MaaS360 app signed with the development certificate. How often, in minutes, to check the Apple feedback service for APNS tokens that have been revoked. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_DEVELOPMENT_ |
Default value is |
For use with the MaaS360 app signed with the development certificate. The Apple server to which the feedback requests should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_DEVELOPMENT_ |
Default value is |
For use with the MaaS360 app signed with the development certificate. The Apple server port number to which the feedback requests should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_DEVELOPMENT_ |
Default value is 3 |
For use with the MaaS360 app signed with the development certificate. The number of retries to attempt when sending an APNS message before giving up and returning an error. Min 1, Max 15. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_DEVELOPMENT_ |
Default value is blank. |
Specifies the password used to authenticate with the proxy for the MaaS360 app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_DEVELOPMENT_ |
Default value is |
Specifies the port number used to authenticate with the proxy for the MaaS360 app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_DEVELOPMENT_ |
Default value is blank. |
Specifies the host name used to authenticate with the proxy for the MaaS360 app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_DEVELOPMENT_ |
Default value is |
Specifies the port type on which the proxy is listening for the proxy for the MaaS360 app signed with the development certificate. At this time, only HTTP is supported. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_DEVELOPMENT_ |
Default value is blank. |
Specifies the user name on which the proxy is listening for the proxy for the MaaS360 app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_DEVELOPMENT_ |
Default value is |
For use with the MaaS360 app signed with the development certificate. The Apple server to which the APNS message should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_DEVELOPMENT_ |
Default value is 15 |
For use with the MaaS360 app signed with the development certificate. The number of concurrent persistent connections to the APNS server (min is 1, max is 15). For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_DEVELOPMENT_ |
Default value is |
For use with the MaaS360 app signed with the development certificate. The Apple server port number to which the APNS message should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_PRODUCTION_ |
Default value is blank |
For use with the MaaS360 app from the Apple app store using MaaS360's production APNS server. This would be used to change the built-in p12 file name to a custom p12 file. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_PRODUCTION_ |
Default value is blank |
For use with the MaaS360 app from the Apple app store using MaaS360's production APNS server. This would be used to change the password associated with the p12 file. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_PRODUCTION_ |
Default value is |
For use with the MaaS360 app from the Apple app store using MaaS360's production APNS server. How often, in minutes, to check the Apple feedback service for APNS tokens that have been revoked. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_PRODUCTION_ |
Default value is |
For use with the MaaS360 app from the Apple app store using MaaS360's production APNS server. The Apple server to which the feedback requests should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_PRODUCTION_ |
Default value is |
For use with the MaaS360 app from the Apple app store using MaaS360's production APNS server. The Apple server port number to which the feedback requests should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_PRODUCTION_ |
Default value is 3 |
For use with the MaaS360 app from the Apple app store using MaaS360's production APNS server. The number of retries to attempt when sending an APNS message before giving up and returning an error. Min 1, Max 15. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_PRODUCTION_ |
Default value is blank. |
Specifies the password used to authenticate with the proxy for the MaaS360 app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_PRODUCTION_ |
Default value is |
Specifies the port number used to authenticate with the proxy for the MaaS360 app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_PRODUCTION_ |
Default value is blank. |
Specifies the host name used to authenticate with the proxy for the MaaS360 app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_PRODUCTION_ |
Default value is |
Specifies the port type on which the proxy is listening for the proxy for the MaaS360 app signed with the development certificate. At this time, only HTTP is supported. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_PRODUCTION_ |
Default value is blank. |
Specifies the user name on which the proxy is listening for the proxy for the MaaS360 app signed with the development certificate. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_PRODUCTION_ |
Default value is |
For use with the MaaS360 app from the Apple app store using MaaS360's production APNS server. The Apple server to which the APNS message should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_PRODUCTION_ |
Default value is 15 |
For use with the MaaS360 app from the Apple app store using MaaS360's production APNS server. The number of concurrent persistent connections to the APNS server (min is 1, max is 15). For more information, refer to Push messaging through a proxy. |
NTS_PUSH_APNS_MAAS360_PRODUCTION_ |
Default value is |
For use with the MaaS360 app from the Apple app store using MaaS360's production APNS server. The Apple server port number to which the APNS message should be sent. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_CHANGEDDB_MINIMUM_ |
Default value is 323 |
Specifies the minimum level of Domino® needed to allow
Domino® API For more information, refer to Push messaging through a proxy. |
NTS_PUSH_ENABLE_APNS_APPLE_TODO_ |
Default value is False |
If set to |
NTS_PUSH_ENABLE_APNS_APPLE_TODO_ |
Default value is False |
If set to |
NTS_PUSH_ENABLE_APNS_APPLE_TODO_ |
Default value is True |
If set to |
NTS_PUSH_ENABLE_APNS_APPLE_TODO_ |
Default value is False |
If set to |
NTS_PUSH_ENABLE_APNS_APPLE_VERSE_ |
Default value is False |
If set to |
NTS_PUSH_ENABLE_APNS_APPLE_VERSE_ |
Default value is False |
If set to |
NTS_PUSH_ENABLE_APNS_APPLE_VERSE_ |
Default value is False |
If set to |
NTS_PUSH_ENABLE_APNS_APPLE_VERSE_ |
Default value is False |
If set to |
NTS_PUSH_ENABLE_APNS_APPLE_VERSE_ |
Default value is False |
If set to |
NTS_PUSH_ENABLE_APNS_APPLE_VERSE_ |
Default value is False |
If set to |
NTS_PUSH_ENABLE_APNS_APPLE_VERSE_ |
Default value is True |
If set to |
NTS_PUSH_ENABLE_APNS_APPLE_VERSE_ |
Default value is False |
If set to |
NTS_PUSH_ENABLE_APNS_MAAS360_ |
Default value is False |
If set to |
NTS_PUSH_ENABLE_APNS_MAAS360_ |
Default value is False |
If set to |
NTS_PUSH_ENABLE_ FCM |
Default value is True |
If set to |
NTS_PUSH_ENABLE_GCM |
Default value is True |
If set to |
NTS_PUSH_ENABLE_HTTP |
Default value is True |
If set to |
NTS_PUSH_ENABLE_SMS |
Default value is True |
If set to |
NTS_PUSH_ENABLE_TCP |
Default value is True |
If set to |
NTS_PUSH_FCM_MAX_RETRIES |
Default value is 3 |
For use with the IBM Traveler app for Android using Google's FCM server. The number of retries to attempt when sending an APNS message before giving up and returning an error. Min 1, Max 15. For more information, refer to Push messaging through a proxy |
NTS_PUSH_FCM_PROXY_CONNECT_ |
Default value is |
The timeout in seconds to establish a connection with the Proxy Server. |
NTS_PUSH_FCM_PROXY_CONNECTION_ |
Default value is |
The timeout in seconds used when requesting a connection from the connection manager/pool. |
NTS_PUSH_FCM_PROXY_MAX_POOLED_ |
Default value is 10 |
The maximum total connections in the pooling HTTP client connection manager. |
NTS_PUSH_FCM_PROXY_PASSWORD |
Default value is blank |
Specifies the password used to authenticate with the proxy for the IBM Traveler app for Android using Google's FCM server. For more information, refer to Push messaging through a proxy |
NTS_PUSH_FCM_PROXY_PORT |
Default value is 0 |
Specifies the port number used to authenticate with the proxy for the IBM Traveler app for Android using Google's FCM server. For more information, refer to Push messaging through a proxy |
NTS_PUSH_FCM_PROXY_SERVER |
Default value is blank |
Specifies the host name used to authenticate with the proxy for the IBM Traveler app for Android using Google's FCM server. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_FCM_SERVER_URL |
Default value is |
The URL of the FCM server. |
NTS_PUSH_FCM_PROXY_SOCKET_ |
Default value is 300 |
The socket timeout in seconds, which is the timeout for waiting for data (for instance, a maximum period inactivity between two consecutive data packets). |
NTS_PUSH_FCM_PROXY_TYPE |
Default value is HTTP |
Specifies the port type on which the proxy is listening for the proxy for the IBM Traveler app for Android using Google's FCM server. At this time, only HTTP is supported. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_FCM_PROXY_USER |
Default value is blank |
Specifies the user name on which the proxy is listening for the proxy for the IBM Traveler app for Android using Google's FCM server. For more information, refer to Push messaging through a proxy |
NTS_PUSH_GCM_MAX_RETRIES |
Default value is 3 |
For use with the IBM Traveler app for Android using Google's GCM server. The number of retries to attempt when sending an APNS message before giving up and returning an error. Min 1, Max 15. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_GCM_PROXY_CONNECT_ |
Default value is |
The timeout in seconds to establish a connection with the Proxy Server. |
NTS_PUSH_GCM_PROXY_CONNECTION_ |
Default value is |
The timeout in seconds used when requesting a connection from the connection manager/pool. |
NTS_PUSH_GCM_PROXY_MAX_ |
Default value is 10 |
The maximum total connections in the pooling HTTP client connection manager. |
NTS_PUSH_GCM_PROXY_PASSWORD |
Default value is blank. |
Specifies the password used to authenticate with the proxy for the IBM Traveler app for Android using Google's GCM server. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_GCM_PROXY_PORT |
Default value is |
Specifies the port number used to authenticate with the proxy for the IBM Traveler app for Android using Google's GCM server. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_GCM_PROXY_SERVER |
Default value is blank. |
Specifies the host name used to authenticate with the proxy for the IBM Traveler app for Android using Google's GCM server. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_GCM_SERVER_URL |
Default value is |
The URL of the GCM server. |
NTS_PUSH_GCM_PROXY_SOCKET_TIMEOUT |
Default value is |
The socket timeout in seconds, which is the timeout for waiting for data (for instance, a maximum period inactivity between two consecutive data packets). |
NTS_PUSH_GCM_PROXY_TYPE |
Default value is |
Specifies the port type on which the proxy is listening for the proxy for the IBM Traveler app for Android using Google's GCM server. At this time, only HTTP is supported. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_GCM_PROXY_USER |
Default value is blank. |
Specifies the user name on which the proxy is listening for the proxy for the IBM Traveler app for Android using Google's GCM server. For more information, refer to Push messaging through a proxy. |
NTS_PUSH_READ_CHANGES_ |
Default is false. | Whether to push read-only changes from the server to devices immediately or wait for there to be other push changes before including the read changes in the push message. By not pushing read-only changes immediately, the devices sync less often thereby increasing battery life. If there are any other changes such as new, updated, moved or deleted changes, they will be pushed immediately along with the read changes. This configuration is only for the push flows from the server to the device, so if the device syncs for any reason, the read changes will be included in the sync regardless of any push flows having been done or not. |
NTS_PUSH_ROUTE_GCM_TO_FCM |
Default is true | Default, true, sends messages for GCM registered devices through the FCM servers (as the tokens are interchangeable) |
NTS_READ_PLAINTEXT_BODY_FOR_ |
Default is true | Default, true, allows Traveler to process emails with body fields of type TYPE_TEXT and TYPE_TEXT_LIST. |
NTS_REQUEST_VALIDATION_ALLOWED_ |
Default value is blank. |
For security protection, Traveler rejects all form-based (multipart/form-data) requests that have unknown parameters. If something is intentionally inserting additional parameters into the form (such as for tracking purposes), the customer may define this regular expression so that Traveler will allow the request if the unknown parameter matches the regular expression. |
NTS_SENDMAIL_DUPLICATE_ACTION |
Default value is |
When mail that is in the process of being sent is determined to have already previously been
sent, based on the content of the message (see Apple bug 15691826), |
NTS_SENDMAIL_SAVE_OPTIONS |
The default value is an empty string, which behaves the same as the |
Valid values are:
|
NTS_SERVER_LANG |
Set to the language for the locale in use during the installation of IBM Traveler server. |
The language to use for the IBM Traveler server. This setting does not affect any of the behavior of the server. It is used to set the default language for messages displayed on the devices if a preferred language is not set in the device profile. |
NTS_SERVLET_ALLOW_CLIENT_INSTALL |
Set to |
Controls whether the client installation and configuration parts of the servlet page are shown.
This parameter is similar to a master switch for enabling or disabling these portions of the servlet
page for all device types. If this parameter is set to |
NTS_SERVLET_ALLOW_CLIENT_ |
Default value is |
If |
NTS_SERVLET_ALLOW_CLIENT_ |
Default value is |
Link to the app store (GooglePlay) from the user home page for downloading the client. Only
applicable if |
NTS_SERVLET_ALLOW_CLIENT_INSTALL_ |
Default value is |
Link to this server from the user home page for downloading the client. Only applicable if
|
NTS_SERVLET_ALLOW_CLIENT_INSTALL_ |
Default value is |
If |
NTS_SERVLET_ALLOW_CLIENT_INSTALL_ |
Default value is |
If |
NTS_SERVLET_ALLOW_CLIENT_ |
Default value is |
Set to |
NTS_SERVLET_ALLOW_CLIENT_ |
Default value is |
Set to |
NTS_SERVLET_ALLOW_DELETE_IDFILE |
Default value is |
If enabled, users are able to delete their IBM® Notes® ID from their mail database using the IBM Traveler Notes® ID management web page. |
NTS_SERVLET_ALLOW_MANAGE_NOTES_ID |
Default value is |
Controls whether the Manage the Notes® ID section of the servlet page is shown. |
NTS_SERVLET_ALLOW_USER_COMMANDS |
Default value is |
Controls whether the Execute Commands section of the servlet page is shown for Notes® users that do not have administrative access rights. |
NTS_SERVLET_ALLOW_USER_ |
Default value is |
Controls whether the Manage Security part of the servlet page is shown. If enabled, users can manage their own devices for wipe requests and other related security actions. A system administrator can always perform these operations on the server. This controls whether the users can do the actions themselves. |
NTS_SERVLET_ALLOW_REPORT_ |
Default value is |
Controls whether the problem report part of the servlet page is shown. |
NTS_SERVLET_WEB_FOOTER_INCLUDES_ |
Default value is |
Controls whether the server information is included in the footer of the servlet page. |
NTS_SSL |
Default value is |
This parameter controls whether IBM Traveler server uses secure sockets for interprocess
communication between the server and the servlet or for inter-server communication between servers
in an HA pool. If this value is set to true, the |
NTS_SSL_KEYSTORE |
Default value is the empty string. |
This parameter specifies the fully qualified file name for the IBM Traveler server to use for the
Java™ key store ( |
NTS_STATS_CALCULATION_TIME |
Default value is 60. |
Sets the amount of time between each update of the StatsCalculationManager. |
NTS_STATUS_CONSTRAINT_ERROR_ |
The default is 60. |
If the IBM Traveler server is in a constrained state for longer than this value, the status will be changed to red. See Constraint processing for more details. |
NTS_STATUS_CPU_PCT_YELLOW_ |
The default value is 70 |
Yellow CPU percentage threshold. |
NTS_STATUS_CPU_PCT_RED_ |
The default value is 90 |
Red CPU percentage threshold. |
NTS_STATUS_DERBY_QUERY_ |
The default value is 1. |
Used to determine when a defrag is needed on derby database installations. All of the
For The default value is 1 because any query over one second will be counted as over the threshold. |
NTS_STATUS_DERBY_QUERY_PCT_ |
The default value is 5. |
The range is 0 to 99 and must be greater than
|
NTS_STATUS_DERBY_QUERY_PCT_ |
The default value is 1. |
The range is 0 to 99 and must be less than
|
NTS_STATUS_DERBY_UNFILLED_ |
The default value is 4000. |
The number of unfilled pages. Must be greater than
|
NTS_STATUS_DERBY_UNFILLED_ |
The default value is 2000. |
The number of unfilled pages. Must be less than
|
NTS_STATUS_DATA_DIR_FREE_ |
The default value is 5. |
Domino® data directory free space red threshold. If the Domino® data directory free disk space falls to less than this number of gigabytes, the server status will be changed to red. |
NTS_STATUS_DATA_DIR_FREE_ |
The default value is 10. |
Domino® data directory free space yellow threshold. If the Domino® data directory free disk space falls to less than this number of gigabytes, the server status will be changed to yellow. |
NTS_STATUS_DB_OPEN_INTERVAL_ |
The default value is 2 |
Lower time limit interval index to open Databases in
|
NTS_STATUS_DATA_DIR_FREE_ |
The default is 15. |
Domino® data directory free space yellow threshold. |
NTS_STATUS_DATA_DIR_FREE_ |
The default value is 5. |
Domino® data directory free space yellow threshold. If the percentage of free disk space on the disk containing the Domino® data directory falls to less than this value, the server status will be changed to red. |
NTS_STATUS_DB_OPEN_INTEVAL_ |
The default value is 8 |
Upper time limit interval index to open Databases
|
NTS_STATUS_DB_OPEN_PCT_ |
The default value is 5 |
Percentage over the |
NTS_STATUS_DB_OPEN_PCT_ |
The default value is 10 |
Percentage over the |
NTS_STATUS_DS_FAILURE_ |
The default value is 5 |
Percentage of threads failing with a 503 error message to be considered in Yellow state. |
NTS_STATUS_DS_FAILURE_ |
The default value is 10 |
Percentage of threads failing with a 503 error message to be considered in Red state |
NTS_STATUS_DS_FAILURE_NON_ |
The default value is 5 |
Percentage threads failing with a non-503 error message to be considered in Yellow state |
NTS_STATUS_DS_FAILURE_NON_ |
The default value is 10 |
Percentage threads failing with a non-503 error message to be considered in Red state |
NTS_STATUS_ERROR_COUNT_ |
The default value is 50 |
For each user, if their error count is greater than this value, the status will be set to Yellow. |
NTS_STATUS_ERROR_COUNT_ |
The default value is 100 |
For each user, if their error count is greater than this value, their status will be set to Red. |
NTS_STATUS_HTTP_THREAD_ |
The default value is 80 |
If the peak HTTP thread usage is greater than this limit, the status will be set to Yellow |
NTS_STATUS_HTTP_THREAD_ |
The default value is 90 |
If the peak HTTP thread usage is greater than this limit, the status will be set to Red. |
NTS_STATUS_IPC_DELAY_TIME_ |
The default value is 95. |
The IBM Traveler server tracks the communication delay between itself and the servlet. The "bucket" representing the greatest delay is for messages taking ten seconds or longer. If the percentage of messages in the rest of the buckets falls to less than this value, the server status will turn to yellow. In other words, in the default case, this case is the same as the number of messages falling into the longest bucket becoming greater than five percent. |
NTS_STATUS_MEMORY_JAVA_ |
The default value is 75 |
Yellow Java™ memory percentage threshold. |
NTS_STATUS_MEMORY_JAVA_ |
The default value is 85 |
Red Java™ memory percentage threshold. |
NTS_STATUS_MEMORY_NATIVE_ |
The default value is 85 |
Yellow native memory percentage threshold . |
NTS_STATUS_MEMORY_NATIVE_ |
The default value is 95 |
Red native memory percentage threshold. |
NTS_STATUS_LOG_DIR_FREE_ |
The default value is 5. |
IBM Traveler log directory free space red threshold. If the IBM Traveler log directory free disk space falls to less than this number of gigabytes, the server status will be changed to red. |
NTS_STATUS_DATA_DIR_FREE_ |
The default value is 10 |
IBM Traveler log directory free space yellow threshold. If the IBM Traveler log directory free disk space falls to less than this number of gigabytes, the server status will be changed to yellow. |
NTS_STATUS_LOG_DIR_FREE_ |
The default value is 15. |
IBM Traveler server log directory free space yellow threshold. |
NTS_STATUS_LOG_DIR_FREE_ |
The default value is 5. |
IBM Traveler server log directory free space red threshold. If the percentage of free disk space on the disk containing the IBM Traveler log directory falls to less than this value, the server status will be changed to red. This property only has effect if the log directory has been reconfigured (see NTS_LOGGING_HOME) so that it is no longer a subdirectory of the Domino® data directory. |
NTS_STATUS_MEMORY_EXIT_ |
The default value is 5. |
This property provides some elasticity to the Java™ and native memory thresholds. This value is the percentage smaller than the threshold that the memory must fall before the status changes from red to yellow or from yellow to green. |
NTS_STATUS_SSL_CERT_EXPIRATION_ |
The default value is 30. |
SSL certificate expiration yellow threshold. |
NTS_STATUS_SSL_CERT_EXPIRATION_ |
The default value is 7. |
SSL certificate expiration red threshold if the IBM Traveler server is configured to use secure server to server communications. If the SSL certificate used for secure communication has an expiration date that falls within this threshold in days, the server status will be red. |
NTS_STATUS_THREAD_MAX_ |
The default value is 30 |
If a thread runs longer than this number of minutes, the state will be consider to be Yellow. |
NTS_STATUS_THREAD_MAX_ |
The default value is 120 |
If a thread runs longer than this number of minutes, the state will be consider to be Red. |
NTS_TEMPLATE_INSTALL |
Set to |
When this parameter is set to |
NTS_THREADS_ADMINQ |
The default value is 3. |
Used internally for managing the admin data. This should not need to be changed. |
NTS_THREADS_ALARM |
The default value is 20. |
Used internally for operations that need to take place on a timed basis. This should not need to be changed. |
NTS_THREADS_DELAY_QUEUE |
The default value is 50. |
Used internally for operations that need to run at a certain time relative to now. This should not need to be changed. |
NTS_THREADS_DEVICESYNC |
The default value is 5000. |
Syncs data between Domino mail servers and user devices. |
NTS_THREADS_MINIMAL_ |
The default value is 10 |
The number of Device Synch threads allowed to run when in constraint state. |
NTS_THREADS_MINIMAL_ |
The default value is 5 |
The number of Prime Synch threads allowed to run when in constraint state. |
NTS_THREADS_MISC |
The default value is 5000. |
Used when none of the other categories apply. This should not need to be changed. |
NTS_THREADS_MONITOR |
The default value is 5000. |
Used for monitoring the user's mail database for changes as part of the push process. There is one thread per mail server, so you need at least enough for the number of mail servers this server will communicate with, but normally the default is more than enough. This should not need to be changed. |
NTS_THREADS_PRIMESYNC |
The default value is 200. |
Determines if changes to user mail files must be synced to user devices. |
NTS_THREADS_PUSH |
The default value is 200. |
Used for active handling of push messages. Most of the time, push messages are inactive while they wait for changes that need to be pushed. As a result, a large number of threads are not required, even if there are many devices using on the system using push. This should not need to be changed. |
NTS_THREADS_TELL_COMMAND |
The default value is 50. |
Used for processing tell commands. This should not need to be changed. |
NTS_THREADS_VALIDATE_CLUSTER |
The default value is 20. |
Used for checking cluster information regarding the user's mail file and replicas. This should not need to be changed. |
NTS_THREADS_WORKER_DEVICE |
The default value is 500. |
Used internally to handle device requests including configuration, push and syncing. |
NTS_THREADS_WORKER_SYSTEM |
The default value is 5000. |
Used internally to handle all incoming requests including inter-server and inter-process communication. Actions associated with a device will be passed to a worker device thread. Other actions will be processed on the worker system thread itself. |
NTS_TRAVELER_AS_LOOKUP_SERVER |
The default value is |
If set to |
NTS_TRAVELER_URI_REQUEST_ |
The default value is
|
Regular expression that matches all valid HTTP request URIs. |
NTS_USER_AGENT_ALLOWED_ |
Default value is |
This parameter sets whether Android clients are allowed to sync with the IBM Traveler server. |
NTS_USER_AGENT_ALLOWED_ |
Default value is |
This parameter sets whether Apple clients are allowed to synch with this IBM Traveler server. If
this parameter is set to |
NTS_USER_AGENT_ALLOWED_BB |
Default value is |
This parameter sets whether BlackBerry clients are allowed to sync with the IBM Traveler server. |
NTS_USER_AGENT_ALLOWED_ |
Default value is |
This parameter sets whether IBM Verse on Apple iOS clients are allowed to synch with this IBM
Traveler server. If this parameter is set to |
NTS_USER_AGENT_ALLOWED_ |
Default value is |
This parameter sets whether MaaS360 Android clients are allowed to sync with the IBM Traveler server. |
NTS_USER_AGENT_ALLOWED_ |
Default value is |
This parameter sets whether MaaS360 Apple iOS clients are allowed to sync with the IBM Traveler server. |
NTS_USER_AGENT_ALLOWED_ |
Default value is |
This parameter sets whether MaaS360 Windows Phone clients are allowed to sync with the IBM Traveler server. |
NTS_USER_AGENT_ALLOWED_ |
Default value is |
This parameter sets whether Nokia clients are allowed to synchronize with this IBM Traveler
server. If this parameter is set to |
NTS_USER_AGENT_ALLOWED_ |
Default value is '*'. |
This parameter provides for a regular expression to control which clients are allowed to
synchronize with the IBM Traveler server.
Note: NTS_USER_AGENT_ALLOWED_REGEX is
checked after the other NTS_USER_AGENT values for known device types. As a result,
these must pass and this regular expression must be allowed. For devices that do not match any of
the known device types, this will be the only check made. This value is the regular expression for
User-Agent HTTP headers that are allowed to sync data. The default is
".* ", which allows all devices to sync. For the known device types, both checks
must pass, which means if a value of "Apple" is used instead of ".*", only Apple devices would be
allowed to sync, even if NTS_USER_AGENT_ALLOWED_BB=true was also used. |
NTS_USER_AGENT_ALLOWED_ |
Default value is |
This parameter sets whether SecurePIM clients are allowed to sync with the IBM Traveler server. |
NTS_USER_AGENT_ALLOWED_ |
Default value is |
This parameter sets whether Microsoft™ Windows™ 8 Desktop clients are allowed to sync with the IBM Traveler server. |
NTS_USER_AGENT_ALLOWED_ |
Default value is |
This parameter sets whether Microsoft™ Windows™ Phone clients are allowed to sync with the IBM Traveler server. |
NTS_USER_AGENT_ALLOWED_ |
Default is value |
This parameter sets whether Microsoft™ Windows™ 10 Mobile clients are allowed to sync with the IBM Traveler server. The first check is run against |
NTS_USER_AGENT_ALLOWED_ |
Default value is |
This parameter sets whether Microsoft™ RT Tablet clients are allowed to sync with the IBM Traveler server. |
NTS_USER_AGENT_ALLOWED_WM |
Default value is |
This parameter sets whether Windows™ Mobile clients are
allowed to synchronize with this IBM Traveler server.If this parameter is set to
|
NTS_USER_EMAIL_LIMIT |
Unlimited |
Messages older than the mail filter limit will not be synced with the device. |
NTS_USER_EVENTS_LIMIT |
Unlimited |
Calendar events that occur beyond the events filter limit will not be synced with the device. Note that recurring events that have an instance within the filter window will be synced, even if they have instances that occur beyond the future events filter limit. |
NTS_USER_ID_ALLOWED_REGEX |
Default value is ".*". |
This regular expression controls which Notes® users are allowed to access the IBM Traveler server. The default value is the regular expression wildcard for all users. |
NTS_USER_ID_DENIED_REGEX |
Default value is the empty string. |
This regular expression controls which Notes® users are
not allowed to access the IBM Traveler server. The default value of an empty string means that no
users will be denied. If the regular expressions for |
NTS_USER_NOTES_LIMIT |
Unlimited |
Journal entries modified earlier than this limit will not be synced to mobile devices that support Journal sync. |
NTS_USER_SESSION |
|
This enables the Run As User feature. When true (enabled), the Traveler server accesses a user's
mail file as the user ID instead of the server ID. This feature resolves several long-standing
issues with accessing the user's data as the server ID, including:
|
NTS_USER_SESSION_OVERRIDE_ |
Default value is |
When the Run As User feature is enabled (set to true), Traveler's access to the user's mail file is subject to the restrictions configured in the ACL (Access Control List) of the user's mail file. One setting in particular, "Maximum Internet name and password," can restrict access for Traveler to a level that prevents the user's devices from syncing, even if the Basic Access level for the user is Editor or higher. When this parameter is enabled (set to true), Traveler accesses the user's mail file with the server ID instead of the user ID (thus overriding the Run As User function for this user), provided that the "Maximum Internet name and password" ACL value is set lower than Editor. This allows such users to sync their mobile devices, but at the expense of the other Run As User benefits. |
NTS_USERCACHE_ENABLED |
Default value is |
Whether or not the user cache is enabled. See Name lookup for more information on the user cache. |
NTS_USERCACHE_EXPINTERVAL |
Default value is 30 minutes |
How often to check for expired (based on |
NTS_USERCACHE_LIFETIME |
Default value is 240 minutes. |
How long an item is allowed in the cache until it becomes eligible for deletion. |
NTS_VCARD_LOOKUP |
Default value is |
Determines whether or not a contact should be automatically looked up for additional addresses and have these addresses included with a personal contact when it syncs from the server to the device. These additional addresses can help better identify the contact which can lead to better data and visual integration on the device. |
NTS_WEBSITE_HOME |
Set to /traveler if Set User Home Page as default website for this server was selected during installation. |
If NTS_WEBSITE_HOME is set, during startup the IBM Traveler server uses the
value specified to set the home URL for the HTTP server. The value set by default for the
installation is |
Some of the notes.ini
parameters have been renamed from previous versions of IBM
Traveler. In most cases, the parameters were renamed to make the naming more consistent and easier
for administrators to understand. When the server starts, it scans notes.ini
for
any renamed parameters. Parameters that are found will have the parameter name changed to the new
name. The parameter value assigned in notes.ini
will be preserved.
Old name | New name |
---|---|
NTS_ALLOWED_USER_AGENT_REGEX | NTS_USER_AGENT_ALLOWED_REGEX |
NTS_ALLOWED_USER_ID_REGEX | NTS_USER_ID_ALLOWED_REGEX |
NTS_BAN_DOC_DUMP | NTS_BANNED_DOC_DUMP |
NTS_BAN_DOC_LIMIT | NTS_BANNED_DOC_LIMIT |
NTS_BAN_DOC_SYNCS | NTS_BANNED_DOC_SYNCS |
NTS_DENIED_USER_ID_REGEX | NTS_USER_ID_DENIED_REGEX |
NTS_ENABLE_WEB_CLIENT_INSTALL | NTS_SERVLET_ALLOW_CLIENT_INSTALL |
NTS_ENABLE_WEB_MANAGE_NOTES_ID | NTS_SERVLET_ALLOW_MANAGE_NOTES_ID |
NTS_ENABLE_WEB_REPORT_PROBLEM | NTS_SERVLET_ALLOW_REPORT_PROBLEM |
NTS_ENABLE_USER_COMMANDS | NTS_SERVLET_ALLOW_USER_COMMANDS |
NTS_ENABLE_USER_MANAGE_SECURITY | NTS_SERVLET_ALLOW_USER_MANAGE_SECURITY |
NTS_ENCRYPTION_ALLOW_DELETE_IDFILE | NTS_SERVLET_ALLOW_DELETE_IDFILE |
NTS_LOG_LEVEL_SERVLET_REQUEST_RESPONSE | NTS_CONSOLE_REQUEST_RESPONSE |
NTS_MIN_BUILD_NUM_CHANGED_DB | NTS_PUSH_CHANGEDDB_MINIMUM_BUILDNUMBER |
NTS_SYNCML_NTSPORT | NTS_PORT_TRAVELER |
NTS_SYNCML_PUSHPORT | NTS_PORT_PUSH_TCP |
NTS_SYNCML_SERVLETPORT | NTS_PORT_SERVLET |
NTS_WEB_FOOTER_INCLUDES_SERVER_INFO | NTS_SERVLET_WEB_FOOTER_INCLUDES_SERVER_INFO |
During startup, IBM Traveler also scans notes.ini
for all parameters with names
starting with NTS_
. If a parameter with this prefix is found but is not recognized,
a warning message is output to the Domino® console.