Home
Test Author Guide
This guide describes how to create test scripts in HCL OneTest™ Performance and enhances tests by applying different test elements such as dataset, variables, and verification points. This guide is intended for testers.
Emulating workloads
You emulate a workload by creating a schedule and adding user groups/rate runner groups, tests, and other elements to it.
Monitoring response time breakdown
You can use response time breakdown to see statistics on any page element that is captured while running a test schedule or imported from historical data.
Enabling response time breakdown collection
You can enable response time breakdown collection to see how much time is spent in each part of the application as it runs.

Test Author Guide
This guide describes how to create test scripts in HCL OneTest™ Performance and enhances tests by applying different test elements such as dataset, variables, and verification points. This guide is intended for testers.
- Creating tests
  To create a test, you record representative interactions with an application.
- Editing tests
  After you record a test, you can edit it to include datasets (to provide variable data rather than the data that you recorded), verification points (to confirm that the test runs as expected), and data correlation (to ensure that returned data is appropriate for the corresponding request). You can also add protocol-specific elements to a test. When you edit a test, the modified items appear in italic type. The italic type changes to regular type after you save the test.
- Compound tests
  You can create compound tests to help you organize smaller tests into scenarios that can then be run end-to-end. You can combine tests from different extensions to achieve end-to-end flow.
- Simulating services with stubs
  Service stubs enable you to simulate the behavior of an actual service for a wide variety testing or integration purposes.
- Sending service requests with the generic service client
  The generic service client enables you to send requests to services for which you do not have a convenient client and to view the responses returned by the service.
- Emulating workloads
  You emulate a workload by creating a schedule and adding user groups/rate runner groups, tests, and other elements to it.
  - Schedule overview
    A schedule is the "engine" that runs a test. However, schedules are much more than simple vehicles for running tests. You can design or emulate the real-life workload by creating various groups and dividing the load across different remote agents that generate load on the application under test. A schedule can be as simple as one virtual user or one iteration running one test, or as complicated as hundreds of virtual users or iteration rates in different groups, each running different tests at different times.
  - Creating a VU Schedule
    You can create a VU Schedule to accurately emulate the actions of individual users.
  - Creating a Rate Schedule
    By creating a Rate Schedule, you can model the different behaviors of how the application is accessed and measure the rate accuracy.
  - Using Application Performance Management in a schedule
    You can use Application Performance Management (APM) in a schedule to enable AppDynamics or Dynatrace applications and enhance the data collection during load testing by adding HTTP headers to the request in your HTTP tests. You can also use APM to monitor the performance of applications.
  - Think time overview
    Think time is a delay in the processing of a request to reproduce the time that a human would take to read or examine the data that is displayed from a previous user action. Think time is calculated from the time that a request is received (that is, the display is complete on the monitor) until the time that the user clicks a key or link to perform an action.
  - Working with agents
    If you have a significant workload to test, typically a single computer might not be able to process the load efficiently. You need to distribute the load across multiple computers, also called HCL OneTest™ Performance agents. The agents are installed on computers to generate the load on the application.
  - Adding a test to a schedule
    By adding a test to a schedule, in this context, is used to refer to VU Schedule and Rate Schedule, you can emulate the action of an individual user.
  - Adding must run tests
    In a schedule, you can use the Finally block to specify tests that must be run after the main workload is completed, when the last stage duration is expired, or a schedule is stopped manually.
  - Assigning variables
    In addition to assigning variables at the test level, you can assign variables at the schedule, in this context, is used to refer to VU Schedule and Rate Schedule level and User or Rate Runner group level. When you assign variables at the schedule level, all the tests and groups in the schedule can use the variable initial values, if they have the same variable names.
  - Defining performance requirements in schedules
    You can define performance requirements to specify the acceptable thresholds for the performance parameters in a schedule. The performance requirements that you define can also be used to validate the service-level agreements.
  - Repeating tests in a schedule
    By adding a loop to a schedule, in this context, is used to refer to VU Schedule and Rate Schedule, you can repeat a test for a number of iterations and set the rate for running a test. If the loop contains a synchronization point, the synchronization point is released after the first iteration of the loop and stays released for all further iterations.
  - Creating rate generators in user groups
    A rate generator is a workload container that specifies the number of tasks that the virtual testers run in a given time period. For example, you might be testing an Order Entry group that completes 10 forms every hour, or you might be testing a web server that you want to be able to support 100 hits every minute. Use a rate generator to model this time-based behavior.
  - Running tests at a set rate
    To run a test at a set rate, you add a loop to the schedule to control the iteration rate, and then add tests to the loop. The tests, which are children of the loop, are controlled by the loop. If the loop contains a synchronization point, the synchronization point is released after the first iteration of the loop and stays released for all further iterations.
  - Running tests in random order
    A schedule that contains only user groups and tests will run each test in a user group sequentially. By adding a random selector to a schedule, you can repeat a series of tests in random order, thus emulating the varied actions of real users.
  - Adding a transaction to a schedule
    A transaction is a specific group of test elements whose performance you are interested in. When viewing the test results, you can view performance data about any transactions that you have added.
  - Emulating network traffic from multiple hosts
    By default, when you run a schedule, each virtual user has the same IP address. However, you can make each virtual user appear as though it is running on its own host. To do this, you configure IP aliases on the host computer, and enable IP aliasing in the schedule. When you run the schedule, the network traffic will appear to be generated by multiple hosts.
  - Monitoring resource data
    Resource Monitoring is used to capture data, such as processor or memory usage, while running a test schedule. It can provide a comprehensive view of a system under test, to help identify issues. You can monitor data sources from a local or cloud schedule, or from a Service.
  - Resource Monitoring Service
    When you apply load to a system under test, the system's resources are consumed increasingly. If the capacity of the resources does not match the load, you will notice performance degradation in the results. With the Resource Monitoring Service, you can continually observe the health of the system's resources.
  - Monitoring response time breakdown
    You can use response time breakdown to see statistics on any page element that is captured while running a test schedule or imported from historical data.
    - Enabling response time breakdown collection
      You can enable response time breakdown collection to see how much time is spent in each part of the application as it runs.
    - Enabling response time breakdown collection on Vista
      Microsoft™ Windows™ Vista, Windows 7, and Windows Server 2008 include security features that are not in previous versions of Windows. You must adjust the security settings of these operating systems to collect response time breakdown data. The default security settings do not allow response time breakdown collection. By default, the firewall blocks inbound connection attempts. You must create an inbound connection rule to allow the HCL OneTest™ Performance Agent to connect to the computer.
    - Setting logging levels
      To limit the amount of response time breakdown data collected, adjust logging levels.
    - Enabling response time breakdown collection for specific page elements
      You can enable response time breakdown for specific pages or page elements to see how much time is spent in each part of the application as the schedule runs. Enabling response time breakdown collection for only certain page elements can be useful if you want to minimize the amount of collected data. Enabling response time breakdown collection for a whole test or schedule can require substantial amounts of memory.
    - Filtering POJO packages, methods, and classes
      You can filter selected plain old Java™ object (POJO) packages, methods, and classes from response time breakdown collection.
  - Setting log and statistic levels
    Within a schedule, you set the size and sampling rate of the test log and the problem determination log, as well as the statistics that are displayed during a run.

Enabling response time breakdown collection

You can enable response time breakdown collection to see how much time is spent in each part of the application as it runs.

Before you begin

To collect response time breakdown, the data collection infrastructure must be installed, configured, and running on all computers that are used in the distributed application under test. If you enable response time breakdown collection for a test and the remote computers are not running the data collection infrastructure, the following error is displayed: IWAY0159E The data collection infrastructure does not appear to be running on hostname. Please ensure that it is running and try again.

Procedure

Open a schedule in the editor.
In the Schedule Element Details area, click the Response Time Breakdown tab.
Select Enable collection of response time data.
This activates the test list, the location list, and Options.
Click Add.
- To add a new response time breakdown location, select Add New.
- To add an existing response time breakdown location, select Add Existing.
Add locations for every application server from which to collect response time breakdown information.

Note: For this feature to work, starting in release 10.5.2, you must disable the default option Generate unique name for HTTP Request before generating your tests. You can go to Windows > Preferences > Test > Test Generation > HTTP Test Generation to disable Generate unique names for HTTP request.

Results

You have enabled response time breakdown data collection.

What to do next

Set logging detail levels.