Publish stubs by using the command line

You can publish a stub to HCL® Quality Server, Dockerfile and build context, or Kubernetes by using the HCL OneTest™ API command line.

Note: To publish to a Dockerfile and build context or Kubernetes, only stubs that are based on specific transports are supported. For more information, see the related links.

The following is the syntax to use:

IntegrationTesterCmd Options publish-stubs

HCL® Quality Server

The following is an example syntax to publish a stub to HCL® Quality Server:

IntegrationTesterCmd --serverUrl "https://Hostname or IP address:5443/RTCP/" 
--domain <Domain name> --environment <Environment name> 
--project <Path to project file> publish-stubs

Starting from version 10.0.0, you can publish a managed stub with a default configuration to HCL® Quality Server and the stub is not started automatically after publishing. For more information about managed or server-based stubs, refer to the related links.

You can opt to publish stubs with any of the following conditions:

Publishing the first instance of a stub. A new managed stub instance is created in the selected environment and domain, with a default configuration and is in the STOPPED state.
Publishing to update the version of an existing stub. All existing instance of that stub type are updated but their configuration settings are not changed.

You can start the published stubs by using the start stub command for the managed stubs, which is switch-on-stub.

Note: If you want to update the configuration of an existing stub instance, you must first stop the stub, if it is running and then update its configuration from the command line.

The following table lists the options that you can use with the IntegrationTesterCmd command to publish stubs to HCL® Quality Server.


Options	Description	Required
--optionsFile	The path to an XML file that contains the command options. Any options that are explicitly specified override those options set in this file. For details of the format of this file, refer to the related links.	No
--serverUrl/-u	URL of the HCL® Quality Server.	Yes
--domain/-d	Domain name.	Yes
--environment/-e	Environment name.	Yes
--project/-p	The full path to a project file.	Yes
--stubFilter	The filter that is used to select which stubs are published. A filter is defined by XML type tags that describe the hierarchy of the stubs to publish as it appears in the project within HCL OneTest™ API. Each filter declares the component names, an operation name, and the folder names that belong to the stubs to publish. If not specified, the filter defaults to publishing all stubs. For more information about selecting stubs by using a stub filter, refer to the related links.	No, default is to publish to all stubs in the project.
--majorVersion	The major version at which to publish the stubs (optional). The default is to use the latest version on the server for that project, domain, environment combination. For more information about specifying stub versions, see the related links.	No, default is to use the latest version on the server for that project, domain, and environment combination.
--minorVersion	The minor version at which to publish the stubs (optional). The default is to use the latest version on the server for that project, domain, environment combination. For more information about specifying stub versions, see the related links.	No, default is to use the latest version on the server for that project, domain, environment combination.
--updateMode	The `updateMode` option can be specified to further control which stubs are published.	No, default is publish all stubs, old and new.
--securityToken	The value of the security token to use for authentication with HCL® Quality Server when domain security is enabled (optional). For more information, refer to the related links.	No, default is to send no token.

Publishing stubs to Dockerfile and build context by using the command line

Before you build the Docker image for a stub that has been published to a Dockerfile and build context, you must set up to use Docker.

The following is an example syntax to publish a stub to a Dockerfile and build context output directory:

IntegrationTesterCmd --destination docker --outputDirectory <Path to output directory> 
--dockerfileTemplate ubuntu --environment <Name of environment> 
--project <Path to project file> --stubFilter <Filter value> publish-stubs

The following table lists the options that you can use with the IntegrationTesterCmd command to publish stubs to a Dockerfile and build context output directory.


Options	Description	Required
--optionsFile	The path to an XML file that contains the command options. Any options that are explicitly specified override those options set in this file. For details of the format of this file, refer to the related links.	No
--destination	The destination to publish stubs. The value can be `docker` or `rtcp`. The default is `rtcp` and is used if the destination option is not specified. `docker` must be specified to publish to a Dockerfile and build context.	Yes
--outputDirectory	The path to the directory where the Dockerfile and other context files are output.	Yes
--dockerfileTemplate	A template Dockerfile that is used to generate a Dockerfile. HCL OneTest™ API provides the ubuntu template for you to use.	Yes
--dockerfileComment	Optional text in quotation marks that is added as a comment in the generated Dockerfile.	No
--environment/-e	Environment name.	Yes
--project/-p	The full path to a project file.	Yes
--stubFilter	The filter that is used to select which stubs are published. A filter is defined by XML type tags that describe the hierarchy of the stubs to publish as it appears in the project within HCL OneTest™ API. Each filter declares the component names, an operation name, and the folder names that belong to the stubs to publish. If not specified, the filter defaults to publishing all stubs. For more information about selecting stubs by using a stub filter, refer to the related links.	No, default is to publish to all stubs in the project.

The following example on Windows systems outputs a Dockerfile and build context files to C:\myImages\stubA.

IntegrationTesterCmd --destination docker --outputDirectory C:\myImages\stubA 
--dockerfileTemplate ubuntu --environment Env1 
--project C:\projects\P1\P1.ghp --stubFilter "<O>TestOperation</O>" publish-stubs

Build a Docker image by using the Dockerfile

The Dockerfile and context files in the output directory can be used to build a Docker image.

The following is an example syntax to build a Docker image from the output of the publish-stub command:

docker build -t <name> <dockerfile_location>

Where name is the name and optionally a tag in the 'name:tag' format for the image that you want to create.

Where dockerfile_location is the output directory that contains the Dockerfile and build context files.

The following example on Windows systems, builds a Docker image that is named stubimage from a Dockerfile and build context files that were published to C:\myImages\StubA

docker build -t stubimage C:\myImages\stubA

If the output directory is not accessible by the Docker client, for example it is on a different computer, the directory must be copied to an accessible directory on the Docker client computer before you run the Docker build command with the dockerfile_location updated.

When the Docker image is created, it can be run as a container. For information about running the container, refer to the related links.

For more information about building Docker images, refer to the related links.

Publishing stubs to Kubernetes by using the command line

The following is an example syntax to publish a stub to the Kubernetes output directory:

IntegrationTesterCmd --destination k8s --outputDirectory <Path to output directory> 
--k8sIdentifier <Name of identifier> --DockerRegistry <Name of Docker registry> --LicensingServer <URL of licensing server> --LicensingServerID <ID of licensing server> 
--environment <Name of environment> --project <Path to project file> --stubFilter <Filter value> publish-stubs

The following table lists the options that you can use with the IntegrationTesterCmd command to publish stubs to the Kubernetes output directory.


Options	Description	Required
--optionsFile	The path to an XML file that contains the command options. Any options that are explicitly specified override those options set in this file. For details of the format of this file, refer to the related links.	No
--destination	The destination to publish stubs. `k8s` must be specified to publish to Kubernetes.	Yes
--outputDirectory	The path to the directory where the YAML file, project files, and Library files are output.	Yes
--k8sIdentifier	An identifier string that is used to name and label resources within the Kubernetes container so you can identify the stubs that you are running. The identifier can be a maximum of 40 lowercase alphanumeric characters [a-z, 0-9]. You can use a hyphen (-) anywhere except as the first or last character.	Yes
--DockerRegistry	The Docker registry and namespace in the format `host:port/namespace`. This value is used to reference the Docker image. The default is `my.docker.registry:5000`.	Yes
--LicensingServer	The FlexNet server URL. By default, the server URL is taken from the HCL_ONETEST_LICENSING_URL environment variable. Use this option to override the value. This information is copied into the generated YAML file such that it is passed to the container. If you do not know the value of the licensing server, you must edit the YAML file and add the correct value before deployment.	No
--LicensingServerID	The ID of the FlexNet server. By default, the server ID will be taken from the HCL_ONETEST_LICENSING_ID environment variable. This information is copied into the generated YAML file such that it is passed to the container. If you do not know the value of the licensing server, you must edit the YAML file and add the correct value before deployment.	No
--environment/-e	Environment name.	Yes
--project/-p	The full path to a project file.	Yes
--stubFilter	The filter that is used to select which stubs are published. A filter is defined by XML type tags that describe the hierarchy of the stubs to publish as it appears in the project within HCL OneTest™ API. Each filter declares the component names, an operation name, and the folder names that belong to the stubs to publish. If not specified, the filter defaults to publishing all stubs. For more information about selecting stubs by using a stub filter, refer to the related links.	No, default is to publish to all stubs in the project.

You must copy the project files and the library files to a file server from where they can be downloaded by an intiContainer called fetch-project that is run before the stub container is started. You can then run the stubs in the Kubernetes cluster.

Publishing stubs to Istio by using the command line

The following is an example syntax to publish a stub to the Istio output directory:

IntegrationTesterCmd --destination istio --outputDirectory <Path to output directory> 
--k8sIdentifier <Name of identifier> --DockerRegistry <Name of Docker registry> --LicensingServer <URL of licensing server> --LicensingServerID <ID of licensing server> 
--environment <Name of environment> --project <Path to project file> --stubFilter <Filter value> publish-stubs

The following table lists the options that you can use with the IntegrationTesterCmd command to publish stubs to the Istio output directory.


Options	Description	Required
--optionsFile	The path to an XML file that contains the command options. Any options that are explicitly specified override those options set in this file. For details of the format of this file, refer to the related links.	No
--destination	The destination to publish stubs. `istio` must be specified to publish to Istio on Kubernetes.	Yes
--outputDirectory	The path to the directory where the YAML file, project files, and Library files are output.	Yes
--k8sIdentifier	An identifier string that is used to name and label resources within the Kubernetes container so you can identify the stubs that you are running. The identifier can be a maximum of 40 lowercase alphanumeric characters [a-z, 0-9]. You can use a hyphen (-) anywhere except as the first or last character.	Yes
--DockerRegistry	The Docker registry and namespace in the format `host:port/namespace`. This value is used to reference the Docker image. The default is `my.docker.registry:5000`.	Yes
--LicensingServer	The FlexNet server URL. By default, the server URL is taken from the HCL_ONETEST_LICENSING_URL environment variable. Use this option to override the value. This information is copied into the generated YAML file such that it is passed to the container. If you do not know the value of the licensing server, you must edit the YAML file and add the correct value before deployment.	No
--LicensingServerID	The ID of the FlexNet server. By default, the server ID will be taken from the HCL_ONETEST_LICENSING_ID environment variable. This information is copied into the generated YAML file such that it is passed to the container. If you do not know the value of the licensing server, you must edit the YAML file and add the correct value before deployment.	No
--environment/-e	Environment name.	Yes
--project/-p	The full path to a project file.	Yes
--stubFilter	The filter that is used to select which stubs are published. A filter is defined by XML type tags that describe the hierarchy of the stubs to publish as it appears in the project within HCL OneTest™ API. Each filter declares the component names, an operation name, and the folder names that belong to the stubs to publish. If not specified, the filter defaults to publishing all stubs. For more information about selecting stubs by using a stub filter, refer to the related links.	No, default is to publish to all stubs in the project.

Error codes

For details of any error codes, see Exit codes for Command-line client and Ant client.