Home
Planning
Use this topic as an overview of planning task.
Planning the TCP/IP network
The default TCP/IP configuration for an HCL Domino® server is one IP address that is globally bound, meaning that the server listens for connections at the IP addresses of all NICs on the computer. Global binding works as long as the computer does not have more than one IP address offering a service over the same assigned TCP port.
IPv6 and Domino®
You can enable IPv6 support in HCL Domino® for SMTP, POP3, IMAP, LDAP, and HTTP services on IBM® AIX®, IBM i, and Linux™ systems.
Connecting a Notes® client to a Domino® server using IPv6
You can enable IPv^ on Notes® and Domino®.

Planning
Use this topic as an overview of planning task.
- Roadmap for deploying Domino® servers
  Use this as a tool when planning how to integrate HCL Domino® into your existing environment.
- Planning server-to-server connections
  Servers must connect to each other to exchange data, for example to replicate databases and exchange mail. You can create connections between servers across a local area network (LAN) or wide area network (WAN), by using a pass-through server (a server that acts as an intermediary server between a client and its destination), or over the Internet. Create a Server Connection document whenever you need to establish any new or additional server connections. You can modify this document when necessary.
- Planning directory services
  HCL Domino® provides a range of directory service features.
- Planning a mail routing topology
  HCL Domino® offers you considerable flexibility in configuring your mail system infrastructure, allowing you to use HCL Notes® routing, SMTP routing, or both, for internal and external messages.
- Planning a cluster
  When planning a cluster, it is important to consider the performance and ability of your hardware. The cluster must have enough CPU power, memory, and disk space to handle the cluster traffic and the number of databases and replicas required.
- Planning the TCP/IP network
  The default TCP/IP configuration for an HCL Domino® server is one IP address that is globally bound, meaning that the server listens for connections at the IP addresses of all NICs on the computer. Global binding works as long as the computer does not have more than one IP address offering a service over the same assigned TCP port.
  - Using Domino® on IBM® i with TCP/IP
    The HCL Domino® server on IBM® i uses TCP/IP to communicate with HCL Notes® clients and the Internet. For the Domino server to work properly, TCP/IP must be set up and active on your system.
  - NRPC name-to-address resolution over TCP/IP
    In the TCP/IP protocol, the method most commonly used to resolve server names to network addresses is the Domain Name System (DNS), an Internet directory service developed both to allow local administrators to create and manage the records that resolve server names to IP addresses and to make those records available globally. While the POP3, IMAP, LDAP, and HTTP services use DNS directly, the NRPC service uses a combination of the Notes® Name Service and DNS to resolve server names to network addresses.
  - Ensuring DNS resolves in TCP protocols
    When you register a new HCL Domino® server, you specify a common name for it. Within a Domino hierarchical name, the common name is the portion before the leftmost slash. For example, in the name App01/East/Renovations, the common name is App01. The common name, not the hierarchical name, is the name that the Domino server is known by in DNS.
  - Considerations for changing a server IP address
    Changing the IP address of an HCL Domino® server can cause access issues.
  - IPv6 and Domino®
    You can enable IPv6 support in HCL Domino® for SMTP, POP3, IMAP, LDAP, and HTTP services on IBM® AIX®, IBM i, and Linux™ systems.
    - Using IPv6 address formats with Domino® and Notes®
      You can use an IPv6 address as a string anywhere that an IPv4 address as a string can be used.
    - Installing the IPv6 stack
      To install the IPv6 stack, follow the instructions provided for by your platform's vendor. The instructions in this section contain general guidelines for many platforms, but you need to follow the instructions provided by the manufacturer of your platform.
    - Receiving incoming connections on IPv6 or IPv4 sockets
      UNIX™ platforms receive both IPv4 and IPv6 incoming connections on the same socket. Microsoft™ Windows™ is not capable of receiving both incoming IPv4 and IPv6 connections on the same socket. If IPv6 is disabled, Microsoft Windows only receives IPv4 connections. If IPv6 is enabled and the port is not bound to an address, only IPv6 connections are received. To receive both IPv4 and IPv6 connections, define two ports -- one bound to an IPv4 address and one bound to an IPv6 address. This is easily done for NRPC, but until now, Internet servers only provided support for a single HCL Notes® port.
    - Examples of using NOTES.INI variables with IPv6
      These examples show how to set NOTES.INI variables to support various platforms and configurations when using IPv6.
    - Connecting a Notes® client to a Domino® server using IPv6
      You can enable IPv^ on Notes® and Domino®.
  - Advanced Domino® TCP/IP configurations
    Domino® servers and partitioned Domino servers can have multiple NICs (network interface cards), each with its own IP address.
- Planning the NetBIOS network
  The HCL Domino® network is compatible with NetBIOS, a set of IBM® session-layer LAN services that has evolved into a standard interface that applications use to access transport-layer network protocols.
- Messaging overview
  The HCL Domino® mail system has three basic components: Domino mail servers, Domino mail files, and mail clients. The Domino mail server is the backbone of an organization's messaging infrastructure, acting both as an Internet mail server and an HCL Notes® mail server. Domino provides standards-based Internet messaging through its support of the Simple Mail Transfer Protocol (SMTP), Post Office Protocol version 3 (POP3), Internet Message Access Protocol (IMAP), and Multipurpose Internet Mail Extensions (MIME). At the same time, Domino supports Notes mail through the use of Notes routing protocols -- Notes remote procedure calls (NRPC) -- and the Notes rich text message format.
- Planning your Notes® client deployment
  Use the references listed here to plan for, install, upgrade to, and configure the HCL Notes® client.
- Planning security
  An important aspect of planning security for your Domino® environment is understanding the tasks and features involved with securing each type of resource.

Connecting a Notes® client to a Domino® server using IPv6

You can enable IPv^ on Notes® and Domino®.

Procedure

Install the HCL Domino® server and HCL Notes® client.
Enable IPv6 on both the client and the server by adding the NOTES.INI setting, TCP_ENABLEIPV6=1, to the NOTES.INI files on the Notes® client and Domino® server.
Configure a zone on both the Notes® client and the Domino® server.
On the Domino® server, configure the port for IPv4 and the port for IPv6.
Start the Notes® client.
Optional: Connect from the Notes® client using IPv6 address-NRPC. Optionally, you can enter the zone if you want to.
A low priority Connection document is added to the local Domino® Directory (names.nsf). This Connection document and IPv6 are used during future connection attempts initiated with File > Application > Open.

Connecting from a Notes® client using IPv6 address-NRPC

About this task

Use this procedure to connect from the Notes® client to a server using an IPv6 address.

Procedure

Click File > Application > Open.
Optional: In the Server field, enter the IPv6 address. Optionally, you can enter a server name that resolves to an IPv6 address instead of entering the IPv6 address in the Server field.

A low-priority Connection document is added to your local Domino® Directory (names.nsf).