You set statistics preferences to enable statistics reporting
and statistics charting. The Statistics section in Administration
preferences is also where you specify the polling and reporting time
interval used for gathering and reporting statistics.
About this task
You also enable statistic alarms for use with statistic
event generators. If you create statistics event generators to report
alarms, you must enable statistics alarms.
Procedure
- From the Domino® Administrator,
click .
- Click Statistics.
- Complete these fields:
Table 1. Statistics preferences
Field |
Action |
Generate statistic reports while monitoring
or charting statistics |
Do one:
- Enable the field and then specify, in minutes, how often to create
statistics reports in the Monitoring Results database (STATREP.NSF).
Default is 45 minutes. The value must be greater than the monitoring
poll interval specified in the Monitoring preferences.
- Disable the field if you do not want to create statistics reports
or charts.
|
Check statistic alarms while monitoring or
charting statistics |
Do one:
- Enable the field to report an alarm when a statistic exceeds a
threshold. You must enable this field to generate a statistic events.
Alarms are reported to the Monitoring Results database (STATREP.NSF).
- Disable the field if you do not want to generate alarms.
|
Chart statistic using same poll interval as
monitoring |
Do one:
- Enable the field to use the poll interval specified in the Monitoring
preferences.
- Disable the field to set a charting interval that is different
than the poll interval. Then specify a time interval in which to chart
statistics. The default is 20 seconds.
|
- Click OK.