Home
IBM® Domino 10.0.1 Documentation
Welcome to the IBM® Domino 10.0.1 Administrator Help.
Planning
Use this topic as an overview of planning task.
Planning server-to-server connections
Servers must connect to each other to exchange data, for example to replicate databases and exchange mail. You can create connections between servers across a local area network (LAN) or wide area network (WAN), by using a pass-through server (a server that acts as an intermediary server between a client and its destination), or over the Internet. Create a Server Connection document whenever you need to establish any new or additional server connections. You can modify this document when necessary.
Internet connections
To enable an IBM® Domino® server to connect to another server across the Internet, you must establish Internet access with an Internet Service Provider (ISP) and register an Internet domain name with the ISP -- for example, renovations.com. After you contract Internet service, create Connection documents to instruct the local Domino servers how to contact the target server.
Creating a server-to-server Internet connection through a proxy server
When two IBM® Domino® servers both have direct, constant connections to the Internet, each can use the IP address of the other to contact it as though both servers were on the same LAN.

IBM® Domino 10.0.1 Documentation
Welcome to the IBM® Domino 10.0.1 Administrator Help.
- What's new in IBM® Domino® 10?
  Learn about all of the new features for administrators in IBM® Domino® 10.
- Overview
  Welcome to IBM® Domino® Administrator Help.
- Installing
  Use this documentation to install the IBM® Domino® server and subsequently deploy the IBM Notes® client.
- Planning
  Use this topic as an overview of planning task.
  - Roadmap for deploying Domino® servers
    Use this as a tool when planning how to integrate IBM® Domino® into your existing environment.
  - Planning server-to-server connections
    Servers must connect to each other to exchange data, for example to replicate databases and exchange mail. You can create connections between servers across a local area network (LAN) or wide area network (WAN), by using a pass-through server (a server that acts as an intermediary server between a client and its destination), or over the Internet. Create a Server Connection document whenever you need to establish any new or additional server connections. You can modify this document when necessary.
    - Remote modem access and server topology
      Servers that are not on the same LAN or WAN can use modem connections to communicate with each other. For example, servers in remote field offices can establish modem connections with servers in a central office to route mail or replicate databases.
    - How a server connects to another server
      A connecting IBM® Domino® server uses the following steps to determine how to connect to a destination server.
    - Replication and server topology
      As the number of IBM® Domino® servers on your network increases, so does the amount of replication required to distribute information across the network. Because replication uses memory and processing time, plan how servers connect to perform replication. If you allow servers to replicate at random, so that a given server replicates a single database with multiple servers, or perhaps replicates different databases with different servers, servers can become so overloaded with replication requests that it interferes with their ability to respond to client requests.
    - Creating a local area network (LAN) connection
      Create a connection document to schedule mail routing to and replication between servers on a LAN.
    - Forcing a server connection to use a specific protocol
      If multiple protocols are available for connecting a source server to a given destination, you can specify which protocol to use by setting the usage priority in a Connection document describing how the source server contacts the destination.
    - Setting up external domain lookups
      An IBM® Notes® user who wants to open a database on a server outside the local IBM Domino® domain, can do so only if there is a connection document in either their local Contacts, or in the Domino Directory on their home server that describes how to reach the target server. To enable Notes users to connect more easily to servers outside of their domain, you can create an External Domain Network Information (EDNI) document in the Domino Directory.
    - Internet connections
      To enable an IBM® Domino® server to connect to another server across the Internet, you must establish Internet access with an Internet Service Provider (ISP) and register an Internet domain name with the ISP -- for example, renovations.com. After you contract Internet service, create Connection documents to instruct the local Domino servers how to contact the target server.
      - Creating a server-to-server Internet connection through a proxy server
        When two IBM® Domino® servers both have direct, constant connections to the Internet, each can use the IP address of the other to contact it as though both servers were on the same LAN.
    - Pass-through servers and hunt groups
      Pass-through is a process that runs on a server and establishes connections between the users and servers connected to that server and other servers. Pass-through connections use an intermediary server as a "stepping stone" to connect the two servers.
    - Planning for modem use
      For an IBM® Domino® server to communicate with a remote Domino server by modem you can install one or more modems on the calling and receiving servers, configure the communication port, and create a network dialup connection from the calling server to the receiving server.
    - Connecting Notes® clients to servers
      After you set up a server to accept inbound connections, it can accept them from both servers and clients. The methods used to establish connections from clients to servers on remote networks are similar to those used when connecting one server to another.
  - Planning directory services
    IBM® Domino® provides a range of directory service features.
  - Planning a mail routing topology
    IBM® Domino® offers you considerable flexibility in configuring your mail system infrastructure, allowing you to use IBM Notes® routing, SMTP routing, or both, for internal and external messages.
  - Planning a cluster
    When planning a cluster, it is important to consider the performance and ability of your hardware. The cluster must have enough CPU power, memory, and disk space to handle the cluster traffic and the number of databases and replicas required.
  - Planning the TCP/IP network
    The default TCP/IP configuration for an IBM® Domino® server is one IP address that is globally bound, meaning that the server listens for connections at the IP addresses of all NICs on the computer. Global binding works as long as the computer does not have more than one IP address offering a service over the same assigned TCP port.
  - Planning the NetBIOS network
    The IBM® Domino® network is compatible with NetBIOS, a set of IBM session-layer LAN services that has evolved into a standard interface that applications use to access transport-layer network protocols.
  - Messaging overview
    The IBM® Domino® mail system has three basic components: Domino mail servers, Domino mail files, and mail clients. The Domino mail server is the backbone of an organization's messaging infrastructure, acting both as an Internet mail server and an IBM Notes® mail server. Domino provides standards-based Internet messaging through its support of the Simple Mail Transfer Protocol (SMTP), Post Office Protocol version 3 (POP3), Internet Message Access Protocol (IMAP), and Multipurpose Internet Mail Extensions (MIME). At the same time, Domino supports Notes mail through the use of Notes routing protocols -- Notes remote procedure calls (NRPC) -- and the Notes rich text message format.
  - Planning your Notes® client deployment
    Use the references listed here to plan for, install, upgrade to, and configure the IBM® Notes® client.
  - Planning security
    An important aspect of planning security for your Domino® environment is understanding the tasks and features involved with securing each type of resource.
- Configuring
  Use this information to configure an IBM® Domino® network, users, servers (including Web servers), directory services, security, messaging, widgets and live text, and server clusters. Also use this information to set up IBM iNotes® on a server using Domino Off-Line Services (DOLS).
- Securing
  This section describes IBM® Domino® security features, including execution control lists, IDs, and SSL.
- Administering
  This documentation provides information about the administration tools for managing and monitoring IBM Domino® servers and databases.
- Tuning
  Use this information to improve IBM® Domino® server, Domino Web server, and messaging performance through the use of resource balancing and activity trends, Server.Load commands, advanced database properties, cluster statistics, and the Server Health Monitor.
- Troubleshooting
  This section describes how to find and solve problems with IBM® Domino® server and Administrator client.
- Glossary

Creating a server-to-server Internet connection through a proxy server

When two IBM® Domino® servers both have direct, constant connections to the Internet, each can use the IP address of the other to contact it as though both servers were on the same LAN.

About this task

To define the connections between the two, you create a LAN connection document. However, when a server is connected through a proxy server, rather than having a direct connection, after you create a LAN connection document to define the connection, you must complete the proxy information in the Server document of the calling server as described in the following procedure:

Note: By default, if the server is configured to use a proxy, it uses the proxy for all connections. To prevent use of the proxy for connections to certain servers, enter the server names in the No Proxy for these hosts or domains field on the Ports > Proxies tab on the server document.

Procedure

From the Domino® Administrator, click the Configurations tab and expand the Server view.
Select the Server document of the server to connect to the Internet through the proxy, and click Edit Server.
Click the Ports > Proxies tab and then do one of the following:
- To connect through an HTTP proxy, in the HTTP Tunnel proxy field, enter the proxy's fully-qualified domain name or IP address and specify the port to use for the connection. For example, enter httpproxy.company.com:8080 or 192.168.77.34:8080.
- To connect through a SOCKS proxy, in the SOCKS proxy field, enter the proxy's fully-qualified domain name or IP address of the SOCKS proxy and specify the port to use for the connection. For example, enter socks.company.com:1080 or 192.168.77.34:1080.
  Note: If you enter values for both fields, Domino® uses the HTTP Tunnel proxy.
Click Save and Close.