Welcome
Tester Guide
This guide describes the tasks that you can perform for testing various domains, technologies, and applications. To enable testing, you must configure and enable the environment for testing.
Tester Guide - API Testing
This guide describes the tasks that you can perform for testing various domains, technologies, and applications. To enable testing, you must configure and enable the environment for testing. This guide is intended for API testers.
API Testing
You can use find information about the tasks that you can perform for testing various domains, technologies, or applications.
Testing applications on z/OS®
You can test applications on IBM® z/OS® systems by using the capabilities that are supported for mainframes by HCL OneTest™ API.
Testing with IBM® IMS™ Connect
For testing with IBM® Information Management System (IBM IMS Connect), you can set up HCL OneTest™ API. With this set up you can record the IBM IMS Connect traffic.

Release Notes
This document contains information about What's new, installation, known issues, known limitations, and contact information of HCL support.
System Requirements
This document includes information about hardware and software requirements for HCL OneTest™ API.
Getting Started
This guide provides an overview and describes the tasks to get you started with HCL OneTest™ API.
Administrator Guide
This guide describes how to install HCL OneTest™ API. After you install the software, you can perform administration tasks such as configuration and integration of the product. This guide is intended for administrators.
Tester Guide
This guide describes the tasks that you can perform for testing various domains, technologies, and applications. To enable testing, you must configure and enable the environment for testing.
- Tester Guide - API Testing
  This guide describes the tasks that you can perform for testing various domains, technologies, and applications. To enable testing, you must configure and enable the environment for testing. This guide is intended for API testers.
  - API Testing
    You can use find information about the tasks that you can perform for testing various domains, technologies, or applications.
    - Testing Java™ applications
      You can use HCL OneTest™ API to test Java™ applications.
    - Testing Java™ Message Service (JMS) systems
      Use the generic JMS plug-in to connect HCL OneTest™ API to a wide range of EAI platforms, which includes any vendor that provides an implementation of this Java™ standard. JMS provides a way of separating the application from the transport layer of providing data. The same Java classes can be used to communicate with different JMS providers by using the JNDI information for a specific provider. The classes first use a connection factory to connect to the queue or topic, and then use populate and send or publish the messages. On the receiving side, the clients then receive or subscribe to the messages
    - Testing Java™ objects
      You can import Plain Old Java™ Objects (POJOs) from JAR files into HCL OneTest™ API in order to parse and construct messages containing the serialized forms of those objects. You can construct and parse the Java objects and perform validation, but you cannot test the objects directly.
    - Testing with Apache Camel components
      You can use HCL OneTest™ API to create tests and stubs by setting up an Apache Camel component in an HCL OneTest API project. You can configure the technology endpoints supported by the Camel component as the physical resources in the HCL OneTest API project and test for the services provided by the technology.
    - Testing with Apache Kafka
      Starting from HCL OneTest™ API 10.0.2 and later, you can create Kafka transports to test Kafka services.
    - Testing with Docker
      You can use Docker containers with HCL OneTest™ API to run stubs co-located with your test systems.
    - Testing with the email transport
      When you use applications in your test environment that use email services, you can use HCL OneTest™ API to create tests and stubs for testing the email services. You can set up an email transport in an HCL OneTest API project and configure the email servers as the physical resources in the HCL OneTest API project, and then test the email services.
    - Testing with Envoy Proxy (Experimental)
      You can use HCL OneTest™ API to record the HTTP traffic on the Envoy Proxy by using the Experimental HTTP Tap Filter feature of the Envoy Proxy.
    - Testing with the File transport
      As with any other transport, the File transport includes both logical and physical configurations. Tests and stubs are associated with the logical File resource, which represents an abstraction of the File resource and is the same for all environments. The physical File Access configuration includes connection details, and you can configure a different physical File Access for each environment.
    - Testing with the FIX transport
      You can use the Financial Information eXchange (FIX) transport and FIX dictionaries in HCL OneTest™ API to help you test trade-related messages and the systems that use them.
    - Testing with the HTTP transport
      To provide support for HTTP-based communications, you must configure and run HCL OneTest™ API by using the HTTP transport and SOAP message formatters.
    - Testing with IBM® API Developer Portals
      You can configure HCL OneTest™ API to synchronize IBM API Connect™ Developer Portal resources or IBM® API Management Developer Portal resources.
    - Testing with IBM® App Connect Enterprise
      When you want to test the services on applications deployed by the integration node of IBM® App Connect Enterprise, you can use the synchronization feature in HCL OneTest™ API to import details of deployed applications into an HCL OneTest API project. You can select the tests and stubs to be created in your project during the synchronization process in HCL OneTest API.
    - Testing with IBM® Integration Bus
      When you want to test the services on applications deployed by the integration node of IBM® Integration Bus, you can use the synchronization feature in HCL OneTest™ API to import details of deployed applications into an HCL OneTest API project. You can select the tests and stubs to be created in your project during the synchronization process in HCL OneTest API.
    - Testing with IBM® WebSphere® Application Server
      You can configure HCL OneTest™ API to synchronize IBM® WebSphere® Application Server resources.
    - Testing with IBM® WebSphere® MQ messages
      You can test WebSphere® MQ messages using the WebSphere MQ transport method or JMS interface. HCL OneTest™ API also supports testing WebSphere MQ on z/OS systems.
    - Testing with WebSphere® Portal
      You can configure HCL OneTest™ API to synchronize IBM® WebSphere® Portal resources.
    - Testing with IBM® z/OS® Connect Enterprise Edition
      IBM® z/OS® Connect Enterprise Edition provides a framework for enabling z/OS®-based programs and data to fully participate in the new API economy for mobile and cloud applications. Use IBM® z/OS® Connect Enterprise Edition to access z/OS subsystems, such as CICS®, IMS™ and Batch, by using RESTful APIs with JSON formatted messages. You can access multiple z/OS subsystems concurrently through a common interface.
    - Testing with Istio
      When you have applications hosted in a Kubernetes cluster that have Istio as a service mesh, you can virtualize the services in the cluster by creating stubs and tests for testing with Istio in HCL OneTest™ API.
    - Testing with Kubernetes
      HCL OneTest™ API supports testing with Kubernetes after you set up a Kubernetes cluster. You can test the containerized applications that run as services in Kubernetes in HCL OneTest API. You can also create and publish stubs from HCL OneTest API to Kubernetes and then run the stubs in Kubernetes.
    - Testing with Microsoft™ .NET objects
      You can import serializable .NET objects from .NET assembly files (.exe or .dll) into HCL OneTest™ API and apply them to messages in the same way as you would apply a schema. A service-based test or stub can then send and receive a message containing a serialized form of a .NET object from the assembly file. You can construct and parse the .NET objects and perform validation, but you cannot test the objects directly.
    - Testing the migrated Postman collections
      You can migrate Postman collections and environments that you created in Postman to HCL OneTest™ API. Operations, transports, tests and stubs are automatically created during migration and you can run the tests and stubs in HCL OneTest API.
    - Testing with MongoDB
      If you are using HCL OneTest™ API 9.5.0 or later, you can create MongoDB transports and run tests against them.
    - Testing with the MQ telemetry transport
      If you are using HCL OneTest™ API 8.6.0 or later, you can create MQ telemetry transports.
    - Testing with Oracle Fusion
      Configure and run HCL OneTest™ API with the Oracle Fusion plug-in, which provides support for synchronization with and testing of the web services and composites that are available on a configured SOA server (that is, an Oracle WebLogic server with Oracle SOA Suite 11g deployed on it).
    - Testing with RabbitMQ
      If you are using HCL OneTest™ API 9.2.1.1 or later, you can create RabbitMQ transports.
    - Testing with SAP applications
      You can use HCL OneTest™ API to test SAP application server resources.
    - Testing with Software AG CentraSite
      You can incorporate governance in your SOA by using the integration of HCL OneTest™ API with Software AG CentraSite.
    - Testing with Software AG Universal Messaging
      You can use HCL OneTest™ API API to test Software AG Universal Messaging Broker server resources. From HCL OneTest API 10.0.2 or later, you can create Software AG Universal Messaging Broker transports, configure and run HCL OneTest API with the Software AG Universal Messaging server.
    - Testing with Software AG webMethods
      You can configure and run HCL OneTest™ API with the Software AG webMethods Integration Server to connect to Software AG webMethods Broker and Integration Server resources.
    - Testing with SSL
      To provide secure connections between clients and servers during testing, you can use the Secure Sockets Layer (SSL) technology supported by HCL OneTest™ API.
    - TCP and UDP
      In HCL OneTest™ API, you can create transports that facilitate communication between clients and servers by using both TCP- and UDP-based sockets.
    - Testing with TIBCO applications
      To use HCL OneTest™ API to test TIBCO messaging, you must configure and run HCL OneTest API with the TIBCO messaging plug-in. Doing so supports TIBCO Rendezvous messaging ("plain" TIBCO Rendezvous messaging and TIBCO ActiveEnterprise (AE) formats), TIBCO EMS messaging, and sending and receiving AE messages by using TIBCO EMS.
    - Testing applications on z/OS®
      You can test applications on IBM® z/OS® systems by using the capabilities that are supported for mainframes by HCL OneTest™ API.
      - Testing with CICS®
        HCL OneTest™ API supports the recording and virtualization of CICS® programs that are run on z/OS® and are called by CICS Distributed Program Link (DPL). The CICS transport supports interacting with such calls in CICS Transaction Server (EXEC CICS LINK calls and ECIRequest calls using IPIC) and CICS Transaction Gateway (ECIRequest calls). CICS programs can be called in a test via a CICS Transaction Gateway.
      - Testing with WebSphere® MQ on z/OS® systems
        You can test WebSphere® MQ on z/OS® by using the HCL OneTest™ API MQ agent module. You can record at the transport level or operation level when running the agent with a single queue manager. If you have a queue sharing group and if you choose to run an instance of the agent for each queue manager within the queue sharing group, you can record shared queues using mirror queue recording. You can also virtualize requests to shared queues using fixed queue stubbing.
      - Testing with IBM® IMS™ Connect
        For testing with IBM® Information Management System (IBM IMS Connect), you can set up HCL OneTest™ API. With this set up you can record the IBM IMS Connect traffic.
        Prerequisites for creating IBM® IMS™ Connect transports
        You must configure JAR files to support transports for IBM® IMS Connect.
        Creating the IMS™ Connect transport
        You create an IBM® IMS Connect transport when you create a logical IBM IMS Connect resource in the Architecture school of the HCL OneTest™ API. Starting from 9.2.0, the IBM IMS Connect transport supports forwarding proxy to assist with your testing.
        Configuring IMS™ Connect messages
        You can configure the IBM® IMS Connect messages for the Send Request action in a test that uses the IBM IMS Connect transport in HCL OneTest™ API.
        Configuring HCL OneTest™ API for recording IMS™ Connect traffic
        You can set up HCL OneTest™ API to record IBM® IMS Connect traffic. In the Recording Studio of HCL OneTest API, recorded traffic can be filtered based upon Datastore, Client ID, Message-Type, and Transaction Code.
        Configuring HCL OneTest™ API for virtualizing IMS™ Connect traffic
        You can set up HCL OneTest™ API to virtualize IBM® IMS Connect traffic.
      - Troubleshooting: Testing on IBM® z/OS®
        You can use workarounds to common problems that you might encounter when you use IBM® z/OS® with HCL OneTest™ API.
    - Managing credentials
      If you have external resources that must be accessed by project or test resources in HCL OneTest™ API and you do not want to expose the credentials used to access the external resources, then you can implement a user-defined access in a credential management system.
    - Configuration of virtual IP addresses as virtual clients
      You can find information about how to configure virtual IP addresses in the operating system, and then use the virtual IP addresses to configure them as virtual clients in tests or as virtual servers in stubs.
    - Configuration of test runs in a GitHub Actions Workflow
      You can configure test runs of test resources that you create in HCL OneTest™ API in a GitHub Actions Workflow. You can choose to run test resources in the GitHub Workflow when you do not want to run the test resources without opening HCL OneTest API.
    - Security vulnerabilities testing by using HCL® AppScan
      You can use HCL® AppScan to scan all HTTP traffic that is generated as part of integration testing in HCL OneTest™ API for security vulnerabilities.
  - Extending HCL OneTest™ API functionality by using custom functions
    You can add more calculations and operations to tests by using the HCL OneTest™ API custom function class. HCL OneTest API custom function is a Java™ class that extends the com.ghc.ghTester.expressions function.
  - Working in non-GUI mode
    You can use the tools and executable files that are provided along with the product software. You can use these tools to perform different test actions in a non-GUI mode.
- Tester Guide - Service Virtualization
  This guide describes the tasks that you can perform for using virtual services or stubs to simulate parts of an environment if the real services are not yet available or because they are difficult or expensive to use. This guide is intended for API Testers.
Test Manager Guide
This guide describes the tasks that you can perform for tracking the quality of the application. This guide is intended for Test Managers.
Troubleshooting
While working with HCL OneTest™ API, you might encounter some problems that you can easily troubleshoot.
Reference Guide
This guide provides the topics to help the API tester use the product by using the user interface, commands or scripts. This guide is intended for API testers.
Security Considerations
You can take certain actions to ensure that your installation is secure, customize your security settings, and set up user access controls.
Notices
This document provides information about copyright, trademarks, terms and conditions for product documentation.

Testing with IBM® IMS™ Connect

For testing with IBM® Information Management System (IBM® IMS™ Connect), you can set up HCL OneTest™ API. With this set up you can record the IBM® IMS™ Connect traffic.

HCL OneTest™ API supports IBM® IMS™ Connect with Information Management System 12-14 by using the Java API included in IBM® IMS™ Enterprise Suite 2.1, 3.1, or 3.2.

You can record and test IBM® IMS™ type 1 and type 2 messages:

Type 1 messages are generated from applications deployed on IBM® WebSphere® Application Server (8.0 and later) that are configured with the IBM® IMS™ Transaction Manager Resource Adapter (12-14 are supported).
Type 2 messages are generated from user-written applications that use Information Management System Enterprise Suite Connect API (C and Java™, 2.1, 2.2, and 3.1 are supported). An IBM® IMS™ Connect configuration handles IMS™ protocol communications from a DataPower® service to IMS™ applications. If you plan to use a DataPower® service to connect to an IMS™ application, you must set the Expect LLLL Response Header option to off. Otherwise, HCL OneTest™ API cannot record the IBM® IMS™ Connect traffic.

Task Flow for testing with IBM® IMS™ Connect

You can complete the following tasks as part of testing the IBM® IMS™ Connect transport in HCL OneTest™ API.


	Task	More Information
1	On your Windows or Linux system, you must configure JAR files to support transports for IBM® IMS Connect.	Prerequisites for creating IBM IMS Connect transports
2	To record interactions with Information Management System systems, you must set up transports to provide information about the infrastructure of these systems.	Creating the IMS Connect transport
3	Configure the IBM® IMS™ Connect messages that you want to test.	Configuring IMS Connect messages
4	You can set up HCL OneTest™ API to record the IBM® IMS™ Connect traffic.	Configuring HCL OneTest API for recording IMS Connect traffic
5	You can set up HCL OneTest™ API to virtualize the IBM® IMS™ Connect traffic.	Configuring HCL OneTest API for virtualizing IMS Connect traffic