Welcome
Test Execution Specialist Guide
This guide describes tasks that you must complete before you can configure and run tests in HCL OneTest™ Server. You can find information about configuring runs for the different test types that are supported. You can also find information about other tasks that you can perform on the Resource Monitoring Service, Virtualization, and Integrations with third-party applications. This guide is intended for testers or test execution specialists.
System modeling
In this topic, you can find information about using the system model feature. You can also find the tasks that you can perform to create a system model. You must configure a repository to save the system model that you created for the application under test.
Associating resources with components
After creating components in the system model, you can navigate to a project in the team space to associate the Suites and Tests or virtual services resources in the project repositories with the components in the system model.

Release Notes
This document includes information about What’s new, installation and upgrade instructions, known issues, and contact information of HCL Customer Support.
System Requirements
This document includes information about hardware and software requirements for HCL OneTest™ Server.
Getting Started Guide
This guide provides an overview of HCL OneTest™ Server. You can find the task flows to get you started with HCL OneTest Server. This guide is intended for new users.
Administrator Guide
This guide describes how to install the HCL OneTest™ Server software.
Test Author Guide
This guide describes how to create test assets in HCL OneTest™ Server and publish test assets to the Git repository that you have configured. You can also edit existing test assets that are in the repository added to your project. This guide is intended for testers and test managers.
Test Execution Specialist Guide
This guide describes tasks that you must complete before you can configure and run tests in HCL OneTest™ Server. You can find information about configuring runs for the different test types that are supported. You can also find information about other tasks that you can perform on the Resource Monitoring Service, Virtualization, and Integrations with third-party applications. This guide is intended for testers or test execution specialists.
- System modeling
  In this topic, you can find information about using the system model feature. You can also find the tasks that you can perform to create a system model. You must configure a repository to save the system model that you created for the application under test.
  - Task flows for working with a system model
    You can find information about the tasks that you can perform when you want to create a system model, create components, associate the components, create linkages among the components, and then publish the system model to the team space repository. Also, you can find information about the tasks that you must perform when you want to modify an existing system model.
  - Adding a repository to a team space
    You must add a repository to the team space when you want to create, modify, or store a system model.
  - Creating a system model
    Before you can create components in a system model, you must create an empty system model and publish the system model to the team space repository.
  - Creating components
    The first step in building a system model is to create components. The components serve as the building blocks for the system model.
  - Creating child components
    You can create components as children of existing components in the system model.
  - Creating linkages between components
    You can create linkages between components that display the relationship between them. The linkages can be between components or between child components of the same or different parent components.
  - Deleting linkages between components
    When you do not want to retain the linkages between components that you created in the system model, you can delete the linkages.
  - Modifying components
    At any point in time, after you create a component, you can modify and update the details of the components such as the component type, and the relationships with other components.
  - Deleting components
    When you do not require a component, you can delete the component.
  - Publishing changes to the system model
    When you create, delete, or modify components in a system model, the changes are saved locally and are not visible to the other project members or team space members. You must publish the system model changes to the team space repository to make your changes visible for all users of the team space.
  - Associating resources with components
    After creating components in the system model, you can navigate to a project in the team space to associate the Suites and Tests or virtual services resources in the project repositories with the components in the system model.
  - Viewing resources associated with components
    After you associate Suites and Tests or virtual services resources with components in the system model, you can view the associated resources from the System Model page. You can opt to start an instance of the associated resource or stop a running instance of the associated resource.
  - Removing resources associated with components
    When you do not want to retain the resource that you associated with a component, you can delete the resource in the system model.
  - Publishing changes of associating resources with components
    After you associate resources in a project with a component in the system model, you must publish the changes made to the branch in the project repository, if you want the associations to be visible to the other members in the project.
  - Viewing the system model
    You can view an existing system model or you can create a system model if a system model does not exist on the System Model page.
  - Deleting a system model
    When you want to remove an existing system model to create a new system model, you can delete the existing system model.
  - Deleting a repository that is added to a team space
    You can delete a repository that you added to the team space when you do not want to use a team space repository.
- Prerequisites to running tests
  Before you can run a test asset in a project on HCL OneTest™ Server, you must read the information about the different tests assets. You can add a remote static agent, Docker host, or Kubernetes cluster to the project and then select it as an alternate location to run the test assets.
- Management of agents
  You can find information about managing the agents that you must install on remote computers and configure the agents to register with HCL OneTest™ Server. After the agents are registered, you can add them to your projects and then select them as locations to run tests.
- Management of Docker hosts
  You can find information about the tasks that you can perform on remote Docker hosts. After you set up a remote Docker host, you can register the Docker host with HCL OneTest™ Server. You must then add the registered remote Docker host to your project before you can run tests on the remote Docker host location.
- Management of remote Kubernetes clusters
  You can find information about the tasks that you can perform on remote Kubernetes clusters. After you set up a remote Kubernetes cluster, you can register the external cluster with a team space on HCL OneTest™ Server. You must then add the remote cluster to a project before you run test assets or resources on the remote Kubernetes cluster.
- Test run configurations
  You can configure and run tests in HCL OneTest™ Server after you add the test resources to your project in your team space.
- Configuration of a scan of an application code
  You can use HCL OneTest™ Server to scan your application code for security vulnerabilities similar to using the HCL AppScan CodeSweep plugin to scan code in Visual Studio.
- Management of running tests
  Find information about the tasks that you can perform on a test that you configured for a run either while it runs or after it completes the run.
- Management of virtualized services
  You can find information about the tasks that you can perform on and manage the virtualized services that run on HCL OneTest™ Server. You can start or stop the virtual services that are connected to HCL OneTest Server. You can view the routing rules and usage statistics of virtualized services, agents, or intercepts that are connected to HCL OneTest Server.
- Test results
  After the tests, Suites, or schedules are run and completed, you can view the results and open the reports in HCL OneTest™ Server to analyze the verdict, the performance, and statistics. You can also re-execute tests and schedules from the Result page with the same commit id.
- Resource monitoring
  When you apply load to a system under test, the amount of resources consumed by your system is increasing. If the capacity of the resources does not match the load, you can see performance issues in the results. Resource monitoring in HCL OneTest™ Server helps you monitoring the resources of a system and establish the performance metrics and usage data of the system. Thus, you can observe the health of these resources while a schedule is running.
- Configuration of a change management system
  When you use any application to create and track defects (bugs), issues, or other work items, you can configure the application as a change management system on HCL OneTest™ Server. You can then create defects (bugs), issues, or other work items without the need to open your application.
- Integrating with other applications
  You can integrate certain applications with HCL OneTest™ Server to run tests, view the test results, and create defects.
- Managing access to the server
  Desktop clients and third-party integrations use offline user tokens to connect to HCL OneTest™ Server.
Test Manager Guide
This guide describes how to manage and track your overall test effort. This guide is intended for test managers.
Reference Guide
This guide describes conceptual information about data design environment components when you want to use the data fabrication feature in HCL OneTest™ Server.
Troubleshooting
This guide describes how to analyze and resolve some of the common problems that you might encounter while you work with HCL OneTest™ Server.
All Guides (PDF)
You can find the link to view or download the content of the release notes, system requirements, and persona guides of HCL OneTest™ Server as a PDF file.
Security Considerations
This document describes the actions that you can take to ensure that your installation is secure, customize your security settings, and set up user access controls.
Notices
This document provides information about copyright, trademarks, terms and conditions for the product documentation.

Associating resources with components

After creating components in the system model, you can navigate to a project in the team space to associate the Suites and Tests or virtual services resources in the project repositories with the components in the system model.

Before you begin

You must have created components.
You must be a member of the project that contains the Suites and Tests or virtual service resources.

Procedure

Click Projects.

The Projects page is displayed.
Click the project that contains the Suites and Tests or virtual service resources that you want to associate with components.
Click System Model.
Click the component that you want to associate with the Suites and Tests or virtual services resources.

The component details are displayed in the right pane.
Click the Associate tab.
The associated resources are displayed. To associate more resources, click the Add association icon next to the resource type.
Note: Click the Add button to associate resources with the component for the first time.
To associate a resource with a component for the first time, you must perform the following steps:
1. Click Add.
  A drop-down list is displayed.
2. Select one of the following resource types:
  
  Suites and Tests: Click this option if you want to associate your component with the different types of test suites.
  
  Virtual Services: Click this option if you want to associate your component with the virtual service resources.
  The Associate Assets page is displayed.
  Notes:
  
  You can view all the available resources of Suites and Tests or virtual services by selecting the Suites and Tests and Virtual Resources check boxes.
  
  You can use the Search field to search for virtual service resources by entering the name of the Suites and tests or virtual service resources.
3. Select one or more resources that you want to associate, and then click Add.
  The added resources are displayed in the Associate and Overview tabs of the component.
Optional: Associate more resources by clicking the Add association icon next to the resource type.

Results

You have associated components with the Suites and Tests or virtual service resources.