Welcome
Test Execution Specialist Guide
This guide describes tasks that you must complete before you can configure and run tests in HCL OneTest™ Server. You can find information about configuring runs for the different test types that are supported. You can also find information about other tasks that you can perform on the Resource Monitoring Service, Virtualization, and Integrations with third-party applications. This guide is intended for testers or test execution specialists.
Managing Docker hosts
You can find information about the tasks that you can perform on remote Docker hosts. After you set up a remote Docker host, you can register the Docker host with HCL OneTest™ Server. You must add the registered remote Docker host to your project before you can run tests on the remote Docker host location.
Deleting a remote Docker
You can delete a remote Docker host that you added to your project in HCL OneTest™ Server when you no longer need it to run tests.

Release Notes
This document includes information about What’s new, installation and upgrade instructions, known issues, and contact information of HCL Customer Support.
System Requirements
This document includes information about hardware and software requirements for HCL OneTest™ Server.
Getting Started Guide
This guide provides an overview and describes the task flows to get you started with HCL OneTest™ Server. This guide is intended for new users.
Administrator Guide
This guide describes how to install HCL OneTest™ Server software. After you install the software, you can perform administration tasks such as license configuration, user management, security, memory, and disk usage management, back up and restore user data. This guide is intended for administrators.
Test Author Guide
This guide describes how to create test assets in HCL OneTest™ Server and publish test assets to the Git repository that you have configured. This guide is intended for testers and test managers.
Test Execution Specialist Guide
This guide describes tasks that you must complete before you can configure and run tests in HCL OneTest™ Server. You can find information about configuring runs for the different test types that are supported. You can also find information about other tasks that you can perform on the Resource Monitoring Service, Virtualization, and Integrations with third-party applications. This guide is intended for testers or test execution specialists.
- System modeling
  In this topic, you can find information about using the system model feature. You can also find the tasks that you can perform to create a system model. You must configure a repository to save the system model that you created for the application under test.
- Prerequisites to running tests
  Before you can configure and run a test in a project on HCL OneTest™ Server, you must read the information about the different tests. You might want to add a remote static agent or a remote Docker host to the project as an alternate location to run the tests.
- Agents overview
  You can find information about the agents that you must install on remote computers and configure the agents with the offline user token so that the agents register with HCL OneTest™ Server. After the agents are registered, you can add them to your projects and then select them as locations to run tests.
- Managing Docker hosts
  You can find information about the tasks that you can perform on remote Docker hosts. After you set up a remote Docker host, you can register the Docker host with HCL OneTest™ Server. You must add the registered remote Docker host to your project before you can run tests on the remote Docker host location.
  - Test run considerations for running tests on remote Docker hosts
    Before you can configure a test to run on a remote Docker host, you must read the considerations that you must take into account.
  - Setting up a remote Docker host
    You must set up a computer to host the remote Docker host. You can set up the remote host with a non-secure mode of connection with HCL OneTest™ Server.
  - Setting up a secure remote Docker host
    You must set up a computer to host the remote Docker host. You can set up the remote host with a secure mode of connection with HCL OneTest™ Server by using certificates issued by the remote host computer that authenticate the connection.
  - Copying third-party application Jars to a remote Docker host
    You can run API Suites in a project on HCL OneTest™ Server on a remote Docker host. If the API Suites use a transport and the transport requires third-party Jar files for a successful run, you must ensure that the third-party application Jar files are available at the test run time. To achieve this, you must copy the third-party application Jar files to the computer where you have set up the remote Docker host.
  - Registering a remote Docker
    You must register the remote Docker host with HCL OneTest™ Server before you add the remote Docker host to your project, which contains the test assets that you want to run on the remote Docker host.
  - Viewing remote Docker hosts that are registered with HCL OneTest™ Server
    You must register the remote Docker host with HCL OneTest™ Server before you add the remote Docker host to your project, which contains the test assets that you want to run on the remote Docker host.
  - Adding a remote Docker host
    You can choose to run tests on Docker hosts that you have set up on remote host computers. You must register the Docker host with HCL OneTest™ Server and then add them to your project before you run tests on the remote Docker hosts.
  - Editing configurations
    You can edit the host name or the port of the registered Docker host computer instead of registering it as a new remote host if any of the parameters are changed on the remote host computer. You can also change the mode of authentication of a registered remote Docker host.
  - Deleting a remote Docker
    You can delete a remote Docker host that you added to your project in HCL OneTest™ Server when you no longer need it to run tests.
  - Unregistering a remote Docker host from HCL OneTest™ Server
    You can unregister a remote Docker host that is registered with HCL OneTest™ Server when you no longer require it.
- Test run configurations
  You can configure and run tests in HCL OneTest™ Server after you add the test resources to your project.
- Management of running tests
  Find information about the tasks that you can perform on a test that you configured for a run either while it runs or after it completes the run.
- Management of virtualized services
  You can find information about the tasks that you can perform on and manage the virtualized services that run on HCL OneTest™ Server. You can start or stop the virtual services that are connected to HCL OneTest Server. You can view the routing rules and usage statistics of virtualized services, agents, or intercepts that are connected to HCL OneTest Server.
- Test results
  After the tests or schedules are run and completed, you can view the results and reports in HCL OneTest™ Server to analyze the verdict, the performance, and statistics. You can also re-execute tests and schedules from the Result page with the same commit id.
- Resource Monitoring service
  When you apply load to a system under test, the amount of resources consumed by your system is increasing. If the capacity of the resources does not match the load, you can see performance issues in the results. The Resource Monitoring service in HCL OneTest™ Server helps you monitoring the resources of a system and establish the performance metrics of the system. Thus, you can observe the health of these resources while a schedule is running.
- Configuration of a change management system
  When you use any application to create and track defects (bugs), issues, or other work items, you can configure the application as a change management system on HCL OneTest™ Server. You can then create defects (bugs), issues, or other work items without the need to open your application.
- Integrating with other applications
  You can integrate certain applications with HCL OneTest™ Server to run tests, view the test results, and create defects.
- Managing access to the server
  Desktop clients and third-party integrations use offline user tokens to connect to HCL OneTest™ Server.
Test Manager Guide
This guide describes how to manage and track your overall test effort. This guide is intended for test managers.
Reference Guide
This guide describes conceptual information about data design environment components when you want to use the data fabrication feature in HCL OneTest™ Server.
Troubleshooting Guide
This guide describes how to analyze and resolve some of the common problems that you might encounter while you work with HCL OneTest™ Server.
All Guides (PDF)
You can find the link to view or download the content of the release notes, system requirements, and persona guides of HCL OneTest™ Server as a PDF file.
Security Considerations
This document describes the actions that you can take to ensure that your installation is secure, customize your security settings, and set up user access controls.
Notices
This document provides information about copyright, trademarks, terms and conditions for the product documentation.

Removing a remote Docker host from a project

You can delete a remote Docker host that you added to your project in HCL OneTest™ Server when you no longer need it to run tests.

Before you begin

You must have completed the following tasks:

Set up the remote Docker host computer. See Setting up a remote Docker host computer or Setting up a secure remote Docker host computer.
Registered the remote Docker host with HCL OneTest™ Server. See Registering a remote Docker host with HCL OneTest Server.
Added the registered Docker host to a project. See Adding a remote Docker host to the project for running tests.

Procedure

Log in to HCL OneTest™ Server.

The My Projects page is displayed.
Click Manage > Infrastructure in the navigation pane.

The Infrastructure page is displayed.

You can view the agents, intercepts or Dockers that are added to your project.
You can view the Dockers that you own in any of the following ways:
- Search for the Docker by entering the name of the Docker host in the Search field.
  Note: You can enter either the full name or any text that is in the name. The search is enabled for case sensitive text that you can enter.
- Sort the Type column to sort the items and then identify the Docker by the name displayed.
- Sort the Agents column to sort the items and identify the Docker by the owner.
You can view the following details about the Dockers that are registered with HCL OneTest™ Server:
- The projects to which the Docker host is added, are displayed in the Projects column.
- The status of the Docker host is displayed in the Status column.
Identify the Docker host that you want to delete, and then click the Remove docker host icon .

Note: The icon is displayed in the Actions column in the row of the Docker only if you own the remote Docker host.

A message is displayed that the Docker host is removed from the project successfully.

Results

You have deleted the remote Docker host from your project. The remote Docker host is no longer available as a location while configuring a test run in your project.

What to do next

You might have to add a remote Docker host to your project to use the remote Docker host as a location to run tests.