Welcome
Test Execution Specialist Guide
This guide describes tasks that you must complete before you can configure and run tests in HCL OneTest™ Server. You can find information about configuring runs for the different test types that are supported. You can also find information about other tasks that you can perform on the Resource Monitoring Service, Virtualization, and Integrations with third-party applications. This guide is intended for testers or test execution specialists.
Agents overview
You can find information about the agents that you must install on remote computers and configure the agents with the offline user token so that the agents register with HCL OneTest™ Server. After the agents are registered, you can add them to your projects and then select them as locations to run tests.
Working with agent capabilities
When you have installed static agents V10.1.2 or later, and added them to your project, you can view capabilities of the agents from the Infrastructure page. When you have installed static agents V10.1.3 or later, you can add, view, edit, or delete capabilities of agents from the User Defined panel of that agent.

Release Notes
This document includes information about What’s new, installation and upgrade instructions, known issues, and contact information of HCL Customer Support.
System Requirements
This document includes information about hardware and software requirements for HCL OneTest™ Server.
Getting Started Guide
This guide provides an overview and describes the task flows to get you started with HCL OneTest™ Server. This guide is intended for new users.
Administrator Guide
This guide describes how to install HCL OneTest™ Server software. After you install the software, you can perform administration tasks such as license configuration, user management, security, memory, and disk usage management, back up and restore user data. This guide is intended for administrators.
Test Author Guide
This guide describes how to create test assets in HCL OneTest™ Server and publish test assets to the Git repository that you have configured. This guide is intended for testers and test managers.
Test Execution Specialist Guide
This guide describes tasks that you must complete before you can configure and run tests in HCL OneTest™ Server. You can find information about configuring runs for the different test types that are supported. You can also find information about other tasks that you can perform on the Resource Monitoring Service, Virtualization, and Integrations with third-party applications. This guide is intended for testers or test execution specialists.
- System modeling
  In this topic, you can find information about using the system model feature. You can also find the tasks that you can perform to create a system model. You must configure a repository to save the system model that you created for the application under test.
- Prerequisites to running tests
  Before you can configure and run a test in a project on HCL OneTest™ Server, you must read the information about the different tests. You might want to add a remote static agent or a remote Docker host to the project as an alternate location to run the tests.
- Agents overview
  You can find information about the agents that you must install on remote computers and configure the agents with the offline user token so that the agents register with HCL OneTest™ Server. After the agents are registered, you can add them to your projects and then select them as locations to run tests.
  - Test run considerations for running tests on remote agents
    Before you configure a test to run on a remote agent from HCL OneTest™ Server, you must read the considerations that you must take into account.
  - Viewing agents that are registered with HCL OneTest™ Server
    After you install the remote agents and configure them with your offline user token, the agents register with HCL OneTest™ Server and you can view the registered agents on the Agents and Intercepts page.
  - Adding an agent to a project
    If you have performance tests that distribute workload across different workstations or Accelerated Functional Testing (AFT) Suites that need to run on different platforms and browsers, you can add HCL OneTest™ Performance Agents to your projects to run tests on remote workstations.
  - Working with agent capabilities
    When you have installed static agents V10.1.2 or later, and added them to your project, you can view capabilities of the agents from the Infrastructure page. When you have installed static agents V10.1.3 or later, you can add, view, edit, or delete capabilities of agents from the User Defined panel of that agent.
- Managing Docker hosts
  You can find information about the tasks that you can perform on remote Docker hosts. After you set up a remote Docker host, you can register the Docker host with HCL OneTest™ Server. You must add the registered remote Docker host to your project before you can run tests on the remote Docker host location.
- Test run configurations
  You can configure and run tests in HCL OneTest™ Server after you add the test resources to your project.
- Management of running tests
  Find information about the tasks that you can perform on a test that you configured for a run either while it runs or after it completes the run.
- Management of virtualized services
  You can find information about the tasks that you can perform on and manage the virtualized services that run on HCL OneTest™ Server. You can start or stop the virtual services that are connected to HCL OneTest Server. You can view the routing rules and usage statistics of virtualized services, agents, or intercepts that are connected to HCL OneTest Server.
- Test results
  After the tests or schedules are run and completed, you can view the results and reports in HCL OneTest™ Server to analyze the verdict, the performance, and statistics. You can also re-execute tests and schedules from the Result page with the same commit id.
- Resource Monitoring service
  When you apply load to a system under test, the amount of resources consumed by your system is increasing. If the capacity of the resources does not match the load, you can see performance issues in the results. The Resource Monitoring service in HCL OneTest™ Server helps you monitoring the resources of a system and establish the performance metrics of the system. Thus, you can observe the health of these resources while a schedule is running.
- Configuration of a change management system
  When you use any application to create and track defects (bugs), issues, or other work items, you can configure the application as a change management system on HCL OneTest™ Server. You can then create defects (bugs), issues, or other work items without the need to open your application.
- Integrating with other applications
  You can integrate certain applications with HCL OneTest™ Server to run tests, view the test results, and create defects.
- Managing access to the server
  Desktop clients and third-party integrations use offline user tokens to connect to HCL OneTest™ Server.
Test Manager Guide
This guide describes how to manage and track your overall test effort. This guide is intended for test managers.
Reference Guide
This guide describes conceptual information about data design environment components when you want to use the data fabrication feature in HCL OneTest™ Server.
Troubleshooting Guide
This guide describes how to analyze and resolve some of the common problems that you might encounter while you work with HCL OneTest™ Server.
All Guides (PDF)
You can find the link to view or download the content of the release notes, system requirements, and persona guides of HCL OneTest™ Server as a PDF file.
Security Considerations
This document describes the actions that you can take to ensure that your installation is secure, customize your security settings, and set up user access controls.
Notices
This document provides information about copyright, trademarks, terms and conditions for the product documentation.

Working with agent capabilities

When you have installed static agents V10.1.2 or later, and added them to your project, you can view capabilities of the agents from the Infrastructure page. When you have installed static agents V10.1.3 or later, you can add, view, edit, or delete capabilities of agents from the User Defined panel of that agent.

Before you begin

You must have completed the following tasks:

Been assigned the Owner or Tester role in the project to which you want to add the agent.
Owned at least one agent that is not added to the project.
Installed the agent V10.1.3 or later. See Test run considerations for running tests on remote agents.
Added agents to your project. See Adding an agent to a project.

Procedure

Log in to HCL OneTest™ Server, open your project, and click Manage > Infrastructure to go to the Infrastructure page.

The agents that you added to your project are displayed.
Expand the agent.

The Details and Capabilities tabs are displayed.
Click Capabilities to view the capabilities of the agent.
Click User Defined to view the capabilities that you can add, view, edit, or delete.

Complete the steps for the task that you want to perform as listed in the following table:


Task	Action
Adding a capability	Click Add new. Enter the name of the capability in the Name field. Enter the value of the capability in the Value field. Click Save. The capability that you add is displayed.
Viewing capabilities that you added	The User Defined Capabilities panel displays the capabilities that you have added to the selected agent.
Editing capabilities that you added	Click in the row of the capability that you want to edit. Edit the name of the capability in the Name field or the value of the capability in the Value field or edit both fields. Click OK. The updated capability of the agent is displayed.
Deleting capabilities that you added	Click in the row of the capability that you want to delete. Click Delete. The capability that you selected is deleted.

Results

You have added, viewed, edited, or deleted the capability of an agent.

What to do next

You can run the tests on the agent from the Execution page. See Test run configurations.