Hardware requirements
The following are the hardware requirements for Unica Discover Network Capture Application.
Recommended requirements
Note: The following recommendations apply to DNCA version 12.1.0 and later.
Discover recommends the following hardware for installation of the Unica Discover Network Capture Application:
- Dual processor, quad core: Intel™ quad-core Xeon processor at 2.8 GHz or better for total of eight cores minimum
- 16 GB of RAM or better
- 3 NICs, 1 Gigabit each
- 100 GB or better SAS or SCSI hard disk drive
- 15-ms access time
- 7200-rpm drive speed
The following hardware is recommended for general software installation and machine recovery:
- CD-ROM drive
- 1.44-MB diskette drive
- second drive for capturing and storing network traffic to archives: 200 GB - 800 GB
Minimum requirements
The Discover DNCA software requires the following minimum hardware:
Note: These
are the minimum requirements for operation of the DNCA
software. They cannot accurately support the volume of data and processing
requirements for your environment. For more information about sizing
for your environment, contact Discover Professional Services.
- Dual processor, dual core: Intel dual-core Xeon processor at 2.8 GHz or better for total of four cores minimum
- 8 GB of RAM or better
- 3 NICs, 1 Gigabit each
- 100 GB or better SAS or SCSI hard disk
- 15-ms access time
- 7200-rpm drive speed