UCM_TRANSFER_RATE_SAMPLE_INTERVAL=5 |
Use this setting to investigate delays and slow
traffic. A value of 5 samples the transfer rates of all Sametime TCP connections every 5 seconds. Set
the value to 0 if you do not want to sample transfer rates. |
UCM_TRANSFER_RATE_TRACE_ALL_SAMPLES=1 |
Use this setting to investigate delays and slow
traffic. Set the value to 1 to print all transfer rate samples to
debug trace files. |
VPS_SERVER_TRANSFER_RATE_REPORT_FREQ=8 |
Use this setting to capture transfer rates
of server-to-server TCP connections. A value of 8 generates a report
8 times a day (every 3 hours). Reports are generated in the sametime.log file. Set
the value to 0 if you do not want to generate reports. |
UCM_DELAY_THRESHOLD=10 |
Use this setting to investigate delays. The
value is the threshold, in seconds, when data that is queued for sending
but not yet sent is reported as "delayed" in the socket layer. Set
the value to 0 if you do not want to detect delays in the socket layer. |
UCM_DELAY_SNIFF=0 |
This setting is useful only in a few special
cases. The recommended setting is 0. If needed, set this value
to 1 to dump buffer contents to the debug trace files when a delay
is detected by UCM_DELAY_THRESHOLD. |
VP_DELAY_THRESHOLD=10 |
Use this setting to investigate delays. The
value is the threshold, in seconds, when encrypted data that is queued
for sending but not yet sent is reported as "delayed" in the encryption
layer. Set the value to 0 if you do not want to detect delays
in the encryption layer. |
VP_DELAY_SNIFF=0 |
This setting is useful only in a few special
cases. The recommended setting is 0. If needed, set this value
to 1 to dump buffer contents to the debug trace files when a delay
is detected by VP_DELAY_THRESHOLD. |