Change the defined port settings on an IBM® WebSphere® proxy
server used by an IBM Sametime® cluster.
About this task
If any of the WebSphere proxy
server's port settings are incorrect, change it to the correct
value.
Procedure
- On the node where WebSphere proxy
server is running, log in to the Integrated Solutions Console as the WebSphere administrator.
- Click .
- In the list of proxy servers, click the node's WebSphere
proxy server to open its Configuration page.
- In the "Communications" section, click Ports.
- Use the Ports table to change the SIP ports as follows:
Note: If there is a requirement to use non-secure port 5060
and secure port 5061 for the Sametime SIP Proxy/Registrar,
assign those ports to the WebSphere SIP proxy. Assign non-secure port
5062 and secure port 5063 to the Sametime SIP Proxy/Registrar
servers. In this case, ensure there are no other applications using
those ports on that server, for example, a Conference Manager.
- Click on the PROXY_SIP_ADDRESS link,
change its setting (for example, to
5060
), and then
click OK.
- Click on the PROXY_SIPS_ADDRESS link,
change its setting (for example, to
5061
), and then
click OK.
- Save the changes by clicking the Save link
in the "Messages" box at the beginning of the page.