Defining global Video MCU settings
Specify a set of global IBM® Sametime® Video MCU settings to apply to all Video MCUs that are managed by a single IBM Sametime Video Manager Server.
Procedure
- Log in to the IBM WebSphere® Integrated Solutions Console as the WebSphere administrator.
- Click Sametime System Console > Sametime Servers > Sametime Video MCU Servers.
- Click Video MCU global settings.
- Complete these fields:
- SIP port - Specify the preferred SIP server port.
- SIP transport - Select one of these SIP transport types: TCP, TLS, or UDP. The transport protocol determines the network transport to use for sending SIP messages.
- Media port range from - Specify the minimum media port value.
- Media port range to - Specify the maximum media port value.
- TURN server configuration - Skip this section and leave the default values.
- NAT enabled - Select this field to enable a Network Address Translator. When NAT is enabled, the TURN server host and port fields are enabled, as well as the Token enabled field.
- TURN server host - Specify the TURN server's IP address. If the Video MCU is inside a firewall, specify an internal IP address, otherwise, specify an external IP address. The TURN server's host name is not supported for this field.
- TURN server port - Specify the TURN server port number.
- Token enabled When this field is selected, the Token password field is active.
- Token password - Enter the token password.
- QoS enabled - Select this field to enable quality of service processing on audio and video data packets.
- QoS IP audio - Type the DSCP value for outgoing audio RTP packets.
- QoS IP video - Type the DSCP value for outgoing video RTP packets.
- Click OK.