Custom properties details provided by Sametime Gateway Server
Use this page to edit custom properties for a community, translation protocol, or message handler. You can also specify new properties that are needed to configure third-party elements used by the IBM® Sametime® Gateway Server.
Custom Property | Type | Name | Default value |
---|---|---|---|
Message handler | Event logger | enableContentLogging |
0 (disabled) |
Message handler | Event logger | enableImLogging |
0 (disabled) |
Message handler | Event logger | enablePresenceLogging |
0 (disabled) |
Translation protocol | SIP for Sametime Gateway Server, legacy Sametime Gateway Server, AOL, Office Communications Server | session_timeout |
3600 (seconds) |
Translation protocol | legacy Sametime Gateway Server | subscription_timeout |
3600 (seconds) |
Community | SIP for AOL | servers |
205.188.*.*, 64.12.*.* Note: If the host name
is an IPv6 - format network address, set an explicit address here;
do not use an abbreviated address (no brackets, no leading zeroes).
For example, all of these IPv6 - format network addresses are
equivalent, but only the first form is accepted:
|
Community | Local community | Sametime Gateway Server community exclusion list |
none (disabled) |
Community | Local community | server reconnection timeout |
60000 (milliseconds or 1 minute) |
Community | Local community | server reconnection attempts |
-1 (no limit) |
Community | External community | im failure message |
none (disabled) |