使用Notes ®路由來路由郵件的概述
HCL Domino ®使用Notes ®遠端程序呼叫(NRPC) 在伺服器之間傳輸郵件。HCL Notes ®路由使用Domino ®目錄中的資訊來決定將發送給給定使用者的郵件發送到何處。Notes ®路由將郵件從寄件者的郵件伺服器移至收件者的郵件伺服器。
寄件人伺服器的「路由器」會決定將訊息移至下一部的伺服器;換句話說,至訊息目的路徑的下一個「躍點」。每個伺服器使用其傳送表格,來計算在到目的端伺服器的路徑上下一個躍點。當訊息抵達目的地伺服器時,「路由器」會將它遞送到收件人的郵件檔中。
Notes ®路由如何移動訊息
當使用者傳送郵件至具有Notes ®位址的收件者(例如 Jane Doe/Renovations)時,路由器會在 mail.box 中選取一則訊息,以決定將該訊息傳送到何處。路由器首先在Domino ®目錄中尋找收件者 Jane Doe/Renovations 的個人文件。「人員」文件內有 Jane Doe 郵件伺服器的名稱。按照此資訊,「路由器」使用其網路知識 (也就是傳送表格) 以決定訊息的下一個停止點。「路由器」分派訊息的方式是依據收件人的郵件檔是否位在:
- 相同的伺服器上
- 在同一Notes ®命名網路中的不同伺服器上
- 在本機Domino ®域內不同Notes ®命名網路中的伺服器上
- 在外部Domino ®域中的伺服器上
將訊息移動至同一個伺服器上的收件人
在查詢過收件人的「人員」文件後,如果「路由器」確定收件人的郵件伺服器就是寄件人的伺服器,「路由器」便將訊息遞送到收件人郵件檔。
將訊息移到Notes ®命名網路中另一台伺服器上的收件者
如果寄件者和收件者不共用郵件伺服器,則路由器會檢查Domino ®目錄以確定伺服器是否位於同一個Domino ®網域中。
如果在 Domino ®目錄中找到了目標伺服器的伺服器文檔,路由器就會檢查該文檔以確定伺服器的網路資訊。在港口 > 伺服器文件的 標籤中,伺服器被指派給一個或多個Notes ®命名網路 (NNN)。Notes®命名網路是給定 Domino ®網域中的一組伺服器,這些伺服器共用公共協定並透過 LAN 或數據機 connections 連接。
If the two servers share a Notes® named network, the Router immediately routes the message from the mail.box file on the sender's server to the mail.box file on the recipient's server. The Router on the recipient's server then delivers the message to the recipient's mail file. Because mail routes automatically within a Notes® named network, you do not need to create any additional connections or documents.
將郵件移至同一Domino ®網域內不同 NNN 中的收件者
If the sender's and recipient's mail servers are in the same Domino® domain, but don't share either a mail server or a Notes® named network, for transfer to succeed there must be some connection between the two networks. Connections between Notes® named networks can be achieved by two means:
- Using a "bridge" server that is a member of multiple Notes® named networks
- 使用「連接」文件
當連接文件提供在 NNN 之間路由郵件的資訊時,來源網路和目標網路可以位於不同的Domino ®域中。文件包含所有「路由器」在尋找目的網路時所需的資訊。
使用「橋接」伺服器連接同一Domino ®域中的兩個網絡
Two networks in the same domain can communicate with each other in the absence of a Connection document if any one server is a member of both networks. Servers that reside in multiple networks can act as a bridge between networks running diverse protocols. For example, if you have one Notes® named network running TCP/IP and another running SPX, you can set up a server that runs both protocols to be a member of both Notes® named networks. This server acts as a bridge between the networks.
When a user in the TCP/IP network sends a message to someone in the SPX network, the Router transfers the message from mail.box on the sender's server to mail.box on this "bridge" server. After the message reaches a server in the destination Notes® named network, the Router on that server transfers the message to the mail.box on the recipient's server. The Router on the recipient's server delivers the message to the recipient's mail file.
若該伺服器間的路徑涉及多重伺服器「躍點」,則「路由器」會將訊息傳送到路徑中下一部伺服器的 mail.box 上。路徑上的每一個「路由器」均會將訊息傳送到路徑中的下一部伺服器上的 mail.box 中。
使用連接文件以連接網路與網域
當沒有共用伺服器以提供網路間的橋接器時,「路由器」需要「連接」文件在伺服器間傳送郵件。「連接」文件指定送件與收件伺服器、何時和如何連線、以及連線期間所執行的作業 ,例如抄寫與郵件傳送。連接文件中指定的來源(或傳送)伺服器和接收(或目標)伺服器可以位於同一個Domino ®網域中,也可以位於不同的Domino ®網域中。
After the Router finds a connection between the two Notes® named networks, it routes the mail to the next server along the connection path.
郵件傳送的「連線」文件會指定單向的連接,且通常會找到成對的。例如,某「連線」文件排程自「伺服器 A」到「伺服器 B」的連接,另一份「連線」文件則是排程「伺服器 B」到「伺服器 A」的連接。
將郵件移至外部Domino ®網域中的收件者
當 mail.box 中的郵件的收件者位址指向本機Domino ®網域以外的目標時,路由器會檢查Domino ®目錄中是否存在描述本機網域如何與目標網域通訊的連線文件。只要兩個網域之間存在直接實體連接,您就可以在兩個網域之間建立連接文件。
找到「連線」文件之後,「路由器」會將訊息傳送到送件人網域內與收件人網域伺服器連接的一部伺服器上。當伺服器連接上時,訊息即傳送到另一個網域,再傳送至收件人的伺服器與郵件檔。
Domino ®域之間的間接連接
在擁有三個或更多Domino ®域的組織中,您可能無法使用連接文件來連接某些域,因為網路拓撲不允許它們之間存在直接物理連接。然而,如果它們都有公用中間網域的「連線」文件,您可以經由橋接來源網域與目的網域的網域(網域群),將郵件從來源網域傳送到目的網域。例如,若「網域 A」與「網域 B」沒有任何伺服器連接,但它們都有連到「網域 C」;因此「網域 A」與「網域 B」之間的郵件,可以透過「網域 C」來傳送。
將郵件傳送給不同網域內的使用者
在Domino ®網域內發送郵件時,寄件者只需指定使用者的公用名,例如 John Smith。由於 John Smith 在與寄件者相同的Domino ®目錄中擁有一個「個人」文檔,因此路由器會在該目錄中找到 John 的條目並確定他的郵件文件的位置。但是,當向不同Domino ®網域中的使用者發送郵件時,路由器無權存取收件者的個人文檔,因為它儲存在不同的Domino ®目錄中。當郵件傳送給不同Domino ®網域中的使用者時,寄件者必須將收件者的網域附加到收件者的位址。例如,Renstores 網域中的使用者想要向 Renovations 網域中的 John Smith 發送郵件,必須將郵件傳送至 jsmith@Renovations,而不僅僅是 jsmith 或 John Smith。位址中的網域名稱指示路由器查找到該網域的連接文檔,並將訊息傳送到該文檔中指定的伺服器。
若要更容易地將郵件寄送給其他網域的使用者,使用者可以在他們的「聯絡人」中建立一個項目,用來指定收件人完整的位址;例如,jdoe@Renovations。或者,管理員可以在Domino ®目錄中建立一個條目,以在收件者個人文件的轉送位址欄位中指定收件者的位址,或使用目錄服務或目錄編目跨網域共用Domino ®目錄。