Definitions of the properties in the trc.properties file
that is packaged with the IBM® BigFix® Remote Control Server.
DO NOT EDIT THE FOLLOWING LINE
THE FOLLOWING LINES CAN BE EDITED FOR YOUR ENVIRONMENT:
rc.heartbeat_timeout=
| Modifiable Field |
rc.heartbeat_timeout |
| Field Description |
While an endpoint is active, it periodically reports
back to the server. This value is the number of minutes between each
report back to the server or heartbeat. |
| Possible Values |
User Defined |
| Value Definition |
|
rc.create.assets.from.callhome=
| Modifiable Field |
rc.create.assets.from.callhome |
| Field Description |
If target information sent from the target to the
server is not already in the database, create these targets in the
database |
| Possible Values |
true or false |
| Value Definition |
- true
- target information is added to the database.
- false
- target information is not added to the database.
|
rc.create.assets.from.brokers=
| Modifiable Field |
rc.create.assets.from.brokers |
| Field Description |
Use to allow an unregistered target to register
with the server at the start of a remote control session that uses
a broker. The target information is sent to the server when the target
user enters the connection code. |
| Possible Values |
True or False |
| Value Definition |
- True
- Unregistered targets are added to the database.
- False
- Unregistered targets are not added to the database.
|
DO NOT EDIT THE FOLLOWING LINES
rc.validation.relative.url=
rc.audit.relative.url=
rc.upload.url=
THE FOLLOWING LINES CAN BE EDITED FOR YOUR ENVIRONMENT:
rc.show.controller.splash=
| Modifiable Field |
rc.show.controller.splash |
| Field Description |
Use this property to determine whether the controller
splash screen is displayed before the remote control session starts. |
| Possible Values |
True or False |
| Value Definition |
- True
- The controller splash screen is displayed before the remote control
session starts. True is the default value.
- False
- The controller splash screen is not displayed during the initiation
of a remote control session.
|
rc.recording.directory=
| Modifiable Field |
rc.recording.directory |
| Field Description |
Directory that is used for storing session recordings
on the Server |
| Possible Values |
User-defined: for example: rc_recordings.
Can be specific or relative |
| Value Definition |
|
unknown.recording.action=
| Modifiable Field |
unknown.recording.action |
| Field Description |
Determines what action is returned to the target
if a target requests to upload a recording for a session that is not
known to the server. |
| Possible Values |
0, 1, 2 |
| Value Definition |
- 0
- The target can upload the recording.
- 1
- The target must keep the recording locally in its file system.
- 2
- The target must delete the recording.
|
rc.dialog.session.accept.directory=
| Modifiable Field |
rc.dialog.session.accept.directory |
| Field Description |
Directory that is used for storing bitmap files
that are uploaded when you configure the session acceptance window. |
| Possible Values |
User-defined: for example: /sad_config.
Can be specific or relative |
| Value Definition |
|
DO NOT EDIT THE FOLLOWING LINE:
Category Description: Email Settings
email.enabled=
| Modifiable Field |
email.enabled |
| Field Description |
Enable the email function. |
| Possible Values |
True or False |
| Value Definition |
- True
- email is enabled.
- False
- email is not enabled.
|
smtp.server=
| Modifiable Field |
smtp.server |
| Field Description |
The address of the SMTP server you are using for
email. |
| Possible Values |
User-defined - for example: myserver.email.com |
| Value Definition |
|
smtp.authentication=
| Modifiable Field |
smtp.authentication |
| Field Description |
The SMTP server must authenticate the SMTP user
ID and password. |
| Possible Values |
True or False |
| Value Definition |
- True
- SMTP server must authenticate the user ID and password.
- False
- SMTP server does not authenticate the user ID and password.
|
smtp.userid=
| Modifiable Field |
smtp.userid |
| Field Description |
The user ID for the SMTP server. |
| Possible Values |
User-defined string |
| Value Definition |
|
smtp.password=
| Modifiable Field |
smtp.password |
| Field Description |
The password for the SMTP server. |
| Possible Values |
User-defined |
| Value Definition |
|
error.admin.contact=
| Modifiable Field |
error.admin.contact |
| Field Description |
Details or relevant message for contacting an administrator
to report a problem. |
| Possible Values |
User-defined message. For example: Contact helpdesk
on 123456-123-123 |
| Value Definition |
|
file.email.name =
| Modifiable Field |
file.email.name |
| Field Description |
Default file name that is used when a report is
mailed out. For example, Selecting Email Report from
the Options menu. The report is exported into
a CSV file with this file name and attached to the email. |
| Possible Values |
User-defined - for example: report.csv. |
| Value Definition |
Must not be blank and must contain only characters
that are valid for a file name. |
file.email.mime.type =
| Modifiable Field |
file.email.mime.type |
| Field Description |
Represents the mime type for the file that is attached
to an email when a report is mailed out. |
| Possible Values |
User-defined - for example: application/vnd.ms.excel. |
| Value Definition |
User-defined; default is application/vnd.ms.excel.
Must be a mime-type that is compatible only with plain-text or comma-separated
value (CSV) files. |
file.email.encoding =
| Modifiable Field |
file.email.encoding |
| Field Description |
Represents the encoding for the file that is attached
to an email when a report is mailed out. |
| Possible Values |
UTF-8, UTF-16BE, UTF16LE |
| Value Definition |
Default value is UTF16LE (Windows™ standard for Excel) |
file.email.type =
| Modifiable Field |
file.email.type |
| Field Description |
Represents the type for the file that is attached
to an email when a report is mailed out. |
| Possible Values |
TSV, CSV |
| Value Definition |
User-defined. TSV (Tab Separated Value), CSV (comma-separated
value). |
Category Description: Email Templates
url=
| Modifiable Field |
url |
| Field Description |
The main URL users use to access the IBM BigFix Remote Control Server UI. |
| Possible Values |
User-defined - for example http://192.0.2.0/trc |
| Value Definition |
User-defined. URL and context root of application. |
secure.url=
| Modifiable Field |
secure.url |
| Field Description |
Determines the base url that is used to redirect
requests when secure communications are required. |
| Possible Values |
User-defined - for examplehttps://X.X.X.X/trc where X.X.X.X is
the IP address of your IBM BigFix Remote Control Server. Note: The url property
must also be configured. Do not replace http with https in the url property
because the ports for each might be different. |
| Value Definition |
User-defined. URL and context root of application
when you use secure connections. |
enforce.secure.web.access=
| Modifiable Field |
enforce.secure.web.access |
| Field Description |
An HTTP request that is not a target request. The
upload, or validation request is redirected to the same URL but uses
the value that is set in the secure.url parameter
as a base. |
| Possible Values |
True or False |
| Value Definition |
- True
- The http request is redirected to the secure url.
- False
- The http request is not redirected to the secure url.
Note: When you change the value of this property,
you must restart the IBM BigFix Remote Control Server service
for the new value to take effect. |
enforce.secure.endpoint.callhome=
| Modifiable Field |
enforce.secure.endpoint.callhome |
| Field Description |
Determines the url that is used by targets when
they send information to the IBM BigFix Remote Control Server. |
| Possible Values |
True or False |
| Value Definition |
- True
- If an HTTP request is received from a target, the request is redirected
to the secure url. The secure url is also returned in the response
form the server. Forces targets to use the secure url when they contact
the IBM BigFix Remote Control Server.
When you enable this property and you configure a broker in your environment,
you must set the ServerURL parameter in the broker
properties file to HTTPS. Otherwise, the broker does not redirect
to the secure url and the target cannot send information to the server.
- False
- Targets are not forced to use the secure url when they contact
the IBM BigFix Remote Control Server.
False is the default value.
Note: When you change the value of this property,
you must restart the IBM BigFix Remote Control Server service
for the new value to take effect. |
enforce.secure.endpoint.upload=
| Modifiable Field |
enforce.secure.endpoint.upload |
| Field Description |
Determines whether the controller or target must
use the secure url to upload the recordings and audit information
to the server. |
| Possible Values |
True / False |
| Value Definition |
- True
- If an HTTP upload or a validation request is received, the server
redirects the request to an equivalent URL. The URL is built with
the value that is defined in secure.url as a
base. The server also uses the value of secure.url as
a base to provide the upload and validation URLs to the controller
and target when the session starts. When you enable this property
and you configure a broker in your environment, you must set the ServerURL parameter
in the broker properties file to HTTPS. Otherwise, the broker does
not redirect to the secure url and the target cannot send information
to the server.
- False
- If an HTTP upload or a validation request is received, the server
does not redirect to the secure url.
Note: When you change the value of this property,
you must restart the IBM BigFix Remote Control Server service
in order for the new value to take effect. |
enforce.secure.weblogon=
| Modifiable Field |
enforce.secure.weblogon |
| Field Description |
Forces the default logon from the server UI to
use https. This property requires secure.url to
be set with the full host name. |
| Possible Values |
True / False |
| Value Definition |
- True
- Log on requests from the IBM BigFix Remote Control Server UI
use HTTPS. HTTPS is not shown in the url, but the logon page with
USERID/PASSWORD is posted by using HTTPS. The URL that is defined
in the secure.url parameter is used. If secure.url is
set incorrectly, the logon does not succeed. Enabling this parameter
does not prevent a logon request that uses HTTP through another tool
or page.
- False
- Log on by using HTTP or HTTPS. Whichever protocol that is used
in the URL that is entered in the browser is used.
|
enforce.secure.alllogon=
| Modifiable Field |
enforce.secure.alllogon |
| Field Description |
Force any logon action to use HTTPS, deny any non-HTTPS
logon. When you enable this property, you must set secure.url with
the full host name. |
| Possible Values |
True / False |
| Value Definition |
- True
- Any logon attempt that uses HTTP is rejected and redirected to
the logon page.
- False
- Log on by using HTTP or HTTPS. Whichever protocol that is used
in the URL that is entered in the browser is used.
|
account.lockout=
| Modifiable Field |
account.lockout |
| Field Description |
Lock a user account after a consecutive number
failed logon attempts. Set to 0 to disable this function. |
| Possible Values |
user defined |
| Value Definition |
User-defined. integer. |
account.lockout.timeout=
| Modifiable Field |
account.lockout.timeout |
| Field Description |
If user account is locked out due to consecutive
failed logon attempts, re-enable the account after this time. The
period can be MIN, HOUR, DAY, MONTH. Note: This property is only
valid when account.lockout is enabled. |
| Possible Values |
User-defined |
| Value Definition |
User-defined. MIN, HOUR, DAY, MONTH. For example,
set to 5MIN means that the account is locked for
5 minutes. Set to 2DAY means that the account is
locked for 2 days. Note: If left blank, the account is locked until
manually set. |
account.lockout.allowlogonfrom=
| Modifiable Field |
account.lockout.allowlogonfrom |
| Field Description |
Use this property to allow users to log on from
this host even if their account is locked out due to consecutive failed
logon attempts. If your account is locked, you can log on to the IBM BigFix Remote Control Server from
the computers whose IP address is listed. For example: 192.0.2.1;192.0.2.2; Note: It
is important to end each host name with a semi-colon. |
| Possible Values |
User-defined - |
| Value Definition |
User-defined. A list of IP addresses separated
by a semi-colon. End the list with a semi-colon. |
account.lockout.reset.on.emailpassword=
| Modifiable Field |
account.lockout.reset.on.emailpassword |
| Field Description |
Determines whether a locked account is reset when
the user selects the forgotten password check box on the logon screen. |
| Possible Values |
True / False |
| Value Definition |
- True
- The locked account is reset when the password reset email is received
from the administrator.
- False
- The locked account is not reset when the forgotten password request
is received.
Note: As this property uses the forgotten password
feature, email must be enabled in the system. |
email.from=
| Modifiable Field |
email.from |
| Field Description |
The email address to which users respond when they
receive email requests; in some cases, this email address might be
the same as the administrators email address. |
| Possible Values |
User-defined - for example: trc@example.com |
| Value Definition |
Email address |
email.admin=
| Modifiable Field |
email.admin |
| Field Description |
The email address of the administrator for reporting
problems to. |
| Possible Values |
User-defined: for example, admin@example.com |
| Value Definition |
Email address |
DO NOT EDIT THE FOLLOWING LINES
task.use.other.threads.queue.limit =
http =
audit.relative.url =
upload.relative.url=
addasset.relative.url=
call.home.relative.url=
oms.relative.url=
call.home.command.parameters=
match.on.assettag =
match.on.computername.if.valid.serial.or.uuid.stored =
THE FOLLOWING LINES CAN BE EDITED FOR YOUR ENVIRONMENT:
| Modifiable Field |
queue.processors |
| Field Description |
Number of processors (CPUs) in the system that
is running the IBM BigFix Remote Control Server Used
to determine the number of working threads that can be used by the IBM BigFix Remote Control Server program. |
| Possible Values |
User-defined |
| Value Definition |
User-defined integer |
DO NOT EDIT THE FOLLOWING LINES
queue.max.length =
serialised.queue.object=
row.sample =
character.width =
max.column.character.width =
min.table.character.width =
YOU CAN EDIT THE FOLLOWING FIELD:
| Modifiable Field |
use.scrollable.table |
| Field Description |
Determine whether you can scroll the results table. |
| Possible Values |
True or False. |
| Value Definition |
- True
- you can scroll the table.
- False
- you cannot scroll the results table.
|
DO NOT EDIT THE FOLLOWING LINES
max.retries=
default.query=
default.pagerows=
query.authorised.queries=
all.users.query=
all.other.users.query=
all.groups.query=
selected.user.query=
selected.users.query=
selected.asset.query=
user.search.query=
asset.search.query=
selected.email.query=
scheduled.task.query=
task.list.query=
all.tasks=
report.list.query=
menu.links.query=
menu.actions.query=
menu.tasks.query=
menu.static.links.query=
menuscheduled.task.log.query=
attachments.query=
query.latest.unprocessed.revision=
query.all.unprocessed.revisions=
query.asset.count=
query.processed.incorrectly=
query.selected.task=
query.all.xml.revisions=
query.users.assets=
query.user.queries=
query.asset.queries=
query.unknown.pc.serial=
query.uploads.in.period.defined=
query.average.upload.time=
query.unprocessed.security.assets=
query.new.assets.in.period.defined=
query.average.process.time=
query.processed.in.period.defined=
query.selected.user.custom.query=
query.all.custom.query=
query.selected.users.groups=
query.unprocessable.pc.assets.count=
query.menu.static.items=
search.limit.results =
max.keys =
Category Description: Action Authority Settings
DO NOT EDIT THE FOLLOWING LINES update.password.auth=
update.details.auth=
change.asset.owner.auth=
add.user.auth=
all.user.auth=
all.asset.auth=
all.custom.reports.auth=
query.builder.auth=
search.auth=
task.auth=
reprocess.auth=
group.auth=
view.group.auth=
delete.user.auth=
email.report.authority=
edit.printer.auth=
user.skill.auth=
add.ticket.auth=
edit.ticket.auth=
setup.ticket.auth=
edit.table.auth=
edit.probeset.auth=
edit.po.auth=
rc.auth=
asset.revisions =
asset.keep.baseline=
THE FOLLOWING LINE CAN BE EDITED FOR YOUR ENVIRONMENT:
| Modifiable Field |
delete.target.auth |
| Field Description |
Determines what level of access is required to
delete a target when you use the Delete Target action. |
| Possible Values |
U, S, A |
| Value Definition |
- U
- User authority.
- S
- Super User authority.
- A
- Administrator authority. This value is the default value.
Note: If you change the value of this property, you
must restart the server service for the new value to take effect. |
| Modifiable Field |
browse.targets.auth |
| Field Description |
Determines which levels of user authority sees
the Browse option that is displayed in the Targets menu. |
| Possible Values |
U, S, A |
| Value Definition |
- U
- User authority. All user authorities see the Browse option
in the Targets menu. This value is the default
value.
- S
- Super User authority. Only Super Users and Admin users see the Browse option
in the Targets menu.
- A
- Administrator authority. Only Admin users see the Browse option
in the Targets menu.
Note: If you change the value of this property, you
must restart the server service for the new value to take effect. |
| Modifiable Field |
view.all.targets.auth |
| Field Description |
Determines which levels of user authority see the All
targets option that is displayed in the Targets menu. |
| Possible Values |
U, S, A |
| Value Definition |
- U
- User authority. All user authorities see the All targets option
in the Targets menu. This value is the default
value.
- S
- Super User authority. Only Super Users and Admin users see the All
targets option in the Targets menu.
- A
- Administrator authority. Only Admin users see the All
targets option in the Targets menu.
Note:
- If you change the value of this property, you must restart the
server service for the new value to take effect.
- If the home page of a user is set to the All targets report,
their authority to view the report is determined by the value of view.all.targets.auth.
If they do not have authority to view All targets, the Search
targets page is displayed.
- If you set view.all.targets.auth to S or A,
you must set target.search.minimum.nonwildcards to
greater than 1. Otherwise, users with user authority can use the search
targets page to display all of the targets.
|
search.session.history.auth=
| Modifiable Field |
search.session.history.auth |
| Field Description |
Determines which levels of user authority sees
the Search option that is displayed in the Sessions menu. |
| Possible Values |
U, S, A |
| Value Definition |
- U
- User authority. All user authorities see the Search option
in the Sessions menu. This value is the default
value.
- S
- Super User authority. Only Super Users and Admin users see the Search option
in the Sessions menu.
- A
- Administrator authority. Only Admin users see the Search option
in the Sessions menu.
Note: If you change the value of this property, you
must restart the server service for the new value to take effect. |
Category Description: Schedules
DO NOT EDIT THE FOLLOWING LINES
scheduled.upload=
update.client.files=
scheduled.upload.interval=
scheduled.upload.queue.threshold=
scheduled.upload.queue.lookup.threshold=
scheduled.update.demographics=
scheduled.demographics.check.interval=
get.application.files.relative.url=
changed.software.upload =
changed.hardware.upload =
scheduled.launch.on.startup=
YOU CAN EDIT THE FOLLOWING LINES
Category Description - LDAP synchronization task
| Modifiable Field |
scheduled.interval |
| Field Description |
The frequency in numeric value that the server
must check for scheduled tasks. |
| Possible Values |
User-Defined |
| Value Definition |
User-Defined. Positive Integer Note: If you change
the value of this property, you must restart the server service for
the new value to take effect. |
scheduled.interval.period=
| Modifiable Field |
scheduled.interval.period |
| Field Description |
The unit of time in which the server must check
for scheduled tasks. |
| Possible Values |
minutes or hours or days |
| Value Definition |
Minutes or Hours or Days |
| Modifiable Field |
scheduled.task.period |
| Field Description |
The interval units to be used when scheduling tasks. |
| Possible Values |
minutes or hours or days |
| Value Definition |
Minutes or Hours or Days |
DO NOT EDIT THE FOLLOWING LINES
scheduler.use.queue=
task.process.xml.max.queue.length=
task.process.files.max.queue.length=
task.process.filescan.max.queue.length=
task.process.software.security.length=
YOU CAN EDIT THE FOLLOWING LINES
DBCleaner is a looping utility that
is used to clean up older log files that are based on age of entries
(in days). Frequency is in days. To disable cleaning, set the value
to -1.
dbcleaner.launch.on.startup=
| Modifiable Field |
dbcleaner.launch.on.startup |
| Field Description |
Start dbCleaner when the
server application starts. |
| Possible Values |
1 or 0 |
| Value Definition |
1 to start dbCleaner. 0, do
not start dbCleaner. |
| Modifiable Field |
dbcleaner.frequency |
| Field Description |
Frequency the DBCleaner runs at in days |
| Possible Values |
set to -1 to disable cleaning |
| Value Definition |
User-Defined - number of days |
dbcleaner.interval.period=
| Modifiable Field |
dbcleaner.interval.period |
| Field Description |
Period the database logs are cleaned |
| Possible Values |
User-Defined. for example: mins,
or hours, or days, or months |
| Value Definition |
User-Defined - number of days |
| Modifiable Field |
server.log.max.age |
| Field Description |
Maximum age of entries in the server log file,
before they are deleted. |
| Possible Values |
User-Defined |
| Value Definition |
User-Defined - number of days |
DO NOT EDIT THE FOLLOWING LINE
THE FOLLOWING LINES CAN BE EDITED FOR YOUR ENVIRONMENT:
| Modifiable Field |
task.log.max.age |
| Field Description |
Maximum age of entries in the task log table before
they are deleted. |
| Possible Values |
User-Defined |
| Value Definition |
User-Defined - number of days |
transfers.history.max.age=
| Modifiable Field |
transfers.history.max.age |
| Field Description |
Maximum age of entries in the transfer table before
they are deleted. |
| Possible Values |
User-Defined |
| Value Definition |
User-Defined - number of days |
| Modifiable Field |
user.access.max.age |
| Field Description |
Maximum age of entries in the access table before
they are deleted. |
| Possible Values |
User-Defined |
| Value Definition |
User-Defined - number of days |
DO NOT EDIT THE FOLLOWING LINES:
THE FOLLOWING LINES CAN BE EDITED FOR YOUR ENVIRONMENT:
Category Description: Password Settings
| Modifiable Field |
password.encrypt |
| Field Description |
Determines whether passwords are encrypted in the
database. |
| Possible Values |
Yes or No |
| Value Definition |
- Yes
- passwords are encrypted in the database.
- No
- passwords are not encrypted in the database.
|
| Modifiable Field |
password.reuse |
| Field Description |
Whether users can reuse passwords. |
| Possible Values |
Yes or No |
| Value Definition |
- Yes
- users can reuse passwords.
- No
- users cannot reuse passwords.
|
| Modifiable Field |
expire.new.password |
| Field Description |
Determines whether users are required to set their
own password after they receive the computer-generated password. |
| Possible Values |
True or False |
| Value Definition |
- True
- users must set their own password after they receive the computer-generated
password.
- False
- users do not have to set their own password after they receive
the computer-generated password.
|
| Modifiable Field |
password.timeout |
| Field Description |
Determines whether passwords expire. |
| Possible Values |
True or False |
| Value Definition |
- True
- passwords expire.
- False
- passwords do not expire.
|
| Modifiable Field |
password.timeout.period |
| Field Description |
After how many days passwords expire. |
| Possible Values |
User-defined |
| Value Definition |
User-defined integer |
| Modifiable Field |
password.period |
| Field Description |
Maximum number of days before a password can be
reused. |
| Possible Values |
User-defined |
| Value Definition |
User-defined integer |
| Modifiable Field |
password.check |
| Field Description |
Determines whether to enable password rule checking. |
| Possible Values |
True or False |
| Value Definition |
- True
- passwords must follow certain rules.
- False
- passwords do not follow rules.
|
password.must.have.non.numeric=
| Modifiable Field |
password.must.have.non.numeric |
| Field Description |
Determines whether passwords must contain non-numeric
characters. |
| Possible Values |
True or False |
| Value Definition |
- True
- passwords must contain non-numeric characters.
- False
- passwords do not need to contain non-numeric characters.
|
password.must.have.numeric=
| Modifiable Field |
password.must.have.numeric |
| Field Description |
Determines whether passwords must contain numeric
characters. |
| Possible Values |
True or False |
| Value Definition |
- True
- passwords must contain numeric characters.
- False
- passwords do not have to contain numeric characters.
|
password.must.have.non.alphanumeric=
| Modifiable Field |
password.must.have.non.alphanumeric |
| Field Description |
Whether passwords must contain non-alphanumeric
characters. |
| Possible Values |
True or False |
| Value Definition |
- True
- passwords must contain non-alphanumeric characters.
- False
- passwords do not have to contain non-alphanumeric characters.
|
| Modifiable Field |
password.min.length |
| Field Description |
Minimum length of a password. |
| Possible Values |
User-defined |
| Value Definition |
User-defined integer |
| Modifiable Field |
password.min.length |
| Field Description |
Maximum length of a password. |
| Possible Values |
User-defined |
| Value Definition |
User-defined integer |
password.max.matching.sequential.chars=
| Modifiable Field |
password.max.matching.sequential.chars |
| Field Description |
Maximum number of sequential password characters
that can match. |
| Possible Values |
User-defined |
| Value Definition |
User-defined integer |
password.max.previous.chars=
| Modifiable Field |
password.max.previous.chars |
| Field Description |
Maximum number of sequential password characters
that can be reused in a new password. |
| Possible Values |
User-defined |
| Value Definition |
User-defined integer |
password.iterationcount =
| Modifiable field |
password.iterationcount |
| Field Description |
Use to define the number of times that a password
is hashed before it is stored in the database. |
| Possible Values |
User defined. |
| Value Definition |
Default is 5000. There is no maximum value. The
higher the iteration count, the longer it takes for someone to try
to break the password. However, the larger the iteration count, the
slower it is to log on to the server or to change your password. A
higher iteration count slows the system down. Therefore you must set
it to a value that is acceptable to your environment and maintains
acceptable performance. |
DO NOT EDIT THE FOLLOWING LINE
table.column.internationalisation =
THE FOLLOWING LINES CAN BE EDITED FOR YOUR ENVIRONMENT:
csv.export.use.byte.order.mark=
| Modifiable Field |
csv.export.use.byte.order.mark |
| Field Description |
Determines whether a Unicode UTF-8 Byte Order Mark
(BOM) is included at the start of the file when you export a CSV file. |
| Possible Values |
True or False |
| Value Definition |
- True
- Include a Unicode UTF-8 Byte Order Mark (BOM).
- False
- Do not include a Unicode UTF-8 Byte Order Mark (BOM).
|
tsv.export.use.byte.order.mark=
| Modifiable Field |
tsv.export.use.byte.order.mark |
| Field Description |
Determines whether a Unicode UTF-8 Byte Order Mark
(BOM) is included at the start of the file when you export a TSV file. |
| Possible Values |
True or False |
| Value Definition |
- True
- Include a Unicode UTF-8 Byte Order Mark (BOM).
- False
- Do not include a Unicode UTF-8 Byte Order Mark (BOM).
|
edit.properties.show.file.comments =
| Modifiable Field |
edit.properties.show.file.comments |
| Field Description |
Determines whether you see the comments in the
properties file when you edit the properties in the server UI. |
| Possible Values |
1 / 0 |
| Value Definition |
- 1
- The comments are displayed when you edit the properties.
- 0
- The comments are not displayed when you edit the properties.
|
edit.properties.show.translated.comments=
| Modifiable Field |
edit.properties.show.translated.comments |
| Field Description |
Determines whether you see the available globalized
comments in the properties file when you edit the properties in the
server UI. |
| Possible Values |
1 / 0 |
| Value Definition |
- 1
- The comments are displayed when you edit the properties.
- 0
- The comments are not displayed when you edit the properties.
|
| Modifiable Field |
date.time.format |
| Field Description |
Defines the way dates and times are input into
any date/time fields |
| Possible Values |
User-defined |
| Value Definition |
User-defined for example EEEE, dd MMMM yyyy, HH:mm:ss |
| Modifiable Field |
date.only.format |
| Field Description |
Defines the way dates are input into any date only
fields |
| Possible Values |
User-defined |
| Value Definition |
User-defined for example EEEE, dd MMMM yyyy |
| Modifiable Field |
time.only.format |
| Field Description |
Defines the way dates are input into any date only
fields |
| Possible Values |
User-defined |
| Value Definition |
User-defined for example: HH:mm:ss |
| Modifiable Field |
invalid.macs |
| Field Description |
List of target Mac addresses that are unacceptable
to send to the server in the target information. |
| Possible Values |
User Defined for example - 000000000001 |
| Value Definition |
|
| Modifiable Field |
invalid.assettags |
| Field Description |
List of target assettags that
are unacceptable to send to the server in the target information. |
| Possible Values |
User Defined for example, unknown |
| Value Definition |
|
| Modifiable Field |
invalid.net.addresses |
| Field Description |
List of target network addresses that are unacceptable
to send to the server in the target information. |
| Possible Values |
User Defined for example -0.0.0.0,127.0.0.0/8 |
| Value Definition |
|
report.timeout.frequency =
| Modifiable Field |
report.timeout.frequency |
| Field Description |
When a report is generated its output is cached,
so that it can be reloaded without the application going back to the
database for the data. The property report.timeout.frequency defines
the time value that the report output is cached for. |
| Possible Values |
User Defined |
| Value Definition |
|
report.manager.frequency =
| Modifiable Field |
report.manager.frequency |
| Field Description |
This property defines the time value for how often
the Report manager loops and re loads the report data from the database |
| Possible Values |
User Defined |
| Value Definition |
|
| Modifiable Field |
report.manager.period |
| Field Description |
Defines the time period that is used for report.timeout.frequency and report.timeout.frequency. |
| Possible Values |
User Defined. for example seconds, minutes, hours.
Default is minutes |
| Value Definition |
|
allow.target.group.override =
| Modifiable Field |
allow.target.group.override |
| Field Description |
Determines the group that a target is made a member
of during a silent target installation when the GROUP_LABEL parameter
is used. |
| Possible Values |
True or False |
| Value Definition |
- True
- The target is assigned to the target group that the GROUP_LABEL parameter
defines.
- False
- The target is assigned to the default target group that is defined
for the default.group.name property.
|
| Modifiable Field |
default.group.name |
| Field Description |
Defines the name that is given to the default group
of users |
| Possible Values |
User Defined. for example DefaultGroup |
| Value Definition |
|
Category Description: Default Non-Binary Policies
values
default.rc_def_inactivity =
| Modifiable Field |
default.rc_def_inactivity |
| Field Description |
Number of seconds to wait before the remote control
session connection stops automatically if there is no session activity. |
| Possible Values |
User Defined - seconds |
| Value Definition |
- 0 - disables the timer and the session does not time
out.
- less than 60 - session times out after 60 seconds.
- greater than 60 - session times out when the value is
reached.
|
default.rc_def_grace_time =
| Modifiable Field |
default.rc_def_grace_time |
| Field Description |
Sets the number of seconds to wait for the target
user to respond before a session starts or times out, used with Enable
user acceptance for incoming connections. |
| Possible Values |
User-defined - 0 - 60 seconds |
| Value Definition |
If set to 0, the session starts without displaying
the user acceptance window on the target. Default is 5 |
default.rc_def_timeout_op =
| Modifiable Field |
default.rc_def_timeout_op |
| Field Description |
Determines what action is taken if the user
acceptance window timeout lapses. That is, the target user does not
click accept or refuse within the number of seconds defined for Acceptance
Grace time |
| Possible Values |
ABORT or PROCEED |
| Value Definition |
- Abort
- Session is not started. Default is Abort.
- Proceed
- Session is started.
|
DO NOT EDIT THE FOLLOWING LINES
default.rc_def_local_audit
default.rc_def_pre_script =
default.rc_def_post_script=
YOU CAN EDIT THE FOLLOWING LINES
default.rc_def_script_op =
| Modifiable Field |
default.rc_def_script_op |
| Field Description |
Determines what action is taken if the prescript
execution fails. A positive value or 0 is considered as a successful
run of the pre-session script. A negative value, script not found,
or not finished running within 3 minutes is considered a failure. |
| Possible Values |
ABORT or PROCEED |
| Value Definition |
- Abort
- If the prescript run is a fail, the session does not start.
- Proceed
- If the prescript run is a fail, the session continues.
|
default.rc_def_insession_ft =
| Modifiable Field |
default.rc_def_insession_ft |
| Field Description |
Controls the transfer of files during an Active session.
Its value determines the availability of the Send file or Pull
file options in the File Transfer menu within
the controller window. |
| Possible Values |
NONE, BOTH, SEND, PULL |
| Value Definition |
- Set to NONE
- The Send file and Pull file options
are not available for selection. No file transfers can be initiated.
- Set to BOTH
- The Send file and Pull file options
are available for selection. Files can be transferred to the target
and transferred from the target. BOTH is the default value.
- Set to PULL
- Only the Pull file option is available
for selection. Files can be transferred only from the target.
- Set to SEND
- Only the Send file option is available
for selection. Files can be transferred only to the target.
|
DO NOT EDIT THE FOLLOWING LINES
default.rc_def_ft_actions =
default.rc_def_allowed_times
new.password.template
access.request.request.template
access.request.request.anon.template
access.request.reject.template
access.request.reject.anon.template
access.request.grant.template
access.request.grant.anon.template
YOU CAN EDIT THE FOLLOWING LINES
trc.feature.remote.install =
| Modifiable Field |
trc.feature.remote.install |
| Field Description |
Determines the availability of the Remote Install
function. |
| Possible Values |
True or False |
| Value Definition |
- True
- The Remote Install function is available in the Admin menu.
- False
- The Remote Install function is not available in the Admin menu.
Note: If
you set this property back to true, after it is set to false you must
restart the server service.
|
trc.feature.denied.program.execution.list =
| Modifiable Field |
trc.feature.denied.program.execution.list |
| Field Description |
Determines the availability of the Denied Program
Execution policy when you create groups or permissions links. |
| Possible Values |
True / False |
| Value Definition |
- True
- The Denied program execution list policy
is displayed on the Edit group screen and the Manage
Permissions screen.
- False
- The Denied program execution list policy
is not displayed on the Edit group screen and
the Manage Permissions screen.
Note: This feature works only on the following operating
systems
- Windows XP (32-bit editions
only)
- Windows Server 2003 (32-bit
editions only)
Note: If you set this property back to true, after it
is set to false, you must restart the server service. |
trc.ticket.allow.access =
| Modifiable Field |
trc.ticket.allow.access |
| Field Description |
Determines the availability of the Request
Access function. |
| Possible Values |
1 or 0 |
| Value Definition |
- 1
- The Request Access option is displayed
on the start session screen. This option allows the controller user
to temporarily access a target that they do not have permission to
access.
- 0
- The Request Access option is not displayed
on the start session screen and the Request Access menu
item is disabled.
|
trc.ticket.allow.allaccess =
| Modifiable Field |
trc.ticket.allow.allaccess |
| Field Description |
Determines the availability of the Request
Access function when a user who is not registered in IBM BigFix Remote Control tries
to access by using the anonymous URL. For more information about the
anonymous URL and how to request access to targets when you are not
a registered user in the IBM BigFix Remote Control Server,
see the IBM BigFix Remote Control Controller
User's Guide . |
| Possible Values |
1 or 0 |
| Value Definition |
- 1
- The Request Access to target screen is displayed when the user
types in the anonymous URL.
http://servername/trc/requestAccessAnon.do
where servername is
the address of your IBM BigFix Remote Control Server
- 0
- The logon screen is displayed when the user types in the anonymous
URL.
|
| Modifiable Field |
trc.ticket.admin |
| Field Description |
Defines the user group of administrators who receive
an email when an access request is submitted. |
| Possible Values |
User defined, for example: Adminemail.
Note:
- The group name must be a valid user group that is already defined
in the server.
- If this field is left blank, the email address that is set for
the property email.admin receives an email when
an access request is submitted.
|
| Value Definition |
The group name must be already defined in the database. |
| Modifiable Field |
trc.ticket.groupprefix |
| Field Description |
Defines the prefix that is assigned to the name
of the temporary user and target groups that are created when an access
request is granted. |
| Possible Values |
User-defined for example: t$t |
| Value Definition |
The temporary groups names are in the format P_R_G where
- P = trc.ticket.groupprefix property
- R = the request key value for the access request
- G = the group type U for user group, T for target group.
|
| Modifiable Field |
trc.ticket.priority |
| Field Description |
Defines the default priority level for access request
permissions. |
| Possible Values |
0, 1, or 5 |
| Value Definition |
The priority value that is used when you set permissions
for an access request. The value overrides any other permission values.
For example: 5 is the highest priority. 5 overrides 1 and 1 overrides
0. |
trc.default.request.priority =
| Modifiable Field |
trc.default.request.priority |
| Field Description |
Defines the priority value that is displayed first
in the priority list when you set the permissions for an access request. |
| Possible Values |
0, 1, 5 |
| Value Definition |
- 0
- 0 is displayed first in the list.
- 1
- 1 is displayed first in the list.
- 5
- 5 is displayed first in the list.
|
DO NOT EDIT THE FOLLOWING LINES
trc.ticket.temp.usergrpupdesc
trc.ticket.temp.targetgrpupdesc
THE FOLLOWING LINES CAN BE EDITED FOR YOUR ENVIRONMENT:
task.logdistribution.enabled =
| Modifiable Field |
task.logdistribution.enabled |
| Field Description |
Determines whether the logs that contain session
information are written to the IBM BigFix Remote Control Server. |
| Possible Values |
True or False |
| Value Definition |
- True
- The logs are written to the server to the location defined by task.logdistribution.path.
- False
- The logs are not written to the server.
|
task.logdistribution.path =
| Modifiable Field |
task.logdistribution.path |
| Field Description |
Determines the location that the log file that
contains session information is written to on the server. |
| Possible Values |
User defined. for example c:\logtask\logs |
| Value Definition |
|
DO NOT EDIT THE FOLLOWING LINE
task.logdistribution.file
YOU CAN EDIT THE FOLLOWING LINES
| Modifiable Field |
registry.title.X |
| Field Description |
Defines the name of the menu item that is displayed
in the registry keys menu. Use the menu to view the value for the
specific registry key that is defined by registry.key.X |
| Possible Values |
User defined. for example Services |
| Value Definition |
X = 0 - 9. |
| Modifiable Field |
registry.key.X |
| Field Description |
Defines the path to a specific registry key that
you can use to view its value on the target. |
| Possible Values |
User defined. for example HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services |
| Value Definition |
X = 0 - 9. |
| Modifiable Field |
nat.ip.support |
| Field Description |
Used to define the list of IP addresses that are
used by the server when a connection is made to a target when NAT
addresses are present. |
| Possible Values |
0, 1, 2, 3, 4 |
| Value Definition |
- 0
- IP=heartbeatlist.
Server uses the heartbeat list of IP addresses
to make a connection with the target.
- 1
- IP= heartbeatlist; source
Server uses the heartbeatlist list
of IP addresses then the source IP address to make a connection with
the target.
- 2
- IP = source;heartbeatlist
Server uses the
source IP address then the heartbeatlist of IP
addresses to make a connection with the target.
- 3
- IP = heartbeat;source
Server checks the
IP addresses that are listed in the nat.exclude.list property
to see whether the source IP is there. If it is not, the server uses
the heartbeatlist of IP addresses and then source
IP address to make a connection with the target.
- 4
- IP = source;heartbeat
Server checks the
IP addresses listed in the nat.exclude.list property
to see whether the source IP is there. If it is not, the server uses
the source IP and then the heartbeatlist of IP
addresses to make a connection with the target.
|
| Modifiable Field |
nat.exclude.list |
| Field Description |
Defines a list of NAT addresses that are ignored
by the server. |
| Possible Values |
User defined. |
| Value Definition |
|
match.allow.data.changes =
| Modifiable Field |
match.allow.data.changes |
| Field Description |
Is used to find a match for a target in the database
if a perfect match cannot be found. For more information about how
targets are registered, see Ensure targets are registered correctly. |
| Possible Values |
True or False |
| Value Definition |
- True
- This value is the default value. When set to true, a best match
is considered if all but 1 of the 4 perfect match criteria match an
already registered target.
- False
- If the perfect match process is enabled and no match is found
for all 4 of the target criteria, the best match option is not considered.
Depending on the value of match.change.notifications,
if no match is found then a new target entry is created in the database.
|
match.computername.only =
| Modifiable Field |
match.computername.only |
| Field Description |
Determines whether a targets computer name is used
to see whether it is already registered with the IBM BigFix Remote Control Server.
When a target contacts the server, its computer name is compared to
the computer names of the targets that are already registered with
the server. If a match is found, the details of the matched target
are updated. If no match is found, a new target entry is created.
For more information about how targets are registered, see Ensure targets are registered correctly. |
| Possible Values |
True or False |
| Value Definition |
- True
- When a target contacts the server, the targets computer name is
checked against the computer names of already registered targets.
If a match is found, the details of the matched target are updated
with the details of the target that is contacting the server. If no
match is found, a new target entry is created.
- False
- When a target contacts the server, the targets computer name is
not used to see whether the target is already registered with the
server.
|
| Modifiable Field |
match.guid.only |
| Field Description |
Determines whether a targets guid is
used to see whether it is already registered with the IBM BigFix Remote Control Server.
When a target contacts the server, its guid is
compared to the guid values of the targets that
are already registered with the server. If a match is found, the details
of the matched target are updated. If no match is found, a new target
entry is created. For more information about how targets are registered,
see Ensure targets are registered correctly. |
| Possible Values |
True or False |
| Value Definition |
- True
- When a target contacts the server, the targets guid is
checked against the guid values of already registered
targets. If a match is found, the details of the matched target are
updated with the details of the target that is contacting the server.
If no match is found, a new target entry is created.
- False
- When a target contacts the server, the targets guid is
not used to see whether the target is already registered with the
server.
|
match.change.notification =
| Modifiable Field |
match.change.notification |
| Field Description |
Use this property to force a target to save its
configuration details locally. If any of the target details change,
it can send the old details and its current details to the server.
The details can be used to try to find a match in the database. For
more information about how targets are registered, see Ensure targets are registered correctly. |
| Possible Values |
True or False |
| Value Definition |
- True
- This value is the default value. The target saves its details
locally to a file called tgt_info.proprties.
When the target contacts the server, it sends its old details and
its new details. The old details are used to try to find a perfect
match for the target in the database.
- False
- The old target details are not sent to the server and the new
changed details are used to try to find a match. However if only one
of the 4 criteria changes and the match.allow.data.changes property
is set to true, then a best match is looked for.
|
| Modifiable Field |
rc.tmr.at.registration |
| Field Description |
Determines whether a target is assigned to target
groups by using rules the first time it registers with the IBM BigFix Remote Control Server |
| Possible Values |
True or False |
| Value Definition |
- True
- When a target contacts the server for the first time, its computer
name and IP address is compared to the computer names and IP addresses
that are defined in the target membership rules. If a match is found,
the target is assigned to the target groups that are defined in the
matching rules.
- False
- When a target contacts the server for the first time, the targets
computer name and IP address are not checked against any defined rules.
|
rc.tmr.at.every.callhome =
| Modifiable Field |
rc.tmr.at.every.callhome |
| Field Description |
Determines whether a target is assigned to target
groups by using rules every time it contacts the IBM BigFix Remote Control Server |
| Possible Values |
True or False |
| Value Definition |
- True
- Every time that a target contacts the server its computer name
and IP address are compared to the computer names and IP addresses
that are defined in the target membership rules. If a match is found,
the target is assigned to the target groups that are defined in the
matching rules. Therefore, the targets group membership is recalculated
every time that it contacts the server.
- False
- Every time that a target contacts the server its computer name
and IP address are not checked against any defined rules.
|
rc.tmr.at.triggered.callhomes =
| Modifiable Field |
rc.tmr.at.triggered.callhomes |
| Field Description |
Determines whether a target is assigned to target
groups by using rules any time it contacts the IBM BigFix Remote Control Server because
of a change to its configuration or when it comes online. |
| Possible Values |
True or False |
| Value Definition |
- True
- When a target contacts the server because of a configuration change
or when it comes online, its computer name and IP address are compared
to the computer names and IP addresses that are defined in the target
membership rules. If a match is found, the target is assigned to the
target groups that are defined in the matching rules.
- False
- Any time a target contacts the server because of a configuration
change or when it comes online, its computer name and IP address is
not checked against any defined rules.
|
| Modifiable Field |
rc.tmr.at.rules.change |
| Field Description |
When a rule is added, edited, or deleted. Determines
whether the target group membership is altered for targets that were
assigned to target groups by using rules. |
| Possible Values |
True or False |
| Value Definition |
- True
- Applies to targets whose group membership was assigned by using
rules. Their group membership is recalculated whenever a rule is added,
edited, or deleted.
- False
- Applies to targets whose group membership was assigned by using
rules. Their group membership is not recalculated whenever a rule
is added, edited, or deleted.
|
DO NOT EDIT THE FOLLOWING LINES
hb.timeout.lookup.mode
hb.timeout.att.defn
THE FOLLOWING LINE CAN BE EDITED FOR YOUR ENVIRONMENT:
oracle.increment.keys.off =
| Modifiable Field |
oracle.increment.keys.off |
| Field Description |
Used as a workaround for a driver bug in the Oracle
JDBC versions 5 & 6 drivers that are included with Oracle 11g |
| Possible Values |
1 or 0 |
| Value Definition |
- 1
- Set to 1 if you are using the Oracle JDBC versions 5 & 6 drivers.
- 0
- Set to 0 if you are using JDBC 4 drivers (Oracle 10i) or if future
versions of the JDBC driver address the get autogenerated keys bug.
|
| Modifiable Field |
default.homepage.method |
| Field Description |
Used to determine whether the default home page
is a report, or the search targets page. This property is useful if
you have numerous targets in the IBM BigFix Remote Control database.
The default home page that is set by the server is the All
targets report. The report can take some time to load
if you have numerous targets. Then you must scroll through the report
to find the relevant target. If you set the search page as the home
page, you can search for specific targets as soon as you log on. |
| Possible Values |
report or search |
| Value Definition |
- report
- The default home page is set to the report that is defined by
the query in the default.query property. By default
it is the All targets report.
- search
- The default home page is set to the search targets page.
Note: This property is overridden if a home page is
already defined. For example,
- The user defines their own home page.
- A home page is defined for the user groups that the user belongs
to.
For more information about setting a home page, see Manage the home page for a user or group. |
workaround.rdp.console.w2k3 =
| Modifiable Field |
workaround.rdp.console.w2k3 |
| Field Description |
Used as a workaround for a Windows 2003 limitation. A remote control
session cannot capture the display if a remote desktop session has
taken place or is taking place on the target. |
| Possible Values |
0, 1 or 2 |
| Value Definition |
When a Remote Desktop user uses the /admin or /console option
to start a Remote Desktop session with a Windows Server 2003 system and an IBM BigFix Remote Control user
starts a remote control session before, during or after the Remote
Desktop session, remote control is unable to capture the display.
The result is that a gray screen is displayed in the controller. This
issue is a limitation in Windows Server
2003, therefore this property provides a workaround that will reset
the Windows session either
after each Remote Desktop session ends, or before an IBM BigFix Remote Control session
starts, depending on the value selected.
- 0
- The workaround is disabled. This value is the default value.
- 1
- Reset the session automatically when a remote control session
is started.
Note: The Windows sessions
take a couple of minutes to initialize and the controller sees a blank
desktop until the initialization is complete. A message is displayed
to inform the controller user that the session is being reset and
it might take a few minutes.
- 2
- Reset the session automatically when the Remote Desktop user logs
out.
Note:
- The value set for this property applies to all targets that are
registered with the server. You can set an attribute for a target
group to limit the action to selected targets. For more information
about the attribute, see Creating target groups. If the server
property has a different value to the target group attribute, the
target group value takes precedence for those targets who are members
of the specific target group.
- If a Remote Desktop session (admin or console) is in progress
when the controller attempts to connect to a target, a message is
displayed to the controller. The message provides details of the Remote
Desktop user and the IP address and computer name that the session
is running from.
|
target.search.minimum.nonwildcards =
| Modifiable Field |
target.search.minimum.nonwildcards |
| Field Description |
Sets the minimum number of non-wildcard characters
that are allowed to be entered when you search for a target. |
| Possible Values |
User-defined integer, default is 0. |
| Value Definition |
Determines the minimum non-wildcard characters
that must be entered in the search targets field on the search targets
page. For example set to 2 means that at least 2 non-wildcard characters
must be entered. For example, se or te.
If you enter less than the minimum characters, the following error
is displayed on the screen - The search string must contain
at least X non-wildcard characters. X is
the value set in the property. Note: If you set view.all.targets.auth to S or A,
you must set target.search.minimum.nonwildcards to
greater than 1. The reason is to prevent users who have user authority
from using the search targets page to display all targets. |
target.search.maximum.wildcards =
| Modifiable Field |
target.search.maximum.wildcards |
| Field Description |
Sets the maximum number of wildcard characters
that are allowed to be entered when you search for a target. The wildcard
characters that are allowed are *, %, * and _. |
| Possible Values |
User-defined integer, default is 0. |
| Value Definition |
The value set determines the maximum number of
wildcard characters that you can enter in the search targets field,
on the search targets page. For example, set to 1 means that only
1 wildcard characters can be entered. For example, se* or te*.
If you enter more than the maximum characters the following error
is displayed on the screen - The number of wildcards in the
search string cannot exceed X . X is
the value set in the property. |
To reduce the volume of unnecessary heartbeats the
following properties can be configured.
| Modifiable Field |
heartbeat.retry |
| Field Description |
If a target cannot contact the IBM BigFix Remote Control Server,
use this property to define the number of minutes that the target
waits before trying to contact it again. |
| Possible Values |
User-defined: minutes |
| Value Definition |
Default is 10. |
| Modifiable Field |
heartbeat.delay |
| Field Description |
The maximum delay in minutes that a target waits
between sending heartbeats to the IBM BigFix Remote Control Server. |
| Possible Values |
User-defined: minutes |
| Value Definition |
Default is 20 minutes. Prevent multiple heartbeats
in quick succession by delaying the actual heartbeat when a heartbeat
is triggered. |
| Modifiable Field |
heartbeat.on.wake |
| Field Description |
Trigger a heartbeat when the target system wakes
from standby or hibernation. |
| Possible Values |
1 or 0 |
| Value Definition |
- 1
- Trigger a heartbeat when the target system wakes from standby
or hibernation.
- 0
- Do not trigger a heartbeat when the target system wakes from standby
or hibernation. This value is the default value.
|
heartbeat.on.userchange =
| Modifiable Field |
heartbeat.on.userchange |
| Field Description |
Trigger a heartbeat when a user logs on or off |
| Possible Values |
1 or 0 |
| Value Definition |
- 1
- Trigger a heartbeat when a user logs on or off. This value is
the default value.
- 0
- Do not trigger a heartbeat when a user logs on or off.
|
| Modifiable Field |
heartbeat.on.change |
| Field Description |
Trigger a heartbeat when any of the values included
in a heartbeat change. |
| Possible Values |
1 or 0 |
| Value Definition |
- 1
- Trigger a heartbeat when any of the values included in a heartbeat
change. This value is the default value.
- 0
- Do not trigger a heartbeat when any of the values included in
a heartbeat change. This value is the default value.
|
| Modifiable Field |
heartbeat.on.stop |
| Field Description |
Trigger a heartbeat when the target is stopped
or the system is shutting down |
| Possible Values |
1 or 0 |
| Value Definition |
- 1
- Trigger a heartbeat when the target is stopped or the system is
shutting down.
- 0
- Do not trigger a heartbeat when the target is stopped or the system
is shutting down. This value is the default value.
Note: HeartBeatOnStop set to
1 is not recommended unless HeartBeatDelay is
set to 0. Otherwise, remote control sessions cannot be started while
the heartbeat is being delayed. |
| Modifiable Field |
broker.code.length |
| Field Description |
Determines the number of characters that are required
to be entered for the connection code. Enter the connection code when
you start a remote control session through an Internet Connection
Broker. |
| Possible Values |
User-defined integer. |
| Value Definition |
Default is 7. There is no limit to the number of
characters that can be set. However, you must use your discretion
when you set the value. |
| Modifiable Field |
broker.code.timeout |
| Field Description |
Determines the number of seconds the connection
code timer counts down from, before a new code is needed. The timer
is displayed on the controller when you start a remote control session
by using a broker. |
| Possible Values |
User defined. |
| Value Definition |
Default is 900. |
broker.trusted.certs.required =
| Modifiable Field |
broker.trusted.certs.required |
| Field Description |
Determines whether strict certificate validation
is enabled. |
| Possible Values |
true or false. |
| Value Definition |
- true
- Strict certificate validation is enabled. This value is the default
value.
- false
- Strict certificate validation is disabled.
|
rc.recording.filename.format =
| Modifiable Field |
rc.recording.filename.format |
| Field Description |
Specifies the file name format that is used in
the server to store the recordings |
| Possible Values |
User defined. Some formatting variables can be
added to the file name to customize it |
| Value Definition |
For example, trcrecording_%S_%D_%T.trc where %S is
placeholder for the session id of the recording %D is
placeholder for the date of the recording %T is
placeholder for the time stamp of the recording %H is
placeholder for the host name of the target |
