Welcome
Installation Guide
Learn the system requirements, licensing and installation instructions, and how to configure and maintain BigFix.
Installing the clients
Install the BigFix client on every computer in your network that you want to administer, including the computer that is running the console.
Installing the Client on Linux
The BigFix client can always be installed by manually running the client installer on each computer.
SUSE Linux Enterprise (64-bit) Installation Instructions
How to install the client on SUSE Linux Enterprise (64-bit).

BigFix Documentation Homepage
BigFix 11 Platform Documentation
Welcome to the BigFix Platform documentation, where you can find information about how to install, maintain, and use BigFix.
Detailed system requirements
The content of this page has moved to the HCL Support site. You will be redirected shortly. If the auto-redirect fails for some reason, use this link: https://support.hcltechsw.com/csm?id=kb_article&sysparm_article=KB0104120.
Platform guides in PDF format
Following is a list of links to the BigFix Platform user guides in PDF format:
Common Criteria Certification
BigFix 10.0.1.41 complies with the requirements of the standard ISO/IEC 15408 (Common Criteria) v. 3.1 for the assurance level: EAL2
Getting Started
Use this section to become familiar with BigFix infrastructure and key concepts necessary to understand how it works.
HTTPS across BigFix applications
This topic describes how the SSL/HTTPS communication works in BigFix applications and links the tasks on how to configure it.
Installation Guide
Learn the system requirements, licensing and installation instructions, and how to configure and maintain BigFix.
- Introduction
  BigFix aims to solve the increasingly complex problem of keeping your critical systems updated, compatible, and free of security issues. It uses patented Fixlet technology to identify vulnerable computers in your enterprise. With just a few mouse-clicks you can remediate them across your entire network from a central console.
- BigFix Platform Unicode Support Overview
  BigFix Platform V11 gathers data from BigFix clients deployed with different code pages and languages. It encodes all data into UTF-8 format, and reports it back to the BigFix server.
- Sample deployment scenarios
  The following deployment scenarios illustrate some basic configurations taken from actual case studies.
- Requirements and assumptions
  BigFix runs efficiently using minimal server, network, and client resources.
- Types of installation
  Before you install the product, decide if you want to do an evaluation or production installation.
- Managing licenses
  You must obtain a license key before you can install and use BigFix.
- Before installing
  Before running the installation make sure that you read the following topics and run the requested activities if needed.
- Installing on Windows systems
  Now that you understand the terms and the administrative roles, you are ready to get authorized and install the programs.
- Installing on Linux systems
  After understanding the terms and the administrative roles, you are ready to actually get authorized and install the programs.
- Installing the clients
  Install the BigFix client on every computer in your network that you want to administer, including the computer that is running the console.
  - Using the Client Deploy Tool
    You can use the Client Deploy Tool (CDT) to install Windows, UNIX and Mac target computers.
  - Installing the Client on AIX
    How to install the client on AIX.
  - Installing the Client on Linux
    The BigFix client can always be installed by manually running the client installer on each computer.
    - Amazon Linux Installation Instructions
      How to install the client on Amazon Linux.
    - CentOS Installation Instructions
      How to install the client on CentOS.
    - Oracle Linux Installation Instructions
      How to install the client on Oracle Linux.
    - Raspbian Installation Instructions
      How to install the client on Raspbian.
    - Red Hat Installation Instructions
      How to install the client on Red Hat.
    - Rocky Linux Installation Instructions
      How to install the client on Rocky Linux.
    - SUSE Linux Enterprise (64-bit) Installation Instructions
      How to install the client on SUSE Linux Enterprise (64-bit).
    - OpenSUSE Leap (64-bit) Installation Instructions
      How to install the client on OpenSUSE Leap (64-bit).
    - Ubuntu/Debian (64-bit) Installation Instructions
      How to install the client on Ubuntu/Debian (64-bit).
  - Installing the Client on Mac
    How to install the Mac client.
  - Installing the Client on Solaris 11
    As a prerequisite, all Solaris agents must have the SUNWlibC package installed.
  - Installing the Client on Windows
    You can install the BigFix client manually by running the Client installer on each computer.
  - Embedding in a Common Build
    If your organization employs a specific build image or common operating environment (COE) on a CD or image that is used to prepare new computers, you can include the Client in this build.
  - Avoiding duplicates when a Client is restored
    When the BigFix client is rolled back or restored from a snapshot, the next time it registers itself with the BigFix server, it receives a new Computer ID. The BigFix client with the old Computer ID becomes inactive because it does not report with the same Computer ID. As a result, the BigFix console shows duplicated entries for the same computer. Additionally, the affected computer loses all information: action history, discovery, and so on.
  - Enabling encryption on Clients
    When installed, you can set up your Clients to encrypt all outgoing reports to protect data such as credit card numbers, passwords, and other sensitive information.
- BigFix Administration Tool
  The BigFix Administration Tool, also called BESAdmin, is the tool we use to perform configuration changes and maintenance operations.
- Post-installation configuration steps
  After having run the installation, make sure that you read the following topics and run the requested activities if needed.
- Managing relays
  Relays can significantly improve the performance of your installation.
- Introduction to Tiny Core Linux - BigFix Virtual Relay
  Follow the step-by-step sequence of operations needed to build the virtual machine, from the downloading of the ISO image to the complete setup and configuration of the BigFix Virtual Relay.
- Setting up a proxy connection
  If your enterprise uses a proxy to access the Internet, your BigFix environment can use that communication path to gather content from sites.
- Running backup and restore
  You can schedule periodic backups (typically nightly) of the BigFix server and database files, to reduce the risk of losing productivity or data when a problem occurs by restoring the latest backup.
- Upgrading
  The steps to upgrade the BigFix Platform.
- SQL Server parallelism optimization
  The performance of an SQL Server database instance can often be improved by small tweaks. Performance might also be hindered by simple oversights. In fact, some SQL Server parallelism settings have suboptimal default values. Moreover, they have to be re-tuned after an hardware upgrade. Other issues might arise from inadvertent hardware configurations, especially when SQL Server is hosted on a virtual machine (VM).
- Known limitations and workarounds
  This section describes the known limitations and possible workarounds.
- Logging
  This section describes the log files associated with the BigFix components.
- Uninstalling the BigFix client
  To uninstall the BigFix client installed on the various operating systems, see the following sections.
Configuration Guide
Learn how to configure BigFix according to your needs.
Console Operator's Guide
Learn how to work with the BigFix Console.
Asset Discovery User's Guide
Learn how BigFix Asset Discovery works.
Web Reports Guide
Learn how the Web Reports feature extends the power of BigFix.
BigFix Explorer Guide
Learn how the BigFix Explorer feature extends the power of BigFix.
WebUI User's Guide
Read this guide for an introduction to the WebUI tools, concepts, and terminology.
WebUI Administration Guide
Read this guide for information about installing and administering the WebUI.
Glossary
This glossary provides terms and definitions for the Modern Client Management for BigFix software and products.

SUSE Linux Enterprise (64-bit) Installation Instructions

How to install the client on SUSE Linux Enterprise (64-bit).

Prerequisites

Before running the BigFix Client user interface in a GNOME desktop environment on SLES/SLED 15, download and install libXaw8-1.0.13-1.26.x86_64.rpm.
All RPM libraries installed on the system must be at the same level.

To install the client, do the following steps:

Disable the SELinux process.
Download the corresponding BigFix client RPM file to the SUSE computer.
Install the RPM by running the command
```
 rpm -ivh client_RPM_path
```
Copy your actionsite masthead to the client computer (the masthead contains configuration, license, and security information). The action site masthead (actionsite.afxm) can be found in your BES Installation folders (by default they are placed under C:\Program Files (x86)\BigFix Enterprise\BES Installers\Client on Windows and /var/opt/BESInstallers/Client/ on Linux). If the masthead is not named actionsite.afxm, rename it to actionsite.afxm and place it on the computer at the following location: /etc/opt/BESClient/actionsite.afxm.
Note: The directory /etc/opt/BESClient/ is not automatically created by the installer. If it does not exist, create it manually.
The masthead file for each BigFix server is downloadable at http://servername:port/masthead/masthead.afxm (example: http://bes.BigFix.com:52311/masthead/masthead.afxm).
Start the BigFix client by running the command:
```
systemctl start besclient
```
Up to BigFix Version 11.0.1, for backward compatibility reasons, you can also run the command:
```
/etc/init.d/besclient start
```
Note: When upgrading to BigFix Version 11.0.2 or later, the /etc/init.d/besclient file, if present, is removed by the upgrade process and the /etc/init.d/besclient start|stop|status|restart commands are no longer available.