Configuring Wi-Fi in StageNow

This topic provides step-by-step instructions for configuring Wi-Fi settings in a StageNow profile using the StageNow Workstation Tool. It covers accessing the Wi-Fi configuration, setting general Wi-Fi parameters, entering network credentials, and saving the configuration. Follow these steps to ensure your device connects to the correct enterprise Wi-Fi network during staging.

About this task

Follow these steps to configure a Wi-Fi setting profile within the StageNow Workstation Tool.

Procedure

  1. Access the Wi-Fi Configuration

    1. Open your active profile (e.g., Zebra_AMAPI_Enrollment) in the StageNow Workstation Tool.
    2. Select Wi-Fi from the profile sequence bar at the top or click ADD / EDIT to include the Wi-Fi setting.
  2. Configure General Wi-Fi Settings
  3. Add Network Credentials
    1. Under Target OS, ensure Android is selected.
    2. Under Wi-Fi Enable, choose Enable to ensure the Wi-Fi radio turns on automatically during staging.
    3. Select your desired Sleep Policy setting (e.g., Keep Wi-Fi on during sleep).

    1. Scroll to the network settings section and set Action to Add/Update Network.
    2. In the SSID field, enter your enterprise Wi-Fi network name.
    3. Select the appropriate Security Mode (e.g., WPA/WPA2-Enterprise or WPA/WPA2-PSK).
    4. Enter the required authentication credentials (e.g., Passphrase or Enterprise Security Certificate/Identity details).
  4. Save and Proceed
    1. Click Continue in the bottom-right corner to save the Wi-Fi parameters.
    2. Verify that the Wi-Fi step shows a green checkmark in the navigation bar before moving to the next configuration step (e.g., ConditionMgr, FileMgr, or AppMgr).
    3. Click Add to proceed through each configuration page.Complete the required parameter fields for each selected CSP and click Continue.