Welcome
Software inventory and license utilization
You can classify the discovered software so that reports in BigFix Inventory reflect your entitlements and properly show utilization of license metrics by particular products.
Software classification
After new components are discovered, they are assigned to products based on bundling rules. If the initial assignment does not reflect your entitlements, work with the software inventory until it matches the entitlements. To make metric calculation accurate, assign each component to a product, exclude, or suppress the instances that should not be included in the calculation, and confirm your actions. After you confirm the actions, the classification is complete, and the metric calculation is accurate.
Bundling Assistant
Bundling assistant assigns instances of discovered components to products based on five bundling rules: bundling tags, part numbers, partition collocation, infrastructure collocation, and stand-alone product discovery. Results of this assignment are shown on the Software Classification panel.
Partition collocation
Partition collocation is a rule that discovers component instances that are on the same partition and are related to a product in the software catalog. If any of the discovered component instances has a confirmed, or one-to-one relation to the product, the other instances are automatically bundled with the same product.

BigFix Documentation Homepage
BigFix 11 Inventory Documentation
Welcome to the BigFix Inventory documentation, where you can find information about how to install and configure BigFix Inventory. The application provides you with information about your inventory and license metrics. You can manage your software assets, gather information about your hardware, and ensure license compliance for your enterprise using BigFix Inventory.
BigFix Platform
BigFix Scanner (New)
Overview
Become familiar with key concepts that are necessary to understand how BigFix Inventory works and learn about features and functions that are introduced in every version of the application.
Installing
Learn about the requirements and available installation scenarios to ensure that the deployment of BigFix Inventory goes smoothly in your environment.
Configuring
After you install BigFix Inventory, configure the application. Create accounts for the users who need access to the application and set up scans to collect software and hardware inventory data from your environment.
Upgrading
A new version of BigFix Inventory is released periodically, typically at the end of each calendar quarter. Upgrade to the new version regularly to take full advantage of new features and application fixes.
Catalog Overview
This section provides information about catalog updates available with every release.
Managing the infrastructure
After you complete the initial configuration of BigFix Inventory, learn how to manage components of its infrastructure: VM managers, server, database, and data sources.
Software inventory and license utilization
You can classify the discovered software so that reports in BigFix Inventory reflect your entitlements and properly show utilization of license metrics by particular products.
- Collecting Oracle Measurements Data
  Starting from version 10.0.15, BigFix Inventory extends its capability to collect Oracle Java SE measurements data. Since version 10.0.16, BigFix Inventory also collects Oracle Database options and measurements data.
- Vendor-specific predefined dashboard
  Vendor-specific predefined reports available in dashboard Inventory Reports provide software discovery and licensing information for specific software vendors of BigFix Inventory customers. These reports help Software Asset Managers manage software for their vendors and prepare for contract negotiations and license audits. To view the reports, click on a vendor in the vendor-specific dashboard. The dashboard is also called Inventory Reports.
- Reported license metrics
  BigFix Inventory reports utilization for a number of license metrics for IBM and non-IBM products. It also shows products that are assigned any BigFix metric even if calculating utilization is not yet supported for this metric. It gives you an overview of all IBM metrics for which you should have licenses.
- Software classification
  After new components are discovered, they are assigned to products based on bundling rules. If the initial assignment does not reflect your entitlements, work with the software inventory until it matches the entitlements. To make metric calculation accurate, assign each component to a product, exclude, or suppress the instances that should not be included in the calculation, and confirm your actions. After you confirm the actions, the classification is complete, and the metric calculation is accurate.
  - Bundling Assistant
    Bundling assistant assigns instances of discovered components to products based on five bundling rules: bundling tags, part numbers, partition collocation, infrastructure collocation, and stand-alone product discovery. Results of this assignment are shown on the Software Classification panel.
    - Bundling tags
      Available from 9.2.5. Bundling tag is a type of the ISO/IEC 19770-2 supplemental tag. It allows for unambiguously assigning a component to a product and license metric based on the part number that is specified in the tag. When a bundling tag is available, it takes precedence over other bundling rules. Thus, you can create bundling tags to facilitate the process of software classification.
    - Part numbers
      Part numbers represent software products that you purchased and license metrics that these products use. Part numbers are used to increase the accuracy of bundling assistant by narrowing down the number of possible products to which a discovered component can be assigned.
    - Partition collocation
      Partition collocation is a rule that discovers component instances that are on the same partition and are related to a product in the software catalog. If any of the discovered component instances has a confirmed, or one-to-one relation to the product, the other instances are automatically bundled with the same product.
    - Infrastructure collocation
      Infrastructure collocation is a rule that discovers component instances that are installed in the same infrastructure and that are related to a specific product in the software catalog. The search does not include the agent on which the product is installed. If any of the discovered component instances has a confirmed, or one-to-one relationship with the product, the other instances are automatically bundled with the same product.
    - Stand-alone product discovery
      Stand-alone product discovery is a rule that identifies components that have more than one default component to product relation. For each relation, it compares the name of the component with the name of the product and calculates the Levenshtein distance. During the calculation, production components are assigned to production products, and non-production components such as trial, demonstration, limited, or express versions are assigned to non-production products. The algorithm does not favor shorter names, but names that have more letters in common. Based on the calculations, the product-component relation with the shortest distance (represented by the lowest score) is selected. If a few relations have the same score, they are ordered alphabetically.
  - Software Classification panel
    Available from 9.2.7. Software Classification panel provides an overview of your software inventory and the relations between the discovered software components and licensable products. It provides a flat structure with software installations broken into single components, which makes it easier to view your software assets and manage relations between them.
  - Using BigFix Inventory to calculate license for BigFix products
  - Setting entitlements
    It is recommended to first import IBM owned part numbers to improve bundling accuracy. Starting from BigFix Inventory 10.0.2, you can manually mark products as entitled through Product & Metrics panel. You can also clear entitlements of previous entitled products.
  - Assigning components to products
    Available from 9.2.7. After new components are discovered, they are associated with products based on bundling rules. As a result, most components are automatically assigned to products. Correct assignment of software components reduces the cost of software ownership and ensures audit readiness. Compare the automatically created bundles with information in your license agreement, confirm the accurate assignments, or reassign the components to right products.
  - Excluding and suppressing software instances
    Available from 9.2.7. If a software instance should not contribute to license metric utilization, you can exclude it on the product level or suppress it on the component level. Exclusion applies to all components that are assigned to a product and are installed on the selected computer. Use it if license information specifies that the product should not contribute to metric utilization under specific circumstances. Suppression applies to a single component that is installed on the selected computer. Use it when a component is improperly discovered.
  - Confirming assignment of software components
    Available from 9.2.7. When the assignment of a component to the product is correct, you can confirm it. The task is optional. However, components whose assignment is not confirmed can be automatically reassigned to different products. It might happen when a new software catalog is uploaded or when a different product is suggested as the best bundling option based on the new results of bundling assistant. To avoid such a situation, it is recommended to confirm the assignment of all components.
  - Creating and managing custom rules
    Available from 9.2.7. You can create custom rules to automate the process of software classification. The rules automatically perform the action that is defined by the rule criteria. For example, when you create a custom rule while assigning a component to a product, the rule is applied whenever the exact same component is discovered in the future.
  - Assigning products to Cloud Paks
    Available from 10.0.1 When you purchase a product as part of a Cloud Pak, assign instances of this product to the proper Cloud Pak to improve software tracking and calculate utilization of license metrics by Cloud Pak bundles.
  - Assigning products to FlexPoint bundles
    Available from 9.2.13. When you purchase a product as part of a FlexPoint bundle, assign instances of this product to that bundle for improved tracking and to calculate utilization of FlexPoints.
  - Setting the number of metric units convertible to FlexPoints
    Available from 9.2.13. When a software product is assigned to a FlexPoint bundle, BigFix Inventory converts the number of metric units that the product used to FlexPoints. If the product uses a license metric whose utilization is not calculated by BigFix Inventory, you can manually set the number of metric units to be converted into FlexPoints.
  - Viewing history of installed components
    Available from 9.2.7. You can view information about components that were installed in your infrastructure during a specific period and their assignment. You can use this information to view details of components that contributed to the overall license utilization for a specific period. You can also reassign and exclude uninstalled components if their original assignment was incorrect and impacted the license metric utilization.
  - Monitoring and reporting software usage
    BigFix Inventory collects listing of running processes and associate this data with detected software using usage signatures or by matching path.
- Server Software Catalog
  To correctly identify components of software products in your infrastructure, ensure that your server software catalog is always up-to-date. Periodically import a new server software catalog that contains the most recent software products. Also, manually add products that are installed in your infrastructure but do not have corresponding entries in the catalog.
- Reports
  Reports provide detailed information about the computers in your infrastructure and the software items that are installed on these computers. By viewing the reports regularly, you can check whether actual installations reflect the software inventory information and ensure that the capacity values are assigned to products correctly. You can decide what type of information you want to display by choosing the appropriate type of report. You can also customize the type and amount of information that is displayed in a report and save the report settings to reuse them.
- Enterprise applications inventory
  Software components are discovered during software scans. The scans correlate data that is collected from the computers with the content of the software catalog, and thus determine whether a component is installed. However, software scans do not discover details of some enterprise applications, for example licensable options of Oracle Database or editions of Microsoft Exchange. The details are discovered by dedicated fixlets. If you are interested in discovering additional details of enterprise applications, run the dedicated fixlets apart from scheduling software scans. Otherwise, running the fixlets is not required.
- License metrics
  BigFix Inventory provides two types of information about license metrics utilization: aggregated utilization and raw utilization. The former shows utilization of the assigned license metric by all instances of a particular product within the reporting period. However, it is limited to a subset of license metrics. The latter shows data that is collected from .slmtag files. It shows raw utilization of all license metrics that can be used by a particular product. The data is not aggregated and requires further processing.
- Contracts management
  The contracts management group shows all contract-related reports in one place. This allows you to easily manage all your contracts.
- Continuous Discovery Processing
  Continuous Discovery Processing is a systematic approach to identifying, analyzing, and integrating new information or insights into an ongoing workflow. This process ensures that organizations remain adaptive and responsive to changes in their environment, enabling them to make informed decisions and maintain a competitive edge. Stay effortlessly up-to-date and enjoy a more streamlined, hands-off experience.
- Software discovery in containers
  BigFix Inventory supports discovery of software in container images through standard discovery methods that includes catalog signatures, template signatures, installation registry and ISO SWID tags to cover traditional model of software deployment.
- Software data harvesting tool
Managing security threats
Learn how to use BigFix Inventory to manage security threats in your environment. You can view whether any of the installed components is prone to any Common Vulnerability and Exposure (CVE).
Tutorials
Tutorials help you understand how to use BigFix Inventory. They consist of modules that focus on broad goals. Modules consist of tasks that show how to configure specific settings step-by-step.
Security
Configure different security features to adequately protect business assets and resources in the data model when using BigFix Inventory.
Troubleshooting and support
Learn about solutions to common problems that might arise when you use BigFix Inventory BigFix Inventory and how to find logs and trace files that help you troubleshoot those problems.
Tuning performance
Learn how to plan the infrastructure of BigFix Inventory and to configure the application server to achieve optimal performance. The following guidelines are applicable in big data environments as well as in smaller environments that are running on low-performance hardware.
Integrating with REST API
External systems integration is one of the key features of BigFix Inventory. Business logic is enabled for integration and interfaces are provided for common integration points.
Glossary
Guide in PDF format
DataFlow ServiceNow Integration
Service Graph Connector Integration

Partition collocation

Partition collocation is a rule that discovers component instances that are on the same partition and are related to a product in the software catalog. If any of the discovered component instances has a confirmed, or one-to-one relation to the product, the other instances are automatically bundled with the same product.

Example

The assignment of the Server 2 component to Product 4 is simple, or manually confirmed. The database component is assigned to Product 1. Both components are on the same partition.

A graphic that shows relations between two components and two products that are on the same partition.

Based on the software catalog data, the database component is automatically reassigned to Product 4.
A graphic that shows bundling based on the software catalog data

A graphic that shows bundling based on the software catalog data

Components that are not evaluated

Some components are not evaluated as part of the partition collocation rule and do not affect other components that are installed on the same partition. The components include:

Tivoli Monitoring for Databases - <name> Agent
Tivoli Monitoring - <name> Agent

To add feedback about this topic, select the following checkbox:

By clicking this box, you acknowledge that you are NOT a U.S. Federal Government employee or agency, nor are you submitting information with respect to or on behalf of one. HCL provides software and services to U.S. Federal Government customers through its partners Four, Inc. Contact this team at https://hcltechsw.com/resources/us-government-contact. Do not include any personal data in this Comment box. Note: To report a problem or question about the product software, do not use this form. Instead, go to the HCL Software Support site. Personal data should not be shared in this comment box. See our Privacy Statement to understand how personal data is used.